A technicoeconomic approach for the selection of a site remediation strategy--part B: model application

Different tools, such as a screening matrix or decision framework, are available to select a remediation technology to treat a contaminated site. However, unless these methods can point out the appropriate technology in regards to the decision-maker's knowledge about the contaminated site, they are less useful to evaluate both the technical effectiveness and the cost of the remediation, and to assess different remediation strategies from either future data acquisition or the use of an irreversible remediation technology. A model developed to allow such evaluations has been used to simulate the remediation of a virtual contaminated site. From this, four remediation recommendations have been made. These recommendations are guidelines for the build up of a remediation strategy that would both maximize the effectiveness of the decontamination and minimize its total cost.     

Chemical and microbial hypotheses explaining the effect of wastewater treatment plant discharges on the nitrifying communities in freshwater sediment

Nitrification is a microbial key step of the nitrogen cycle, which performs the oxidation of ammonium to nitrate, via nitrite. In aquatic environments, it mainly takes place in the sediment or is associated with suspended particles. Wastewater treatment plant (WTP) discharges in rivers may disrupt sediment nitrification: this impact is related to nitrogen inputs (mainly NH(4)(+) and organic nitrogen) but could also depend on the nitrifying bacteria inputs which have been proved to survive downstream WTP discharge points. The aim of the present study was to assess the effect of NH(4)(+) and nitrifying bacteria inputs on the two steps of nitrification in freshwater sediments.To avoid natural sites constraints and to control the main environmental parameters, we used microcosms to simulate a river receiving different types of WTP discharges. These microcosms were composed of five glass dual-walls reactors (6 l) containing sediment and continuously filled (controlled flow) with river water and WTP effluent. Two types of effluents were tested: a non-nitrified one (high NH(4)(+) input, very few nitrifying bacteria) and a nitrified one (low NH(4)(+) input, more nitrifying bacteria), at different effluent/freshwater ratios (0/100, 20/80, 40/60 and 80/20). Changes in the ammonium- and nitrite-oxidizing communities were assessed by the Most Probable Number method, and changes in potential ammonium-oxidizing activity and potential nitrite-oxidizing activity were determined by incubations with specific inhibitors (sodium chlorate and allylthiourea).In most of the cases the presence of effluent induced significant changes of the nitrifying bacteria densities and potential activities in the sediment. This effect indicates generally a loss of specific potential activity and in most of the time is significant for a high effluent/river water ratio (40% to 80%). In our experimental conditions and in the case of a large WTP discharge, the nitrifying potential in freshwater sediments could thus be significantly modified.     

Testicular histopathology in deer mice (Peromyscus maniculatus) following exposure to polychlorinated biphenyl

Adult deer mice testes were subjected to routine histopathology following exposure to Aroclor 1254 supplemented diet (5 ppm), for 30 days. Body and testicular weight revealed no statistical significance between the control and treated animals. From a histological standpoint the testes of the controls were similar to normal murids and other animals. In contrast, the testes from treated animals displayed seminiferous tubules with significant degenerative alterations. These alterations included fewer layers of seminiferous epithelium exaggerated intercellular spaces and appearance of pyknotic nuclei. Most tubules displayed subluminal nuclei that morphologically could be identified as part of spermatozoa heads and these usually lacked tails, indicating that the treatment interfered with spermiogenesis. Therefore, we concluded that Aroclor 1254 as an environmental contaminant is highly destructive to seminiferous tubules, and that these histological alterations undoubtedly are responsible for the depressed fertility in Peromyscus following chronic exposure to PCBs, that has been reported in the literature.     

Hydrolyzable poly(ethylene terephthalate)

Due to the enormous annual increase in the volume of municipal solid waste, society's attention is focused on how to manage the solid waste problem. Plastic materials not only contribute a great deal to the litter problem but also create serious danger to the ecology. Every year, countless birds, sea turtles, and other marine mammals die from eating or getting entangled in plastic litter. Synthesizing degradable polymers can have a great impact on solving the problem of plastic litter. We have modified the structure of poly(ethylene terephthalate) to make it degradable in typical environmental conditions in presence of water. The change of physical properties of modified poly(ethylene terephthalate), resulting from hydrolysis, has been monitored and compared with those of pure poly(ethylene terephthalate).     

CONFIDENCE INTERVALS FOR FLOOD EVENTS UNDER A PEARSON 3 OR LOG PEARSON 3 DISTRIBUTION1

ABSTRACT: The Pearson type 3 (P3) and log Pearson type 3 (LP3) distributions are very frequently used in flood frequency analysis. Existing methods for constructing confidence intervals for quantiles (X_p) of these two distributions are very crude. Most of these methods are based on the idea of adjusting confidence intervals for quantiles Y_p of the normal distribution to obtain approximate confidence inervals for quantiles X_p of the P3/LP3 distribution. Since there is no theoretical reason why this “base” distribution, Y, should be taken to be normal, we search in the present study for the best possible base distribution for producing confidence intervals for P3/LP3 quantiles. We consider a group of base distributions such as the normal, log normal, Weibull, Gumbel, and exponential. We first assume that the skew coefficient, γ of X, to be known, and develop a method for adjusting confidence intervals for Y_p to produce approximate confidence intervals for X_p. We then compare this method (Method A) with another method (Method B) introduced by Stedinger. Simulation shows that the performance of each of these two methods depends on the base distribution Y that is being used, but as a whole, the normal distribution appears to be the best-fit distribution for producing confidence intervals for P3/LP3 quantiles when γ is assumed to be known. We then extend our method (Method A) to the more important case of unknown coefficient of skewness. It is shown that by taking Y to be Weibull, fairly accurate confidence intervals for P3/LP3 quantiles can be obtained for quite a wide range of sample sizes and coefficients of skewness commonly found in hydrology. The case of the P3 distribution with negative skewness needs further research.     

