Smoldering combustion of dust layer on hot surface

The critical temperature as well as the critical flux for ignition of a dust layer of cornflour and a mixture of wheatflour and cornflour (80% wheatflour+20% cornflour) on a hot plate have been determined. The moulded sample was cylindrical in shape and of different heights and diameters. The particle size of dusts ranged between 63 μm to 150 μm. The temperature–time histories for self-heating without ignition and with ignition are offered, showing the critical boundaries between them. Also the times to ignition for each dust, showing the effect of sample size on their values, are determined. Certain experimental correlations which relate to times to ignition, as well as the critical temperature for ignition and thermal and geometrical dimensions of sample are presented.     

Water quality monitoring of Al-Habbaniyah Lake using remote sensing and in situ measurements

Environmental Monitoring and Assessment - A good quality drinking water is essential for human survival. However, a large percentage of the populations in most developing countries (Nigeria...     

Towards saving freshwater: halophytes as unconventional feedstuffs in livestock feed: a review

Water represents 71% of all earth area and about 97% of this water is salty water. So, only 3% of the overall world water quantity is freshwater. Human can benefit only from 1% of this water and the remaining 2% freeze at both poles of earth. Therefore, it is important to preserve the freshwater through increasing the plants consuming salty water. The future prosperity of feed resources in arid and semi-arid countries depends on economic use of alternative resources that have been marginalized for long periods of time, such as halophytic plants, which are one such potential future resource. Halophyte plants can grow in high salinity water and soil and to some extent during drought. The growth of these plants depends on the contact of the salted water with plant roots as in semi-desert saline water, mangrove swamps, marshes, and seashores. Halophyte plants need high levels of sodium chloride in the soil water for growth, and the soil water must also contain high levels of salts, as sodium hydroxide or magnesium sulfate. There are many uses for halophyte plants, including feed for animals, vegetables, drugs, sand dune stabilizers, wind shelter, soil cover, wetland cultivation, laundry detergents, and paper production. This paper will focus on the use of halophytes as a feed additive for animals. In spite of the good nutritional value of halophytes, some anti-nutritional factors as nitrates, nitrite complexes, tannins, glycosides, phenolic compounds, saponins, oxalates, and alkaloids may be present in some of them. The presence of such anti-nutritional agents makes halophytes unpalatable to animals, which tends to reduce feed intake and nutrient use. Therefore, the negative effects of these plants on animal performance are the only objection against using halophytes in animal feed diets. This review article highlights the beneficial impact of considering halophytes in animal feeding on saving freshwater and illustrates its nutritive value for livestock from different aspects.     

Nanocarrier-mediated co-delivery systems for lung cancer therapy: recent developments and prospects

Environmental Chemistry Letters - Research has recently focused on combinational therapy using nanocarriers to overcome the obstacles associated with conventional therapy of lung cancer. The...     

Impacts of and adaptation to climate change on the oil palm in Malaysia: a systematic review

Environmental Science and Pollution Research - The interaction and the interplay of climate change with oil palm production in the Southeast Asia region are of serious concern. This particularly...     

Heavy-metal fractionation and distribution in soil profiles short-term-irrigated with sewage wastewater

Six soil profiles irrigated and non-irrigated with sewage wastewater were investigated for soil pH, electrical conductivity (EC), organic matter (OM), and CaCO₃. The distributions and chemical fractions of Cu, Zn, Cd, and Pb, and their lability were also studied. The results indicated that pH, EC, OM, and CaCO₃, as well as metal fractionation in soil profiles were affected by wastewater irrigation, especially in the surface layer. The surface layer (0-15 cm) irrigated with wastewater exhibited a 0.6 unit decrease in soil pH, a 40.6% decrease in CaCO₃, and a 200% increase in EC as compared with that of the non-irrigated soil. The soil OM increased from 0.04% to 0.35% in the surface layer. The irrigation of soil with wastewater resulted in transformation of metals from the carbonate fraction (CARB) towards the exchangeable (EXCH), Fe-Mn oxide (ERO), and organic (OM) fraction for Zn, towards the EXCH, the OM, and residual fraction for Cu, and towards the exchangeable (EXCH) fraction for Cd. It was concluded that the use of sewage wastewater led to salt accumulation and an increase in the readily labile fraction of Zn, Cu, and Cd in the surface layer. Therefore, this reason may limit the use of wastewater under arid and semi-arid conditions.     

Systematic development of an artificial neural network model for real-time prediction of ground-level ozone in Edmonton, Alberta, Canada

Ground-level ozone is a secondary pollutant that has recently gained notoriety for its detrimental effects on human and vegetation health. In this paper, a systematic approach is applied to develop artificial neural network (ANN) models for ground-level ozone (O3) prediction in Edmonton, Alberta, Canada, using ambient monitoring data for input. The intent of these models is to provide regulatory agencies with a tool for addressing data gaps in ambient monitoring information and predicting O3 events. The models are used to determine the meteorological conditions and precursors that most affect O3 concentrations. O3 time-series effects and the efficacy of the systematic approach are also assessed. The developed models showed good predictive success, with coefficient of multiple determination values ranging from 0.75 to 0.94 for forecasts up to 2 hr in advance. The inputs most important for O3 prediction were temperature and concentrations of nitric oxide, total hydrocarbons, sulfur dioxide, and nitrogen dioxide.     

Polychlorinated biphenyls and chlorinated pesticides in mussels from the Egyptian Red Sea coast

The residues of 17 organochlorine pollutants were analyzed in bivalve Brachiodontes sp. collected from 11 different locations in April 2000 along the Egyptian Red Sea coast. The pollutants studied were 10 individual polychlorinated biphenyl (PCB) congeners, alpha,alpha,alpha-hexachlorocyclohexane (HCHs), cyclodienes (heptachlor, heptachlorepoxide, aldrin, dieldrin) and dichlorodiphenyltrichloroethanes (DDTs) (p,p'-DDE, p,p'-DDD and p,p'-DDT). The concentration of total DDTs ranged between 125 and 772 ng/g of wet weight whereas the concentration of the PCBs, HCHs and cyclodienes ranged from 6.7 to 66.4 ng/g; 16.2 to 183.4 ng/g and 8.8 to 221.6 ng/g of wet weight, respectively. The levels are low to moderate in relation to the published data from other coastal areas. The present results indicate low to moderate PCBs and pesticides contamination in the investigated mussels except DDTs.     

Blood-Pb and hair-Pb levels in donor-matched samples

Lead concentrations in blood and scalp hair of 200 school boys, aged 6-8 years, were measured by electrothermal atomic absorption spectrometry. The mean blood-Pb concentration was 6.8 microg dl(-1) and the mean hair-Pb concentration was 9.7 microg g(-1) (dry weight). These values are well within the normal range for the respective tissues, indicating that the children studied are presently at relatively low risk from environmental lead pollution. A correlation analysis carried out on the data failed to show any statistically significant correlation (r = 0.13, p < 0.05) between the blood-Pb and hair-Pb concentrations.