Dietary PBDE intake: a market-basket study in Belgium

A food market-basket, representative for the general Belgian population, containing various meat, fish and dairy food products, was assembled and analysed for its polybrominated diphenyl ether (PBDE) content. Additionally, fast food samples were also investigated. Based on the measured PBDE levels, an average daily dietary intake estimate of PBDEs was calculated. Of all foods analysed, fish had the highest average sum of PBDE levels (BDEs 28, 47, 99, 100, 153, 154, and 183; 460 pg/g ww), followed by dairy products and eggs (260 pg/g ww), fast food (86 pg/g ww) and meat products (70 pg/g ww). One fresh salmon filet had the highest total concentration of PBDEs (2360 pg/g ww), whereas levels in steak and chicken breast were the lowest of all foods analysed. BDE 209 was never found above LOQ in any food. PBDE intake calculations were based on the average daily food consumption in Belgium and were estimated between 23 and 48 ng/day of total PBDEs (lower and upper bound). This value is in accordance with what was previously reported for diets from geographical distinct areas, such as Canada, Finland, Spain, Sweden and the UK. Although it is only a minor constituent of the Belgian diet, fish is the major contributor to the total daily PBDE-intake (around 40%) due to the high PBDE levels in this type of food. Although low contaminated, meat products account for around 30% of the total dietary intake of PBDEs. Dairy products and eggs contribute to a lesser degree (less than 30%).     

Evaluation of cleaning and disinfection protocols for commercial farm equipment following a foreign animal disease outbreak

This study evaluated the microbiocidal efficacy of a cleaning and disinfection (C&D) treatment using stainless-steel coupons applied to three common types of animal mortality transport vehicles when exposed to agricultural conditions. Metal test coupons, inoculated with bacteriophage MS2, were affixed to the undercarriage of three types of animal mortality transport vehicles at various locations. Coupons were grimed by maneuvering the test vehicles down a series of wet dirt roads. Coupons were attached and extracted at various points to evaluate C&D performance with and without grime. C&D efficacy using a water-supplied pressure washing system and a dilute sodium hypochlorite (NaOCl) solution was determined by comparing the difference in recovered viable virus between positive control coupons and test coupons. The results demonstrated a relatively high surface decontamination efficacy, with all but one location showing >5 log reduction of MS2. Coupons located on the roll-off truck's inside-back bumper contained the highest level of grime and resulted in a 4 log reduction of MS2. There was no significant difference in C&D efficacy across vehicle types, but locations impacted by grime and lack of accessibility achieved lower efficacies on average. These findings suggest that common C&D protocols, when applied to farm mortality transport vehicles, are effective. Hard-to-access locations containing high levels of grime may be candidates for additional targeted treatment.     

A novel sigma coordinate system to simulate abrupt changes of underwater terrain in a hydrodynamic model: application to Lake Mead,USA

The sigma (SIG) coordinate system in ocean circulation simulation models results inevitably in horizontal pressure gradient error. This problem also emerges in models of deep lakes or reservoirs with the same characteristics of underwater terrain mutation. SIG coordinates reflect vertical relative stratification but cannot be used to calculate horizontal pressure gradient force in places with drastic topographic changes; this results in vertical water temperature and circulation errors. In deep lakes or reservoirs, differences in water density caused by the temperature difference between upper and lower water bodies is the primary cause of thermal stratification phenomena. Lake Mead was used as a case study on steep topography based on Environmental Fluid Dynamics Code (EFDC) model in this study. SIG coordinates result in close agreement between the calibrated temperature time series at the top and middle water layers, but disparity in the bottom water layer. The error emerges in the horizontal pressure gradient error due to the SIG coordinate transformation. Neither increasing the vertical resolution nor adjusting the horizontal viscosity coefficient resolve this error. We test the sigma-zed (SGZ) coordinate which combines Z coordinate and SIG coordinate as a replacement for the SIG coordinate to find that they effectively reduce the model’s runtime and simulation efficiency. The vertical temperature distribution in SGZ coordinate mode is more accurate than the distribution in SIG coordinate mode. The Navier-Stokes horizontal gradient and advection diffusion equation results under SIG coordinates are very sensitive to the pressure gradient. The replacement also enhances resolution near the thermocline, facilitates reclosing of the water bottom and the equal sigma surface, lends significant advantages in terms of vertical temperature in the simulation for local deep water with steep terrain, and shortens runtime for 0.14 h. SGZ mixed coordinates are recommended in the simulation of deep lakes or reservoirs wherein the underwater topography is large (with abundant continuous deep trenches or reefs).

