Assessing heavy metal pollution in the surface soils of a region that had undergone three decades of intense industrialization and urbanization

Heavy metals in the surface soils from lands of six different use types in one of the world’s most densely populated regions, which is also a major global manufacturing base, were analyzed to assess the impact of urbanization and industrialization on soil pollution. A total of 227 surface soil samples were collected and analyzed for major heavy metals (As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn) by using microwave-assisted acid digestion and inductively coupled plasma–mass spectrometry (ICP-MS). Multivariate analysis combined with enrichment factors showed that surface soils from the region (>7.2?×?10⁴ km²) had mean Cd, Cu, Zn, and As concentrations that were over two times higher than the background values, with Cd, Cu, and Zn clearly contributed by anthropogenic sources. Soil pollution by Pb was more widespread than the other heavy metals, which was contributed mostly by anthropogenic sources. The results also indicate that Mn, Co, Fe, Cr, and Ni in the surface soils were primarily derived from lithogenic sources, while Hg and As contents in the surface soils were controlled by both natural and anthropogenic sources. The pollution level and potential ecological risk of the surface soils both decreased in the order of: urban areas?>?waste disposal/treatment sites?～?industrial areas?>?agricultural lands?～?forest lands?>?water source protection areas. These results indicate the significant need for the development of pollution prevention and reduction strategies to reduce heavy metal pollution for regions undergoing fast industrialization and urbanization.     

Conditioning of aluminium-based water treatment sludge with Fenton's reagent: effectiveness and optimising study to improve dewaterability

Alternative conditioning of aluminium-based drinking water treatment sludge using Fenton reagent (Fe2+/H2O2) was examined in this study. Focuses were placed on effectiveness and factors to affect such novel application of Fenton process. Experiments have demonstrated that considerable improvement of alum sludge dewaterability evaluated by capillary suction time (CST) can be obtained at the relative low concentrations of Fenton reagent. A Box-Behnken experimental design based on the response surface methodology was applied to evaluate the optimum of the influencing variables, i.e. iron concentration, hydrogen peroxide concentration and pH. The optimal values for Fe2+, H2O2, and pH are 21 mg g(-1)DS(-1)(dry solids), 105 mg g(-1)DS(-1) and 6, respectively, at which the CST reduction efficiency of 48+/-3% can be achieved, this agreed with that predicted by an established polynomial model in this study.     

Multivariate statistical study of heavy metal enrichment in sediments of the Pearl River Estuary

The concentrations and chemical partitioning of heavy metals in the sediment cores of the Pearl River Estuary were studied. Based on Pearson correlation coefficients and principal component analysis results, Al was selected as the concentration normalizer for Pb, while Fe was used as the normalizing element for Co, Cu, Ni and Zn. In each profile, sections with metal concentrations exceeding the upper 95% prediction interval of the linear regression model were regarded as metal enrichment layers. The heavy metal accumulation mainly occurred at sites in the western shallow water areas and east channel, which reflected the hydraulic conditions and influence from riparian anthropogenic activities. Heavy metals in the enrichment sections were evaluated by a sequential extraction method for possible chemical forms in sediments. Since the residual, Fe/Mn oxides and organic/sulfide fractions were dominant geochemical phases in the enriched sections, the bioavailability of heavy metals in sediments was generally low. The 206Pb/207Pb ratios in the metal-enriched sediment sections also revealed the influence of anthropogenic sources. The spatial distribution of cumulative heavy metals in the sediments suggested that the Zn and Cu mainly originated from point sources, while the Pb probably came from non-point sources in the estuary.     

Pollution characteristics of 23 veterinary antibiotics in livestock manure and manure-amended soils in Jiangsu province,China

The aim of this study was to investigate the pollution characteristics of typical veterinary antibiotics in manure and soil of livestock farms in Jiangsu province. This investigation employed solid-phase extraction (SPE) coupled with ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). A total of 53 manure and 50 amended soil samples from 16 livestock farms in Jiangsu province were collected for analysis. In the manure samples, the highest detected frequencies and concentrations were those of tetracyclines (TCs, 54.1 ± 5775.6 μgkg^?1), followed by fluoroquinolones (FQs, 8.4 ± 435.6 μgkg^?1), sulphonamides (SAs, 3.2 ± 5.2 μgkg^?1) and macrolides (MACs, 0.4 ± 110.5 μgkg^?1). Statistical analysis was used to illuminate the pollution characteristics of 23 veterinary antibiotics for various animal types and different regions in Jiangsu province. The results showed that the pollution level in cow manure was relatively lower compared with pig and chicken manure due to the relative restriction of medication. Furthermore, contamination was serious in amended soil from chicken farms. The pollution level in manure among different regions was higher to the south and north compared with the centre of the region. The same outcome was found for soil. Antibiotic residues in organic fertilizer were also investigated in this study. We found that although the detected concentration was lower in organic fertilizer than in fresh manure, detection frequencies (10–90%) were high, especially for roxithromycin (90%) in MACs (30–90%). This finding suggests attention should be paid to the pollution levels in organic fertilizer. This study is the first extensive investigation of the occurrence and distribution of many kinds of typical veterinary antibiotics in manure and soil from livestock farms of Jiangsu province. This investigation systematically assesses veterinary antibiotics usage and related emissions in southeast China.     

