Mathematical modeling and computer simulation of radioactive and toxic chemical species dispersion in porous media in the vacinity of uranium recovery operations

The management of uranium recovery operations, such as mill production, tailings, heep leaching or solution mining (in-situ mining), has been one of the most challenging issues facing environmental engineers and scientists in the last decade. Almost any activity (mill production, evaporative and holding ponds, storage sites of chemicals, tailings ponds and transportation) results in radioactive and toxic chemicals contamination of surface and groundwaters. Current estimates based on observations of plant operations indicate that 70–80% of the water used in mill production is lost by seepage and 10–20% by evaporation. This large quantity of seepage raises serious questions as to the degree of migration of radioactive and potentially toxic chemical species from the tailings pond and their impact on the surrounding surface and subsurface environments.This paper discusses the major radioactive and toxic chemicals involved in the uranium recovery operations and presents computer simulation results of their hydrodynamic dispersion, migration and prediction of future material movements.     

Trace metals used as natural markers for discriminating some karstic freshwaters near Trieste (Italy)

Some heavy metals have been determined using voltammetry in freshwaters forming part of a karstic hydrological system (the Timavo River, north of Trieste), during attempts to characterize and discriminate the different sources of the springs. The trace elements can be considered natural markers, with lead appearing to be the most discriminating variable. Non parametric statistics and cluster analysis were used to estimate the significance of the determined parameters with respect to the considered ecosystem.     

Biosemiotics: a new understanding of life

Biosemiotics is the idea that life is based on semiosis, i.e., on signs and codes. This idea has been strongly suggested by the discovery of the genetic code, but so far it has made little impact in the scientific world and is largely regarded as a philosophy rather than a science. The main reason for this is that modern biology assumes that signs and meanings do not exist at the molecular level, and that the genetic code was not followed by any other organic code for almost four billion years, which implies that it was an utterly isolated exception in the history of life. These ideas have effectively ruled out the existence of semiosis in the organic world, and yet there are experimental facts against all of them. If we look at the evidence of life without the preconditions of the present paradigm, we discover that semiosis is there, in every single cell, and that it has been there since the very beginning. This is what biosemiotics is really about. It is not a philosophy. It is a new scientific paradigm that is rigorously based on experimental facts. Biosemiotics claims that the genetic code (1) is a real code and (2) has been the first of a long series of organic codes that have shaped the history of life on our planet. The reality of the genetic code and the existence of other organic codes imply that life is based on two fundamental processes--copying and coding--and this in turn implies that evolution took place by two distinct mechanisms, i.e., by natural selection (based on copying) and by natural conventions (based on coding). It also implies that the copying of genes works on individual molecules, whereas the coding of proteins operates on collections of molecules, which means that different mechanisms of evolution exist at different levels of organization. This review intends to underline the scientific nature of biosemiotics, and to this purpose, it aims to prove (1) that the cell is a real semiotic system, (2) that the genetic code is a real code, (3) that evolution took place by natural selection and by natural conventions, and (4) that it was natural conventions, i.e., organic codes, that gave origin to the great novelties of macroevolution. Biological semiosis, in other words, is a scientific reality because the codes of life are experimental realities. The time has come, therefore, to acknowledge this fact of life, even if that means abandoning the present theoretical framework in favor of a more general one where biology and semiotics finally come together and become biosemiotics.     

Thermo-chemical extraction of fuel oil from waste lubricating grease

This study investigated the recovery of oil from waste grease through the process of thermal degradation in an aqueous solution of potassium hydroxide (KOH) followed by solvent extraction. Waste high temperature metal bearing grease was dissolved in a 15 w/w% KOH solution at 80 °C while being agitated at 2000 rpm using a shear action agitator for a period of 15 min. Two distinct layers were observed after 8 min of settling time. The top layer being of dark brown oil and the bottom layer was a heterogeneous mixture. The two layers were separated by decantation. The bottom layer was cooled down to 45 °C followed by slow addition of toluene (C₇H₈) while agitating at 1200 rpm for 15 min to prevent solids settling and minimise rapid volatilisation of the organic compounds in the mixture. Two distinct layers were also formed, the top homogeneous mixture of light brown oil–toluene mixture and the bottom sludge layer. The solvent was recovered from the oil for re-use by fractional distillation of the homogenous mixture. It was observed that 15 w/w% potassium hydroxide solution can chemically degrade the soap matrix in the grease and extract up to 49 w/w% of the fuel oil when subjected to high shear stress at a temperature of 80 °C. The 26 w/w% extraction of oil in the remaining sludge was obtained by solvent extraction process with mass ratios of sludge to solvent of 2:1. Solvent recovery of 88% by mass was obtained via fractional distillation method. The combined extraction processes brought an overall oil yield of 75 w/w% from the waste grease. The fuel oil obtained from this process has similar properties to paraffin oil and can be blended with other oils as an alternative energy source.     

