建筑火灾区域模拟竖孔流动的计算

本文根据建筑火灾双层区域模拟思想，给出其常微分控制方程组，并分析了其压力求解方法，然后，运用伯努力利方程推导了相邻房间通过矩形竖孔（门或窗）的质量流率计算公式，还讨论了竖孔流动中性面产生条件。在此基础上，结合一两房间、两孔建筑中烟气运动实例，运用Ｃ．Ｗ．Ｇｅａｒ刚性稳定算法对火灾发展及烟气流动过程进行了数值模拟；给出各竖孔中性面位置、数量和各主环境之间通过竖孔的质量流率；还给出各房间气体平均温升、     

Accidents and risk control

A framework for transformation of knowledge and experience from risk analysis to emergency education is presented. An accident model was developed built on the concept “uncontrolled flow of energy (UFOE)”, where essential elements are the state, location and movement of the energy. A UFOE can be considered as the driving force of an accident, e.g. an explosion, a release of heavy gases. A domain model has been developed for representing emergencies occurring in society. A domain is a group of activities with allied goals and elements, and the domain model uses three main categories: status, context and objectives. Ten specific domains have been investigated including process plant, energy production and distribution, natural disasters and different sorts of transport. Totally 25 accident cases were consulted and information was extracted for filling into the schematic representations with two to four cases pr. specific domain.     

高层建筑楼梯间正压送风方式的浅析

本文对建筑防火设计中正压我系统的系统设计和送风方式进行了详尽的阐述。文章中列举了封闭楼梯间和防烟楼梯间的送风量计算方法，并针对目前两种主要送风方式，即点送风与竖井送风方式的特点，从理论上分析点风方式的应用前景。作者们还对北京西苑饭店主楼和北京新世纪饭店主楼等高层和超高层的大型建筑进行两种不同方式的楼梯间正压送风试验，进行了点式送风方式和竖井送风方式的对比试验，精确地测量了点式送风方式下的楼梯间正奔     

热混合层中温度脉动的分形特性

运用计盒维数方法对测量热混合层所得到的温度脉动时间系列信号进行了详细研究，对等温界面（ｉｓｏｔｈｅｒｍｉｎｔｅｒｆａｃｅ）截取时间点集合的分形维数Ｄ＝ｌｏｇ（Ｎ（ｒ））／ｌｏｇｒ在一定的尺度范围内进行了估算，界面阀值温度范围为Ｔ±１．５Ｔ′（Ｔ，Ｔ′为测量点的平均温度和脉动温度），发现对同一热混合层垂直面的不同测量点存在相同的Ｄ＝０．３５±０．０８     

喷射溶气回流浮选工艺处理含油废水

采用喷射溶气回流浮选工艺处理含油废水，替代原来的全加压溶气浮选工艺，提高了浮选过程的处理效果，增强了系统的抗负荷冲击能力，浮选出水油含量由原来的〈４０ｍｇ／Ｌ降至〈２０ｍｇ／Ｌ，ＣＯＤ由原来的〈１５０ｍｇ／Ｌ降至〈１１０ｍｇ／Ｌ。     

Thermal and mechanical properties of poly(lactic Acid) and poly(ethylene/butylene Succinate) blends

In this study, blends of poly (lactic acid) (PLA) with poly(ethylene/butylene succinate) (Bionolle) have been investigated for their thermal and mechanical properties as a function of the concentration of Bionolle. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and tensile tests were used to characterize the blends. From the results of the DMA and DSC, it was found that this blend system was not miscible within the compositions studied. DSC results showed that adding Bionolle aids in crystallization of PLA. It was observed that increasing the Bionolle concentration led to a slight increase in the strain-at-break of the blends but a decrease in the Young’s modulus and ultimate tensile strength. Biaxially oriented films showed an increase in tensile strength, modulus, and strain-at-break.     

地质勘探巷道的通风新方法探讨

探讨了巷道通风的新方法，其中包括用间断风筒的通风、半循环通风、封闭式通风、高压通风机通风等，并就通风研究的发展方向提出了几点建议     

事故树定量分析与安全指标的数学模型的建立

阐述了在该课题研究过程中，提出的一些新概念、新定义和新方法     

提高标准化工作有效性促进企业创造更大效益

10月14日是世界标准日。为此，ISO、IEC和ITU三大国际标准化组织的主席每年都联合发表祝词，2006年的祝词为“标准：为小企业创造大效益”。这个主题充分反映了标准化工作在提高产品质量、提高企业的核心竞争力。促进产业发展，促进国际贸易中的作用。     

Characteristics of large cooking oil pool fires and their extinguishment by water mist

Large cooking oil pool fires, occurring in industrial oil cookers, present a severe hazard to food processing plants due to their size and the large amount of hot oil involved. This paper reports a series of full-scale fire experiments conducted in a large industrial oil cooker mock-up. The characteristics of large cooking oil pool fires and the effect of oil depth and hood position in the oil cooker on fire growth were studied. The use of water mist for extinguishing large oil pool fires and their extinguishing performance under different discharge pressure and with different types of water mist systems were investigated. Experimental results showed that the cooking oil underwent a substantial expansion in volume during heating. The fires developed quickly once the oil auto-ignited. The fire growth rate was affected by the oil depth in the pan and the hood position in the oil cooker. The water mist fire suppression systems effectively extinguished large cooking oil fires and prevented them from re-igniting. Their extinguishing performance was determined by the type of water mist system, discharge pressure and hood position in the oil cooker.