Uptake of weakly hydrophobic nitroaromatics from water by semipermeable membrane devices (SPMDs) and by goldfish (Carassius auratus)

Semipermeable membrane devices (SPMDs) filled with triolein, and goldfish (Carassius auratus) were simultaneously exposed to nine weakly hydrophobic nitroaromatics in a laboratory continuous-flow experiment. The results showed that the device concentrated the compounds in most cases to a larger extent than fish and that the overall uptake rate constants (Kmu) and average pollutant sampling rates (R(S)) were similar. We conclude that the SPMDs may be used to determine the levels of weakly hydrophobic nitroaromatics in water. It is obvious, however, that more researches at laboratory in order to establish kinetic database for a wide spectrum of compounds varying in lipophilicity and other properties are needed to elucidate various theoretical and practical aspects of the use of membranes in the environmental research and for related practical applications.     

Dust Storms are an Indication of an Unhealthy Environment in East Asia

Dust storms frequently occur in Mongolia and in northern China. Each year there are 30 to 120 dusty days in source regions of Mongolia and 14–20 dusty days on the Korean Peninsula. Intense sand storms and associated dust falls produce environmental impacts in East Asia. This paper discusses the environmental degradation in Mongolia and the social, economic and atmospheric impacts of dust storms in the sink area. The impact of dust storms on environmental compartments as well as their direct and indirect consequences to basic resources like water and energy demand and supply is explained. Governments are encouraged to take appropriate action in specified regions. For monitoring dust storms there is a need for international cooperation to combat growing environmental and human security concerns.     

钢桁架-钢筋混凝土管柱结构风参数试验研究

结构下部空旷,上部挡风墙承担的风荷载对结构下部产生较大作用。我国规范没有对该类结构及其顶部透气性A型架的风参数作具体规定。为解决工程设计中风参数取值问题,进行了刚性模型风洞试验研究,得到了不同工况下挡风墙、A型架、管柱的体型系数及挡风墙的阵风系数,分析了风机、周围建筑物、风向角对相关风参数的影响,给出了相关参数的建议值。并将试验结果与数值模拟计算结果进行了对比分析,结果表明,二者吻合较好,研究结果为工程设计提供了基础资料,可供同类工程参考。     

垃圾焚烧飞灰物理化学性质的实验研究

应用激光粒度粒形分析仪、灰熔融性测定仪、原子吸收光谱仪和XRD等仪器手段对国内2种垃圾焚烧飞灰的密度、颗粒特性、熔点、成分和晶相结构等物理化学性质进行了详细的研究。研究发现，2种灰样颗粒直径的数量积分分布非常接近，其中基本没有超过40 μm的颗粒。由于垃圾焚烧飞灰在化学成分上存在的差异导致了其熔点有很大的不同。此外，XRD结果显示不同来源的飞灰其晶相结构存在较大的差别，这可能与垃圾的来源和焚烧工艺以及烟气处理方法有关。实验结果为飞灰无害化低温烧结工艺的选择和运行参数的制定提供了依据。     

Melting and stone production using MSW incinerated ash

Most of the municipal solid waste (MSW) in Japan is incinerated and the generated ash is landfilled. However, environmental pollution problems have increased and Japan has decreased final disposal sites for landfills. With the application of a melting system, the volume of incinerated ash can be reduced and the effective use of melted slag is being developed for use in civil engineering works. However, the low strength of melted slag as a vitreous structure has limited its effective use. As a solution for this deficiency, a technology to crystallize melted slag into higher strength produced stones was developed. With the joint cooperation of Chiba Prefecture and Kamagaya City, a demonstration plant for melting and stone production with a capacity of 4.8 tons of incinerator ash per day was constructed. The demonstration test was conducted from May 1998 to June 1999 with satisfactory results stated below. Long-term stable operation and performance of the plant have been confirmed and effective applications of produced stones have been demonstrated on a commercial scale. The results are as follows. 1. A stable, continuous operation and good quality produced stones have been confirmed by treating more than 750 tons of MSW incinerated ash. 2. More than 99.9% of dioxins contained in the incinerated ash were decomposed, and the concentration of dioxins in produced stones were less than the detection limit set by Japanese environmental standards. 3. Leaching values of hazardous heavy metals of produced stones sufficiently met the environmental standard on soil pollution of the Environment Agency with superior leaching behavior for the vitreous slag, thus confirming their safe applications. 4. The effective application of produced stones for aggregate was tested based on Japanese Industrial Standards and every figure of test results met the Japanese standard values. The use of produced stones as raw materials for permeable pavement blocks has been confirmed in commercial construction for a park in Chiba Prefecture. Asphalt use was also demonstrated by paving a commercial roadway in Kamagaya City.     

稻米和土壤中农美利残留量气相色谱分析方法的研究

建立了测定稻田土壤、稻米中农美利残留量的气相色谱分析方法。用配有NPD的气相色谱仪、DB-1301毛细管柱测定稻田土壤及稻米中农美利的残留量，最低检测浓度为0．01mg／kg、平均回收率为80．4％-99．8％，变异系数为6．3％-11．7％，均达到残留分析的要求。