A Hydrologic/Water Quality Model Applicati11

Abstract: This paper presents a procedure for standard application of hydrologic/water quality models. To date, most hydrologic/water quality modeling projects and studies have not utilized formal protocols, but rather have employed ad hoc approaches. The procedure proposed is an adaptation and extension of steps identified from relevant literature including guidance provided by the U.S. Environmental Protection Agency. This protocol provides guidance for establishing written plans prior to conducting modeling efforts. Eleven issues that should be addressed in model application plans were identified and discussed in the context of hydrologic/water quality studies. A graded approach for selection of the level of documentation for each item was suggested. The creation and use of environmental modeling plans is increasingly important as the results of modeling projects are used in decision‐making processes that have significant implications. Standard modeling application protocols similar to the proposed procedure herein provide modelers with a roadmap to be followed, reduces modelers’ bias, enhances the reproducibility of model application studies, and eventually improves acceptance of modeling outcomes.     

ROLE OF WATERSHED SUBDIVISION ON MODELING THE EFFECTIVENESS OF BEST MANAGEMENT PRACTICES WITH SWAT1

Distributed parameter watershed models are often used for evaluating the effectiveness of various best management practices (BMPs). Streamflow, sediment, and nutrient yield predictions of a watershed model can be affected by spatial resolution as dictated by watershed subdivision. The objectives of this paper are to show that evaluation of BMPs using a model is strongly linked to the level of watershed subdivision; to suggest a methodology for identifying an appropriate subdivision level; and to examine the efficacy of different BMPs at field and watershed scales. In this study, the Soil and Water Assessment Tool (SWAT) model was calibrated and validated for streamflow, sediment, and nutrient yields at the outlet of the Dreisbach (623 ha) and Smith Fry (730 ha) watersheds in Maumee River Basin, Indiana. Grassed waterways, grade stabilization structures, field borders, and parallel terraces are the BMPs that were installed in the study area in the 1970s. Sediment and nutrient outputs from the calibrated model were compared at various watershed subdivision levels, both with and without implementation of these BMPs. Results for the study watersheds indicated that evaluation of the impacts of these BMPs on sediment and nutrient yields was very sensitive to the level of subdivision that was implemented in SWAT. An optimal watershed subdivision level for representation of the BMPs was identified through numerical simulations. For the study watersheds, it would appear that the average subwatershed area corresponding to approximately 4 percent of total watershed area is needed to represent the influence of these BMPs when using the SWAT model.     

The infinite-lived rat—An equal-age replacement process

Equal-age replacement is used to formulate the competing-risk problem in terms of a set of nonhomogenous Poisson processes whose mean value functions are the set of cumulative hazards (the integrals of the age-and cause-specific incidence rates). Cumulative hazard is estimated by a weighted count that is the sum of the reciprocals of numbers at risk at the times of occurrence of the specific risk. Occurrence data are generally insufficient to distinguish between plausible forms of the distribution function or types of nonparametric shifts with dose. More emphasis has to be given to understanding the biological mechanisms that dictate the parametric form to be fitted to the data.     

A tunable diode laser absorption spectrometer for formaldehyde atmospheric measurements validated by simulation chamber instrumentation

A tunable diode laser absorption spectrometer (TDLAS) for formaldehyde atmospheric measurements has been set up and validated through comparison experiments with a Fourier transform infrared spectrometer (FT-IR) in a simulation chamber. Formaldehyde was generated in situ in the chamber from reaction of ethene with ozone. Three HCHO ro-vibrational line intensities (at 2909.71, 2912.09 and 2914.46 cm^-1) possibly used by TDLAS were calibrated by FT-IR spectra simultaneously recorded in the 1600-3200 cm^-1 domain during ethene ozonolysis, enabling the on-line deduction of the varying concentration for HCHO in formation. The experimental line intensities values inferred confirmed the calculated ones from the updated HITRAN database. In addition, the feasibility of stratospheric in situ HCHO measurements using the 2912.09 cm^-1 line was demonstrated. The TDLAS performances were also assessed, leading to a 2σ detection limit of 88 ppt in volume mixing ratio with a response time of 60 sec at 30 Torr and 294 K for 112 m optical path. As part of this work, the room-temperature rate constant of this reaction and the HCHO formation yield were found to be in excellent agreement with the compiled literature data.     

The concept of resilience revisited

The intimate connections between disaster recovery by and the resilience of affected communities have become common features of disaster risk reduction programmes since the adoption of The Hyogo Framework for Action 2005-2015. Increasing attention is now paid to the capacity of disaster-affected communities to 'bounce back' or to recover with little or no external assistance following a disaster. This highlights the need for a change in the disaster risk reduction work culture, with stronger emphasis being put on resilience rather than just need or vulnerability. However, varied conceptualisations of resilience pose new philosophical challenges. Yet achieving a consensus on the concept remains a test for disaster research and scholarship. This paper reviews the concept in terms of definitional issues, the role of vulnerability in resilience discourse and its meaning, and the differences between vulnerability and resilience. It concludes with some of the more immediately apparent implications of resilience thinking for the way we view and prepare for disasters.