Land Management Versus Natural Factors in Land Instability: Some Examples in Northern Spain

The objective of this work is to test a hypothesis formulated on the basis of former results which considers that there might be a “global geomorphic change,” due to activities related to land management and not determined by climate change, which could be causing an acceleration of geomorphic processes. Possible relationships between some geomorphic processes related to land instability (landslides or sediment generation) and potential triggering factors are analyzed in study areas in northern Spain. The analysis is based on landslide inventories covering different periods, as well as the determination of sedimentation rates. Temporal landslide and sedimentation rate trends are compared with different indicators of human activities (land-use change, logging, forest fires) and with potential natural triggers (rainfall, seismicity). The possible influence of the road network in the distribution of landslides is also analyzed. Results obtained show that there is a general increase of both landslide and sedimentation rates with time that cannot be explained satisfactorily by observed rainfall trends and even less by seismicity. Land-use change appears to be by far the main factor leading to land instability, with some changes producing up to a 12-fold increase of landslide rate. A relationship between road network and the spatial distribution of landslides has also been observed. These results do confirm the existence of an acceleration of geomorphic processes in the region, and also suggest that climate-related factors play a limited role in the changes observed.     

Glass-ceramics obtained by the recycling of end of life cathode ray tubes glasses

This work is concerned with open-loop recycling of end of life Cathode Ray Tubes glass (an unsolved problem when considering that in Europe almost 90% of EOL electronic goods is disposed of in landfills), focusing on the development of glass-ceramics from panel or funnel glass with dolomite and alumina, and the evaluation of the tendency towards crystallisation with particular attention on composition and thermal treatment. Glasses were melted at a temperature of about 1500 degrees C and transformed into glass-ceramics by different thermal treatments (900 degrees C to approximately 1100 degrees C temperature range and 0.5 to approximately 8h soaking time). By using the evaluation of thermal, mineralogical and microstructural data it has been pointed out that a good degree of crystallisation is reached at about 1000 degrees C and with a high proportion of waste glass (50-75%) if 40-45% of CaO and MgO bearer (dolomite) is introduced. In this way alkaline and alkaline-earth silicate and aluminosilicate mainly develop probably with a surface mechanism.     

Estimation of ambient chronic toxicity in a polluted creek system

Ambient water toxicity estimations were conducted in Piles Creek as part of an ecological risk assessment study. This creek is part of a highly polluted estuarine system located near Linden, New Jersey. An upstream and a downstream site in the creek were evaluated for effects on survival, growth and sexual maturity of the estuarine mysid, Mysidopsis bahia. Manasquan Inlet, Manasquan, New Jersey, served as the reference site. Seven-day screening toxicity tests were conducted once a month over a three month period. Results indicate that survival of mysids was not affected in any toxicity test. Mysid growth was significantly reduced at both of the test sites, in two out of three trials. Sexual maturity was shown to be adversely affected in mysids exposed to ambient waters from both test sites throughout the duration of the study.     

A new environmentally friendly process for the recovery of gold from electronic waste

A new method for the recovery of precious metals, in particular gold, from electronic waste is proposed. This work focused on the research of an easily renewable etching agent, in order to make an environmentally friendly process possible. Two well known hydrometallurgical etching agents, FeCl₃ and CuCl₂, were evaluated in terms of efficiency and kinetics, testing solutions with different concentration of etchant and hydrochloric acid. The recovery of spent etching solutions was evaluated: promising results were found in the case of CuCl₂, which can be completely restored by oxidation of the cuprous chloride formed during the etching using atmospheric oxygen.     

Fate of β-blockers in aquifer material under nitrate reducing conditions: Batch experiments

The fate of the three environmentally relevant β-blockers atenolol, metoprolol and propranolol has been studied in batch experiments involving aquifer material and nitrate reducing conditions. Results from the about 90 d long tests indicate that abiotic processes, most likely sorption, jointly with biotransformation to atenololic acid were responsible for the 65% overall removal observed for atenolol. Zero order kinetics, typical of enzyme-limited reactions, controlled the transformation of this beta blocker to its corresponding carboxylic acid. The mass balance evidences that no mineralization of atenolol occurs in the biotic experiment and that atenololic acid is more stable than its parent compound under the studied conditions. This finding stresses the importance of considering atenololic acid as target compound in the environmental studies on the fate of atenolol. For metoprolol and propranolol the results from the experiment suggest a slower sorption to be the dominant removal process, which led to final decreases in concentrations of 25-30% and 40-45%, respectively. Overall, the removals observed in the experiments suggest that subsurface processes potentially constitute an alternative water treatment for the target beta-blockers, when compared to the removals reported for conventional wastewater treatment plants.     