     

Geographic Variability in Radon Exhalation at a Rehabilitated Uranium Mine in the Northern Territory, Australia

In this study, dry season radon flux densities and radon fluxes have been determined at the rehabilitated Nabarlek uranium mine in northern Australia using conventional charcoal canisters. Environmental background levels amounted to 31± 15 milli Becquerel per m² per second (mBq m⁻² s⁻¹). Radon flux densities within the fenced rehabilitated mine area showed large variations with a maximum of 6500 mBq m⁻² s⁻¹ at an area south of the former pit characterised by a disequilibrium between ²²⁶Ra and ²³⁸U. Radon flux densities were also high above the areas of the former pit (mean 971 mBq m⁻² s⁻¹) and waste rock dump (mean 335 mBq m⁻² s⁻¹). The lower limit for the total pre-mining radon flux from the fenced area (140 ha) was estimated to 214 kBq s⁻¹, post-mining radon flux amounted to 174 kBq s⁻¹.Our study highlights that the results of radon flux studies are vitally dependant on the selection of individual survey points. We suggest the use of a randomised system for both the selection of survey points and the placement of charcoal canisters at each survey point, to avoid over estimation of radon flux densities. It is also important to emphasize the significance of having reliable pre-mining radiological data available to assess the success of rehabilitation of a uranium mine site.2006 Springer. The Australian Government's right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged.     

Catchment-Wide Wetland Assessment and Prioritization Using the Multi-Criteria Decision-Making Method TOPSIS

It is widely accepted that wetland ecosystems are under threat worldwide. Many communities are now trying to establish wetland rehabilitation programs, but are confounded by a lack of objective information on wetland condition or significance. In this study, a multi-criteria decision-making method, TOPSIS (the Technique for Order Preference by Similarity to Ideal Solution), was adapted to assist in the role of assessing wetland condition and rehabilitation priority in the Clarence River Catchment (New South Wales, Australia). Using 13 GIS data layers that described wetland character, wetland protection, and wetland threats, the wetlands were ranked in terms of condition. Through manipulation of the original model, the wetlands were prioritized for rehabilitation. The method offered a screening tool for the managers in choosing potential candidate wetlands for rehabilitation in a region.     

Estimates of residual dairy manure nitrogen availability using various techniques

It is common practice to repeatedly apply dairy manure to the same fields. To accurately assess the total plant availability of manure nutrients, it is necessary to account for the nutrients remaining in soil from previous manure applications. A field experiment studying manure nitrogen (N) uptake by corn (Zea mays L.) was conducted from 1998 to 2003 on a Plano silt loam (fine-silty, mixed, mesic, Typic Argiudolls). Plots received two rates of semisolid manure either every year, every 2 yr, or every 3 yr to estimate first-, second-, and third-year dairy manure N residuals. Residual manure N availability was estimated from single and multiple manure applications using (i) the fertilizer N equivalence method, (ii) the apparent recovery (difference) method, (iii) relative effectiveness method, and (iv) recovery of (15)N-labeled manure. Second-year availabilities after a single manure application using the fertilizer equivalence, difference, and relative effectiveness methods were estimated to be 12, 8, and 4% of total manure N applications, respectively. Estimates of third-year availability by these methods were 3, 1, and 5%, respectively. Measurement of (15)N recovered from labeled manure was 6 and 2% in the second and third year, respectively. Fertilizer equivalence, difference, and relative effectiveness methods showed great year to year variability, reducing the confidence in the residual manure N availability estimates by these methods, but using (15)N-labeled manures reduced variability substantially. Based on this and other studies, we suggest that second- and third-year residual N availability from a single application of semisolid dairy manure would be 9 to 12%, and 3 to 5% of the original manure N application, respectively.     

