Fish Bone as a Low-Cost Adsorbent for Dye Removal from Wastewater: Response Surface Methodology and Classical Method

This research studied the application of fish bone as a low-cost adsorbent for the removal of two basic dyes (C.I. Basic Blue 41 and C.I. Basic Yellow 28) from textile wastewaters. The surface morphology and functional groups of the fish bone was studied by scanning electron microscopy and Fourier transform infrared, respectively. The experiments were designed in two methods: classical method and response surface methodology (RSM). The effect of operating parameters including pH, initial dye concentration, adsorbent dosage, and inorganic salts was investigated by both methods. The optimum conditions to satisfy 75 % of dye removal for both dyes were predicted by RSM method and the results were very close to the experimental values. So, it was concluded that the fish bone can be used as a low-cost adsorbent for dye removal from effluents.     

Exploring Land Developer Perspectives on Conservation Subdivision Design and Environmentally Sustainable Land Development

Insight into land developers’ perspectives on alternative residential developments and the barriers they experience in trying to develop them can be crucial in efforts to change environmentally damaging low-density, large-lot, and automobile-dependent residential patterns. Using a semi-structured interview instrument followed by short surveys, I examined the views of 16 developers in Waukesha County, WI, USA, a county that has experienced significant development pressures and widespread implementation of conservation subdivision design. The land developer investigation focused on conservation subdivision design familiarity and implementation, and identified a number of barriers that developers experienced in implementing the design. While the majority of the developers appeared familiar with the design and had experience developing conservation subdivisions, their motivations for developing them varied, as did their on-site conservation practices. The barriers included the lack of land use regulations supporting the design, economic factors, community opposition, and a lack of knowledge about sustainable residential development practices. Strategies to promote more environmentally sustainable residential land development patterns include providing a more supportive institutional environment, enacting different regulations and guidelines for natural resources protection, and offering education on ecologically sound development and planning practices.     

The effect of fiscal decentralization,environmental regulation,and economic development on haze pollution: empirical evidence for 270 Chinese cities during 2007–2016

The current discourse addresses fiscal issues, financial decentralization, and environmental quality and significantly affects economic development and sustainability. This investigation aims to address the research gap in fiscal decentralization and haze pollution for innovation and sustainable growth. This study uses the annual data of 270 Chinese cities from 2007 to 2016 for comprehensive analysis and employs spatial regression methods. The key findings imply that haze pollution in neighbouring cities causes further ecological issues. While the environmental regulations of China tend to have negative impacts on pollution, fiscal decentralization was found to be a key contributor to environmental pollution in Chinese cities. Overall, the study supports the validity of the pollution refuge hypothesis in China. Lastly, the conclusions allow us to conclude that China might need micro-level reforms regarding fiscal decentralization, environmental tax laws, and encouragement of cleaner production technologies.

     

Exposure to ionizing radiations and changes in blood cells and interleukin-6 in radiation workers

Environmental Science and Pollution Research - Long-term exposure to ionizing radiation (IR) can cause dire health consequences even less than the dose limits. Previous biomonitoring studies have...     

Evaluation of a novel hollow fiber membrane technique for collection of 1,1-dimethylhydrazine in air

The purpose of this study was to develop a novel one-step method for the time-weighted average determination of 1,1-dimethylhydrazine (UDMH) in the air followed by spectrophotometric detection. For this reason, 0.1% hydrochloric acid as the absorbent was used in hollow fiber (HF) membrane for sampling of UDMH from an atmospheric standard chamber. Response surface methodology (RSM) with central composite design (CCD) was used to optimize the sampling parameters, such as flow rate and sampling time. Moreover, several analytical parameters including breakthrough (BT) volume, storage time, and carryover effect of the proposed HF were investigated. The results showed that optimal sampling rate was 9.90 mL/min. In order to validate the proposed method, it was compared with the National Institute for Occupational Safety and Health (NIOSH) 3515 method, which showed good compatibility between the two methods. Intra- and inter-day repeatability values of the HF method were in the range 0.082–0.1 and 0.091–0.12, respectively, and the limits of detection (LODs) and limits of quantitation (LOQs) were 0.002 and 0.006 ng/mL, respectively. The storage time of the proposed HF was 7 days at 2 °C. These results demonstrated that the one-step HF membrane offered a high sensitivity for sampling of UDMH in air.     

