Cytotoxicity and genotoxicity of Guaribas river water (Piauí, Brazil), influenced by anthropogenic action

In general, tropical rivers have a great impact on human activities. Bioaccumulation of toxins is a worldwide problem nowadays and has been, historically, overlooked by the supervisory authorities. This study evaluated cytogenotoxic effects of Guaribas river (a Brazilian river) water during dry and rainy seasons of 2014 by using the Allium cepa test system. The toxicogenetic variables, including root growth, mitotic index, and chromosomal aberrations, were analyzed in meristematic cells of A. cepa exposed to water samples taken from the up-, within, and downstream of the city Picos (state: Piauí). The physical-chemical parameters were also analyzed to explain water quality and possible anthropogenic action. Additionally, the presence of heavy metals was also analyzed to explain water quality and possible damaging effects on eukaryotic cells. The results suggest that the river water exerted cytotoxic, mutagenic, and genotoxic effects, regardless of the seasons. In addition, Guaribas river presented physico-chemical values outside the Brazilian laws, which can be a characteristic of human pollution (domestic sewage, industrial, and local agriculture). The genetic damage was positively correlated with higher levels of heavy metals. The pollution of the Guaribas river water may link to the chemical contamination, including the action of heavy metals and their impacts on genetic instability in the aquatic ecosystem. In conclusion, necessary steps should be taken into account for further toxicogenetic studies of the Guaribas river water, as it has an influence in human health of the same region of Brazil.     

Cytotoxic and genotoxic effects of silver nanoparticle/carboxymethyl cellulose on <Emphasis Type="Italic">Allium cepa</Emphasis>

Several mutagenic agents may be present in substances released in the environment, which may cause serious environmental impacts. Among these substances, there is a special concern regarding the widespread use of silver nanoparticles (AgNP) in several products due to their widely known bactericidal properties, including in the medical field and the food industry (e.g., active packaging). The assessment of the effects of AgNP released in the environment, having different concentrations, sizes, and being associated or not to other types of materials, including polymers, is therefore essential. In this research, the objective was to evaluate the genotoxic and cytotoxic effects of AgNP (size range between 2 and 8 nm) on root meristematic cells of Allium cepa (A. cepa). Tests were carried out in the presence of colloidal solution of AgNP and AgNP mixed with carboxymethylcellulose (CMC), using distinct concentrations of AgNP. As a result, when compared to control samples, AgNP induced a mitotic index decrease and an increase of chromosomal aberration number for two studied concentrations. When AgNP was in the presence of CMC, no cytotoxic potential was verified, but only the genotoxic potential for AgNP dispersion having concentration of 12.4 ppm.     

Activity of the endophytic fungi <Emphasis Type="Italic">Phlebia</Emphasis> sp. and <Emphasis Type="Italic">Paecilomyces formosus</Emphasis> in decolourisation and the reduction of reactive dyes’ cytotoxicity in fish erythrocytes

The current study investigates the potential for discolouration and degradation of Reactive Blue 19 and Reactive Black 5 textile dyes by endophytic fungi Phlebia sp. and Paecilomyces formosus as well as the potential cytotoxicity of products or by-products generated by the treatments in fish erythrocytes. It was observed at 30 days that both endophytes showed biodegradation activity with 0.1 g mL^?1 of dyes. P. formosus showed highest extracellular and intracellular protein content levels after the 15th day, and Phlebia sp. stands out for production of extracellular laccase, indicating that this enzyme may be associated with the decolouration capacity. The dyes showed toxic effects in fishes at 0.01 g mL^?1 concentration, resulting in the appearance of micronuclei in erythrocyte cells. When degraded dyes treated by endophytes were tested, the frequency of micronuclei reduced approximately 20%, indicating the effectiveness of these endophytic in the treatment of textile dyes with less environmental impact, thus indicating a potential for application of these fungi in bioremediation process.     

Chemical and bioanalytical characterisation of PAHs in risk assessment of remediated PAH-contaminated soils

Polycyclic aromatic hydrocarbons (PAHs) are common contaminants in soil at former industrial areas; and in Sweden, some of the most contaminated sites are being remediated. Generic guideline values for soil use after so-called successful remediation actions of PAH-contaminated soil are based on the 16 EPA priority pollutants, which only constitute a small part of the complex cocktail of toxicants in many contaminated soils. The aim of the study was to elucidate if the actual toxicological risks of soil samples from successful remediation projects could be reflected by chemical determination of these PAHs. We compared chemical analysis (GC-MS) and bioassay analysis (H4IIE-luc) of a number of remediated PAH-contaminated soils. The H4IIE-luc bioassay is an aryl hydrocarbon (Ah) receptor-based assay that detects compounds that activate the Ah receptor, one important mechanism for PAH toxicity. Comparison of the results showed that the bioassay-determined toxicity in the remediated soil samples could only be explained to a minor extent by the concentrations of the 16 priority PAHs. The current risk assessment method for PAH-contaminated soil in use in Sweden along with other countries, based on chemical analysis of selected PAHs, is missing toxicologically relevant PAHs and other similar substances. It is therefore reasonable to include bioassays in risk assessment and in the classification of remediated PAH-contaminated soils. This could minimise environmental and human health risks and enable greater safety in subsequent reuse of remediated soils.     