Management of agricultural biomass wastes: Preliminary study on characterization and valorisation in clay matrix bricks

In this work the feasibility of using woody agricultural biomass wastes as grapes and cherries seeds, sawdust, as pore forming agent, and sugar cane ash, as silica precursor, in bricks, were reported.Sawdust and grapes and cherries seeds, thanks to their organic substances content, during their combustion, bring an energetic support in the bricks firing phase and act as pore forming agent. Usually the addition of this kind of waste is limited to 10 wt.% in order to reach an equilibrium between positive (weight and shrinkage decrease and porosity increase) and negative (increase of water absorption and mechanical resistance decrease) effects. The results show that grapes and cherries seeds, added in a percentage of 5 wt.% to a brick formulation, have better influence with respect to the sawdust, maintaining the mechanical properties of the fired brick (950 °C), showing modulus of rupture around 21–23 MPa with a weight reduction of 3–10% (respect to the standard one). Regarding the sugar cane ash, the addition of 5 wt.% improves the mechanical properties (modulus of rupture around 27 MPa) and no weight decrease is observed. These results confirmed the role played by this kind of agricultural waste, which thanks to its high silica content (61 wt.%) is capable to demonstrate a filler and plasticity reducing effect on the brick bodies. Tests carried out highlighted that the addition of these by-products (5 wt.%) do not change negatively the main technological properties measured (water absorption, linear shrinkage, flexural resistance, etc.) and permit to hypothesize their use to obtain bricks with both insulating and higher mechanical properties using a pore agent forming or silica carrier alternative raw materials, respectively.     

Use of municipal incinerator bottom ash as sintering promoter in industrial ceramics

The use of glassy frits obtained from municipal incinerator bottom ash and glass cullet, as sintering promoters in the production process of porcelainized stoneware, was investigated. The emphasis was on studying the similarities and differences with respect to the standard body. The characterization involved the application of several techniques: chemical analysis, X-ray powder diffraction, linear shrinkage during firing, water absorption, bending strength and spot resistance test. The results show that, the addition of these glassy frits in the body improve the characteristics of water absorption and spot resistance which is related to the absence of surface porosity originated by the glassy phase. Moreover, addition of glassy frits to the porcelanized stoneware body does not change significantly its bending strength. In the firing conditions used there is a slight worsening in the tiles planarity, while there is a significant modification of the color, which becomes darker with respect to the base body.     

The use of active metabolism and swimming activity to evaluate the toxicity of dodecyl benzene sodium sulfonate (LAS-C12) on the Mugil platanus (Mullet) according to temperature and salinity.

Active metabolism and swimming activity were used to study the effects of dodecyl benzene sodium sulfonate (LAS-C12) in Mugil platanus, a species traditionally considered as estuarine. The effects of exposure to different concentrations of LAS-C12 (0.0, 1.0, 2.5, and 5.0 mg/L) on the active metabolism and swimming activity of Mugil platanus were evaluated. The active metabolism and swimming activity were estimated through experiments conducted on each of 9 possible combinations of three temperatures (35, 20, and 15 degrees C) and three salinities (35, 20, and 5 per thousand). The results show that the active metabolism increases according to the LAS-C12 concentration in all temperatures and salinities studied. At the highest tested concentration (5.0 mg/L), the active metabolism was 111%; 84.8 and 105% higher than the control, at 35 per thousand salinity at the three temperatures. However, the swimming activity decreased according to the LAS-C12 concentration in all temperatures and salinities studied. At the highest tested concentration, the swimming activity was 78.6, 73.6, and 78.7% less than the control, at 25 degrees C at the three salinities. The active metabolism and swimming activity averages, achieved in the different salinities studied, were not significantly different, as a result of the LAS-C12 concentration.     

Optimal Experimental Conditions for Improving the Yield of Poly(limonene) from Photoinduced Polymerization

Journal of Polymers and the Environment - Limonene represents a possible candidate for the synthesis of polymers from renewable sources. However, because of some structural characteristics, the...     

An improved index for monitoring metal pollutants in surface sediments

An approach for defining the quality of surface sediments of limited areas in terms of heavy metal contents is proposed. Sediments were taken on a bi‐dimensional mapping, for checking possible different sources of pollution in the case study, a harbour zone. Non residual metals were determined by ICP‐AES in cold diluted hydrochloric acid leachates of sediments. An “enrichment factor”;, r, can be computed for each metal: metals with r values exceeding unity can be considered as indicators of metal pollution. A “total enrichment factor”;, R, was proposed in order to assess the degree of pollution of sediments for each site. R is an adimensional value that accounts for the presence of metals that exceed threshold values determined by background concentrations.     

Study of the operational conditions for anaerobic digestion of urban solid wastes

This paper describes an experimental evaluation of anaerobic digestion technology as an option for the management of organic solid waste in developing countries. As raw material, a real and heterogeneous organic waste from urban solid wastes was used. In the first experimental phase, seed selection was achieved through an evaluation of three different anaerobic sludges coming from wastewater treatment plants. The methanization potential of these sludges was assessed in three different batch digesters of 500 mL, at two temperature levels. The results showed that by increasing the temperature to 15 degrees C above room temperature, the methane production increases to three times. So, the best results were obtained in the digester fed with a mixed sludge, working at mesophilic conditions (38-40 degrees C). Then, this selected seed was used at the next experimental phase, testing at different digestion times (DT) of 25, 20 and 18 days in a bigger batch digester of 20 L with a reaction volume of 13 L. The conversion rates were registered at the lowest DT (18 days), reaching 44.9 L/kg(-1) of wet wasteday(-1). Moreover, DT also has a strong influence over COD removal, because there is a direct relationship between solids removal inside the reactor and DT.