The use of oxygen consumption and ammonium excretion to evaluate the toxicity of cadmium on Farfantepenaeus paulensis with respect to salinity

The main purpose of the present study was to detect the acute toxicity of cadmium (Cd) in F. paulensis and to investigate its effect on oxygen consumption and ammonium excretion different salinities. First, we examined the acute toxicity of Cd in F. paulensis at 24, 48, 72, and 96-h lethal concentration (LC50). Cd was significantly more toxic at 5 salinity than at 20 and 36. The oxygen consumption and ammonium excretion were estimated through experiments performed on each of the twelve possible combinations of three salinities (36, 20 and 5), at temperature 20 °C. Cd showed a reduction in oxygen consumption at 5 salinity, the results show that the oxygen consumption decreases with respect to the Cd concentration. At the highest Cd concentration employed (2 mg L⁻¹), the salinity 5 and the temperature at 20 °C, oxygen consumption decreases 53.7% in relation to the control. In addition, after separate exposure to Cd, elevation in ammonium excretion was obtained, wish were 72%, 65% and 95% higher than the control, respectively. The results show that Cd is more toxic to F. paulensis at lower salinities.     

Release of agronomical nutrient from zeolitite substrate containing phosphatic waste

The principal plant nutrients are phosphorous, nitrogen and potassium. Among these compounds, phosphorous is the most critical: it reacts rapidly, becoming an insoluble compound. The combination of zeolitites with phosphate materials (zeoponic substrate) agrees to a gradual and controlled phosphorous release in soils: phosphorous for plant uptake is released by the combination of dissolution and ion-exchange reactions. Animal bone ashes, rich in phosphorous and leached alone, release little amounts of soluble phosphorous and a great deal of alkaline sodium and potassium. Concerning chabazitic-zeolitite, it encourages a both gradual and growing soluble phosphorous release from animal bone ashes, in accordance with clinoptilolitic- and phillipsitic-zeolitite abilities; in particular, that release increases, thanks to both a higher zeolitite/bone ash ratio and ammonium enrichment of zeolitite. The use of zeolitite is environmentally sustainable in Italy because large amounts of deposits of zeolitite were present in Italy.     

A rapid and sensitive method for methyl tert-butyl ether analysis in water samples by use of solid phase microextraction and gas chromatography-mass spectrometry

This work describes a rapid and sensitive solid-phase microextraction (SPME) method for the isolation and analysis of methyl tert-butyl ether in water samples. Methyl tert-butyl ether was extracted from aqueous solutions using SPME fibre coated with Divinylbenzene/Carboxen/polydimethylsiloxane (30 microm film thickness) and analysed by GC-MS with a Hewlett Packard 6890/5973 system equipped with a capillary column coated with Vocol (30 m x 0.25 mm, 1.5 microm film thickness). Extraction parameters and chromatographic separation conditions were optimised. The developed method showed good analytical performance in terms of precision (RSD between 2% and 8%) and accuracy (mean recovery from 96% to 104%) with a detection limit of 14 ppt. Finally the method was applied to surface, tap and commercial mineral water samples, as well as snow samples collected along a busy road of Bologna town area. The median concentration of methyl tert-butyl ether in all these samples (0.05-0.4 ppb) was well below the maximum aqueous contamination levels in water adopted in the United States (13 ppb).     

Alkali activation processes for incinerator residues management

Incinerator bottom ash (BA) is produced in large amount worldwide and in Italy, where 5.1 millions tons of municipal solid residues have been incinerated in 2010, corresponding to 1.2–1.5 millions tons of produced bottom ash. This residue has been used in the present study for producing dense geopolymers containing high percentage (50–70 wt%) of ash. The amount of potentially reactive aluminosilicate fraction in the ash has been determined by means of test in NaOH. The final properties of geopolymers prepared with or without taking into account this reactive fraction have been compared. The results showed that due to the presence of both amorphous and crystalline fractions with a different degree of reactivity, the incinerator BA geopolymers exhibit significant differences in terms of Si/Al ratio and microstructure when reactive fraction is considered.