Modeling of Dry Injection Flue Gas Desulfurization

Dry processes for controlling sulfur dioxide emissions by injecting sodium based sorbents in the ductwork ahead of a bag filter are effective and more simple alternatives to conventional FGD processes. This paper presents a fundamental kinetic model of the dry injection process. Experimental data from pilot scale tests are reported. The model is shown to be applicable to the dry injection process. However, further experimental work is recommended to get a better understanding of the reaction mechanisms.     

Use of a Continuous Nephelometer to Measure Personal Exposure to Particles During the U.S. Environmental Protection Agency Baltimore and Fresno Panel Studies

ABSTRACT

In population exposure studies, personal exposure to PM is typically measured as a 12- to 24-hr integrated mass concentration. To better understand short-term variation in personal PM exposure, continuous (1-min averaging time) nephelometers were worn by 15 participants as part of two U.S. Environmental Protection Agency (EPA) longitudinal PM exposure studies conducted in Baltimore County, MD, and Fresno, CA. Participants also wore iner-tial impactor samplers (24-hr integrated filter samples) and recorded their daily activities in 15-min intervals. In Baltimore, the nephelometers correlated well (R² = 0.66) with the PM₂₅ impactors. Time-series plots of personal nephelometer data showed each participant's PM exposure to consist of a series of peaks of relatively short duration. Activities corresponding to a significant instrument response included cooking, outdoor activities, transportation, laundry, cleaning, shopping, gardening, moving between microenvironments, and removing/putting on the instrument. On average, 63-66% of the daily PM exposure occurred indoors at home (about 2/3 of which occurred during waking hours), primarily due to the large amount of time spent in that location (an average of 7277%). Although not a reference method for measuring mass concentration, the nephelometer did help identify PM sources and the relative contribution of those sources to an individual's personal exposure.     

The Influence of Human Activity Patterns on Personal PM Exposure: A Comparative Analysis of Filter-Based and Continuous Particle Measurements

ABSTRACT

Particulate matter (PM) exposure data from the U.S. Environmental Protection Agency (EPA)-sponsored 1998 Baltimore and 1999 Fresno PM exposure studies were analyzed to identify important microenvironments and activities that may lead to increased particle exposure for select elderly (>65 years old) subjects. Integrated 24-hr filter-based PM_2.5 or PM₁₀ mass measurements [using Personal Environmental Monitors(PEMs)] included personal measurements, indoor and outdoor residential measurements, and measurements at a central indoor site and a community monitoring site. A subset of the participants in each study wore passive nephelometers that continuously measured (1-min averaging time) particles ranging in size from 0.1 to ~10 um. Significant activities and locations were identified by a statistical mixed model (p < 0.01) for each study population based on the measured PM_2.5 or PM₁₀ mass and time activity data. Elevated PM concentrations were associated with traveling (car or bus), commercial locations (store, office, mall, etc.), restaurants, and working.

The modeled results were compared to continuous PM concentrations determined by the nephelometers while participants were in these locations. Overall, the nephelometer data agreed within 6% of the modeled PM_2.5 results for the Baltimore participants and within ~20% for the Fresno participants (variability was due to zero drift associated with the nephelometer). The nephelom-eter did not agree as well with the PM₁₀ mass measurements, most likely because the nephelometer optimally responds to fine particles (0.3–2 um). Approximately one-half (54 ± 31%; mean ± standard deviation from both studies) of the average daily PM_2.5 exposure occurred inside residences, where the participants spent an average of 83 ± 10% of their time. These data also showed that a significant portion of PM_2.5 exposure occurred in locations where participants spent only 4–13% of their time.     

Biodegradation of the herbicide glyphosate by filamentous fungi in platform shaker and batch bioreactor

The biodegradation conducted by microorganisms on herbicide glyphosate (N-phosphonomethylglycine) was investigated. Five strains of filamentous fungi belonging to the Fusarium genre were grown on Czapeck medium without phosphorous and supplemented with the addition of glyphosate. The assays were conducted to determine the ability of use as a phosphorous source, the inhibition caused by presence of herbicide, and the biodegradation in shaker and bioreactor by Fusarium strains. It was observed that the herbicide did not show any negative effect on microrganisms by quantity of the biomass. Among the strains tested, no inhibition was noted by the addition of glyphosate even at a high concentration. All strains studied were able to biodegrade it and use the herbicide as a phosphorous source. The formation of consortium was not better than the strains tested in pure culture. The biodegradation in the bioreactor was better than in the shaker. However, there wasn't any influence on biodegradation rate by changing the amount of oxygen in the system.     

Determination of pharmaceuticals, personal care products, and pesticides in surface and treated waters: method development and survey

Water is fundamental to the existence of life since it is essential to a series of activities, such as agriculture, power generation, and public and industrial supplies. The residual water generated by these activities is released into the environment, reaches the water systems, and becomes a potential risk to nontarget organisms. This paper reports the development and validation of a quantitative method, based on solid-phase extraction and liquid chromatography tandem mass spectrometry, for the simultaneous analysis of 18 pharmaceuticals and personal care products (PPCPs) and 33 pesticides in surface and drinking waters. The accuracy of the method was determined by calculating the recoveries, which ranged from 70 to 120 % for most pesticides and PPCPs, whereas limits of quantification ranged from 0.8 to 40 ng/L. After the validation step, the method was applied to drinking and surface waters. Pesticides and PPCPs were found in concentrations lower than 135.5 ng/L. The evaluation of different water sources with regard to contamination by pesticides and PPCPs has been quite poor in southern Brazil.