Hydraulic conductivity of compacted clay liners permeated with inorganic salt solutions

Due to their low permeability, geosynthetic clay liners (GCLs) and compacted clay liners (CCLs) are the main materials used in waste disposal landfills. The hydraulic conductivity of GCLs and CCLs is closely related to the chemistry of the permeant fluid. In this study, the effect on the hydraulic conductivity of clays of five different inorganic salt solutions as permeant fluid was experimentally investigated. For this purpose, NaCl, NH(4)Cl, KCl, CaCl(2), and FeCl( 3) inorganic salt solutions were used at concentrations of 0.01, 0.10, 0.25, 0.50, 0.75 and 1 M. Laboratory hydraulic conductivity tests were conducted on low plasticity (CL) and high plasticity (CH) compacted raw clays. The change in electrical conductivity and pH values of the clay samples with inorganic salt solutions were also determined. The experimental test results indicated that the effect of inorganic salt solutions on CL clay was different from that on CH clay. The hydraulic conductivity was found to increase for CH clay when the salt concentrations increased whereas when the salt concentrations were increased, the hydraulic conductivity decreased for the CL clay.     

Adaptive neuro-fuzzy based modelling for prediction of air pollution daily levels in city of Zonguldak

Air pollution is a growing problem arising from domestic heating, high density of vehicle traffic, electricity production, and expanding commercial and industrial activities, all increasing in parallel with urban population. Monitoring and forecasting of air quality parameters in the urban area are important due to health impact. Artificial intelligent techniques are successfully used in modelling of highly complex and non-linear phenomena. In this study, adaptive neuro-fuzzy logic method has been proposed to estimate the impact of meteorological factors on SO2 and total suspended particular matter (TSP) pollution levels over an urban area. The model forecasts satisfactorily the trends in SO2 and TSP concentration levels, with performance between 75-90% and 69-80 %, respectively.     

Whitefly wax as a cue for phoresy in the broad mite, <Emphasis Type="Italic">Polyphagotarsonemus latus</Emphasis>(Acari: Tarsonemidae)

Summary. Broad mite, Polyphagotarsonemus latus (Acari: Tarsonemidae) exhibits a specific phoretic relationship with whiteflies. Under field conditions most broad mites, caught in sticky traps, are attached to whiteflies. Under laboratory conditions, attachment occurs equally well in the dark and light. Mites do not differentiate between the sexes of their phoretic host Bemisia tabaci. However, mite attachment to B. tabaci is greatly diminished by washing the host with various organic solvents, chloroform in particular. The effect of whitefly waxy particles on broad mite behavior was studied using wax from the whitefly Aleyrodes singularis and from the mealybug Planococcus citri. Broad mites were not only attracted specifically to the A. singularis waxy particles-treated leaf areas but were also attached to leaf trichomes in this area. The results of this study suggests the importance of olfactory cues from the whitefly waxy particles in the recognition process of the phoretic host and/or the induction of the attachment behavior to whitefly legs or leaf trichomes.     

Heavy metal mobility and potential availability in animal manure: using a sequential extraction procedure

In this study, dairy cow manure, goat manure, and chicken manure were collected from three farms and analyzed to find out the concentration of Cd, Co, Cr, Cu, Mn, Ni, Pb, and Zn. The concentration and potential of mobility and availability of heavy metals were studied in the animal manure samples. BCR Sequential extraction procedure was used to determine the binding forms of the metals. In this study, pseudo total concentrations of Mn and Zn were found out to be predominant in all the types of animal manure samples. According to the results, it was traced that Cr, Cu, and Ni were observed to be at the second highest level while Cd, Co, and Pb were seen at the lowest level in all the manure samples. When extractable amounts of heavy metals are taken into consideration, it is seen that the amount of the mobile fractions of heavy metals except for Cr and Ni are higher in comparison with that of immobile fraction in all the animal manure samples. It was also viewed that Mn, Cd, and Zn are more available in dairy cow manure and chicken manure whereas Cd, Co, and Mn are more available in goat manure.     