Sorption dynamics of organic and inorganic phosphorus compounds in soil

Phosphorus retention in soils is influenced by the form of P added. The potential impact of one P compound on the sorption of other P compounds in soils has not been widely reported. Sorption isotherms were utilized to quantify P retention by benchmark soils from Indiana, Missouri, and North Carolina when P was added as inorganic P (Pi) or organic P (beta-D-glucose-6-phosphate, G6P; adenosine 5'-triphosphate, ATP; and myoinositol hexaphosphate, IP6) and to determine whether soil P sorption by these organic P compounds and Pi was competitive. Isotherm supernatants were analyzed for pH and total P using standard protocols, while Pi and organic P compounds were assayed using ion chromatography. Under the controlled conditions of this study, the affinity of all soils for P sources followed the order IP6 > G6P > ATP > Pi. Each organic P source had a different potential to desorb Pi from soils, and the order of greatest to least Pi desorption was G6P > ATP > IP6. Glucose-6-phosphate and ATP competed more directly with Pi for sorption sites than IP6 at greater rates of P addition, but at the lesser rates of P addition, IP6 actually desorbed more Pi. Inositol hexaphosphate was strongly sorbed by all three soils and was relatively unaffected by the presence of other P sources. Decreased total P sorption due to desorption of Pi can be caused by relatively small additions of organic P, which may help explain vertical P movement in manured soils. Sorption isotherms performed using Pi alone did not accurately predict total P sorption in soils.     

Decommissioning of offshore oil and gas facilities: a comparative assessment of different scenarios

A material and energy flow analysis, with corresponding financial flows, was carried out for different decommissioning scenarios for the different elements of an offshore oil and gas structure. A comparative assessment was made of the non-financial (especially environmental) outcomes of the different scenarios, with the reference scenario being to leave all structures in situ, while other scenarios envisaged leaving them on the seabed or removing them to shore for recycling and disposal. The costs of each scenario, when compared with the reference scenario, give an implicit valuation of the non-financial outcomes (e.g. environmental improvements), should that scenario be adopted by society. The paper concludes that it is not clear that the removal of the topsides and jackets of large steel structures to shore, as currently required by regulations, is environmentally justified; that concrete structures should certainly be left in place; and that leaving footings, cuttings and pipelines in place, with subsequent monitoring, would also be justified unless very large values were placed by society on a clear seabed and trawling access.     

Use of geographic information systems for assessing groundwater pollution potential by pesticides in Central Thailand

This study employed geographic information systems (GIS) technology to evaluate the vulnerability of groundwater to pesticide pollution in Thailand. The study area included three provinces, Kanchana Buri, Ratcha Buri, and Suphan Buri, located in west-central Thailand. Factors used for the vulnerability assessment included soil texture, slope, land use, well depth, and rainfall. These vulnerability factors were reclassified to a common scale, and a weighted average was computed to yield a vulnerability score. Vulnerability factors and weights were assigned considering pesticide concentrations in 90 wells throughout the study area. Well depth was the most significant vulnerability factor. Groundwater vulnerability maps were generated for several pesticides. The eastern, agricultural part of the study area has relatively deep wells and fine soils. Shallow wells are present in the mountainous west; however, fewer pesticides are applied in that region. Consequently, much of the study area had a medium groundwater vulnerability rating, although there were pockets of high vulnerability, for example, in agricultural areas with shallow wells. The groundwater vulnerability maps are effective for identifying locations warranting more detailed groundwater pollution and vulnerability investigations.