Color removal from wastewater using a synthetic high-performance antifouling GO-CPTMS@Pd-TKHPP/polyether sulfone nanofiltration membrane

Modified graphene oxide with 5,10,15,20-tetrakis-(4-hexyloxyphenyl)-porphyrin and palladium (II) (signified by GO-CPTMS@Pd-TKHPP) prepared as a novel antifouling polyether sulfone (PES) blended nanofiller membrane. The membrane efficiency has been analyzed such as pure water flux (PWF), hydrophilicity, and antifouling features. By increasing of modified graphene oxide percentage from 0 to 0.1 wt.% in the polymer matrix, the PWF was incremented from 14.35 to 37.33 kg/m²·h at 4 bar. The membrane flux recovery ratio (FRR) has been investigated by applying powdered milk solution; the FRR results indicated that the 0.1 wt.%-modified graphene oxide membrane showed a positive effect on fouling behavior with Rir and FRR value 8.24% and 91.76%, respectively. The nanofiltration membrane performance was assessed applying the Direct Red 16 dye rejection. It was demonstrated that the optimal membranes (0.1 wt.%-modified graphene oxide) had notable dye removal (99.58% rejection). The results are also verified by measuring the scanning electron microscopy (SEM), water contact angle (WCA), and atomic microscopy analysis (AFM).

     

Numerical modelling of the groundwater inflow to an advancing open pit mine: Kolahdarvazeh pit,Central Iran

The groundwater inflow into a mine during its life and after ceasing operations is one of the most important concerns of the mining industry. This paper presents a hydrogeological assessment of the Irankuh Zn-Pb mine at 20 km south of Esfahan and 1 km northeast of Abnil in west-Central Iran. During mine excavation, the upper impervious bed of a confined aquifer was broken and water at high-pressure flowed into an open pit mine associated with the Kolahdarvazeh deposit. The inflow rates were 6.7 and 1.4 m³/s at the maximum and minimum quantities, respectively. Permeability, storage coefficient, thickness and initial head of the fully saturated confined aquifer were 3.5?×?10^?4 m/s, 0.2, 30 m and 60 m, respectively. The hydraulic heads as a function of time were monitored at four observation wells in the vicinity of the pit over 19 weeks and at an observation well near a test well over 21 h. In addition, by measuring the rate of pumping out from the pit sump, at a constant head (usually equal to height of the pit floor), the real inflow rates to the pit were monitored. The main innovations of this work were to make comparison between numerical modelling using a finite element software called SEEP/W and actual data related to inflow and extend the applicability of the numerical model. This model was further used to estimate the hydraulic heads at the observation wells around the pit over 19 weeks during mining operations. Data from a pump-out test and observation wells were used for model calibration and verification. In order to evaluate the model efficiency, the modelling results of inflow quantity and hydraulic heads were compared to those from analytical solutions, as well as the field data. The mean percent error in relation to field data for the inflow quantity was 0.108. It varied between 1.16 and 1.46 for hydraulic head predictions, which are much lower values than the mean percent errors resulted from the analytical solutions (from 1.8 to 5.3 for inflow and from 2.16 to 3.5 for hydraulic head predictions). The analytical solutions underestimated the inflow compared to the numerical model for the time period of 2–19 weeks. The results presented in this paper can be used for developing an effective dewatering program.     

Field application of SPME as a novel tool for occupational exposure assessment with inhalational anesthetics

Occupational exposure to inhalational anesthetics occurs routinely in operating rooms. It could induce serious health hazards and diseases. This exposure assessment is a crucial step in determining risks. In this study, a pen-shaped holder for solid-phase microextraction (SPME) sampler was successfully applied as a time-weighted average sampling tool for workshift exposure assessment of operation room staff to halothane. It proved to be very convenient for use in occupational environments such as operation rooms. Samples were analyzed by a gas chromatography-mass spectrometry. The validity of the SPME method was checked in real-world conditions with Occupational Safety and Health Administration (OSHA) 103 standard method for the determination of inhalational anesthetics. A good agreement between OSHA 103 and SPME methods was obtained and results demonstrated no statistically significant differences in anesthetic concentrations determined by the two analytical methods (p?≥?0.05). It is concluded that SPME in retracted mode could successfully be applied in occupational exposure assessment purposes.     

Site selection for waste vegetable oil and waste battery collection boxes: a GIS-based hybrid hesitant fuzzy decision-making approach

Environmental Science and Pollution Research - The amount of municipal solid waste (MSW) has been increasing rapidly in the urban centres of developing countries during the last few decades;...