Traffic accident reconstruction and an approach for prediction of fault rates using artificial neural networks: A case study in Turkey

Objective: Currently, in Turkey, fault rates in traffic accidents are determined according to the initiative of accident experts (no speed analyses of vehicles just considering accident type) and there are no specific quantitative instructions on fault rates related to procession of accidents which just represents the type of collision (side impact, head to head, rear end, etc.) in No. 2918 Turkish Highway Traffic Act (THTA 1983). The aim of this study is to introduce a scientific and systematic approach for determination of fault rates in most frequent property damage–only (PDO) traffic accidents in Turkey.

Methods: In this study, data (police reports, skid marks, deformation, crush depth, etc.) collected from the most frequent and controversial accident types (4 sample vehicle–vehicle scenarios) that consist of PDO were inserted into a reconstruction software called vCrash. Sample real-world scenarios were simulated on the software to generate different vehicle deformations that also correspond to energy-equivalent speed data just before the crash. These values were used to train a multilayer feedforward artificial neural network (MFANN), function fitting neural network (FITNET, a specialized version of MFANN), and generalized regression neural network (GRNN) models within 10-fold cross-validation to predict fault rates without using software. The performance of the artificial neural network (ANN) prediction models was evaluated using mean square error (MSE) and multiple correlation coefficient (R).

Results: It was shown that the MFANN model performed better for predicting fault rates (i.e., lower MSE and higher R) than FITNET and GRNN models for accident scenarios 1, 2, and 3, whereas FITNET performed the best for scenario 4. The FITNET model showed the second best results for prediction for the first 3 scenarios. Because there is no training phase in GRNN, the GRNN model produced results much faster than MFANN and FITNET models. However, the GRNN model had the worst prediction results. The R values for prediction of fault rates were close to 1 for all folds and scenarios.

Conclusions: This study focuses on exhibiting new aspects and scientific approaches for determining fault rates of involvement in most frequent PDO accidents occurring in Turkey by discussing some deficiencies in THTA and without regard to initiative and/or experience of experts. This study yields judicious decisions to be made especially on forensic investigations and events involving insurance companies. Referring to this approach, injury/fatal and/or pedestrian-related accidents may be analyzed as future work by developing new scientific models.     

Impacts of repeated timber skidding on the chemical properties of topsoil, herbaceous cover and forest floor in an eastern beech (Fagus orientalis Lipsky) stand

In this study, long-term timber skidding effects on herbaceous understory forest floor and soil were investigated on a skid road in a stand of the eastern beech (Fagus orientalis Lipsky). For this purpose, herbaceous understory forest floor and soil samples were collected from the skid road and from an undisturbed area used as a control plot. The mass (kg ha(-1)) of herbaceous and forest floor samples was determined, and soil characteristics were examined at two depths (0-5 cm and 5-10 cm). We quantified sand, silt and clay content, as well as bulk density compaction, pH, and organic carbon content in soil samples. The quantities of N, K, P, Na, Ca, Mg, Fe, Mn, Zn and Cu were determined in all herbaceous cover forest floor and soil samples. The quantities of Na, Fe, Zn, Cu and Mn in herbaceous understory samples from the skid road were considerably higher than those in the undisturbed area, while the quantity of Mg was considerably lower. These differences could have been caused by decreased herbaceous cover in addition to variations in the properties of the forest floor and soil after skidding. A lower amount of forest floor on the skid road was the result of skidding and harvesting activities. Mg and Zn contents in forest floor samples were found to be considerably lower for the skid road than for the undisturbed area. No significant differences were found in soil chemical properties (quantities of N, P, K, Na, Ca, Mg, Fe, Zn, Cu and Mn) at the 0-5 cm soil depth. Important differences exist between soil quantities of Mg at a 5-10 cm depth on the skid road and in undisturbed areas. Both 0-5 cm and 5-10 cm soil depths, the average penetrometer resistance values for the skid road was higher than for the undisturbed area. This result shows that the compaction caused by skidding is maintained to depth of 10 cm. Skid road soil showed higher bulk density values than undisturbed areas because of compaction.     

Using Design-Expert to Optimize the Properties of a Polyethersulfone Ultrafiltration Membrane Through the Incorporation of NH2-MIL-53(Fe) and PVP for Maximum Cr(VI) Removal and Flux

Journal of Polymers and the Environment - In this study, an NH2-MIL-53(Fe) functionalized membrane was fabricated for Cr(VI) removal from contaminated groundwater. Design-Expert was employed to...     

Determination of Impact of Urbanization on Agricultural Land and Wetland Land Use in Balçovas’ Delta by Remote Sensing and GIS Technique

Because of their intense vegetation and the fact that they include areas of coastline, deltas situated in the vicinity of big cities are areas of greet attraction for people who wish to get away from in a crowded city. However, deltas, with their fertile soil and unique flora and fauna, need to be protected. In order for the use of such areas to be planned in a sustainable way by local authorities, there is a need for detailed data about these regions. In this study, the changes in land use of the Balçova Delta, which is to the immediate west of Turkey’s third largest city Izmir, from 1957 up to the present day, were investigated. In the study, using aerial photographs taken in 1957, 1976 and 1995 and an IKONOS satellite image from the year 2005, the natural and cultural characteristics of the region and changes in the coastline were determined spatially. Through this study, which aimed to reveal the characteristics of the areas of land already lost as well as the types of land use in the Balçova delta and to determine geographically the remaining areas in need of protection, local authorities were provided with the required data support. Balçova consists of flat and fertile wetland with mainly citrus-fruit orchards and flower-producing green houses. The marsh and lagoon system situated in the coastal areas of the delta provides a habitat for wild life, in particular birds. In the Balçova Delta, which provides feeding and resting for migratory birds, freshwater sources are of vital importance for fauna and flora. The settlement area, which in 1957 was 182 ha, increased 11-fold up to the year 2005 when it reached 2,141 ha. On the other hand, great losses were determined in farming land, olive groves, forest and in the marsh and lagoon system. This unsystematic and rapid urbanization occurring in the study region is not only causing the loss of important agricultural land and wetland, but also lasting water and soil pollution.     

Concentrations of cadmium and lead heavy metals in Dardanelles seawater

Cadmium and lead were determined simultaneously in seawater by differential pulse stripping voltammetry (DPSV) preceded by adsoptive collection of complexes with 8-hydroxyquinoline (oxine) on to a hanging mercury drop electrode (HMDE). In preliminary experiments the optimal analytical condition for oxine concentration was found to be 2.10⁻⁵ M, at pH 7.7, the accumulation potential was −1.1 V, and the initial scannig potential was −0.8 V. The peak potentials were found −0.652 V for Cd and −0.463 V for Pb At the 60 s accumalation time. The limit of detection (LOD) and limit of quantitatification (LOQ) were found to be by voltammetry as 0.588 and 1.959 μg l⁻¹ (RSD, 5.50%) for Cd and 0.931 and 3.104 μg l⁻¹ (RSD, 4.10%) for Pb at 60 s stirred accumulation time respectively. In these conditions the most of the seawater samples are amenable for direct voltammetric determination of cadmium and lead using a HMDE. An adsorptive stripping mechanism of the electrode reaction was proposed. For the comparison, seawater samples were also analysed by ICP-atomic emission spectrometry method (ICP-AES). The applied voltammetric technique was validated and good recoveries were obtained.     

Acute toxicity of alpha-cypermethrin to guppy (Poecilia reticulata, Pallas, 1859)

Alpha-cypermethrin is a synthetic pyrethroid insecticide used to control pests in domestic, industrial and agricultural situations. Adult male guppy fish (Poecilia reticulata standard test species) were selected for the bioassay experiments. The experiments were performed in four series and the 96-h LC50 value was determined for guppies. The acute toxicity experiments were carried out by static method and behavioral changes in guppies were determined for each alpha-cypermethrin (98% technical grade) concentration. Data obtained from the alpha-cypermethrin investigation were evaluated by the use of probit analysis statistical method and the 96-h LC50 value for guppy was estimated as 9.43 microg/l.