Neutralisation of an acidic pit lake by alkaline waste products

A former open pit where black shale (alum shale) was excavated during 1942–1965 has been water filled since 1966. The water chemistry was dominated by calcium and sulphate and had a pH of 3.2–3.4 until 1997–1998, when pH was gradually increasing. This was due to the intrusion of leachates from alkaline cement waste deposited close to the lake. A stable pH of around 7.5 was obtained after 6–7 years. The chemistry of the pit lake has changed due to the neutralisation. Concentrations of some dissolved metals, notably zinc and nickel, have gone down, as a result of adsorption/co-precipitation on solid phases (most likely iron and aluminium hydroxides), while other metals, notably uranium and molybdenum, are present at elevated levels. Uranium concentration is reaching a minimum of around pH 6.5 and is increasing at higher pH, which may indicate a formation of neutral and anionic uranyl carbonate species at high pH (and total carbonate levels around 1 mM). Weathering of the water-exposed shale is still in progress.     

Biomonitoring of trace element air pollution: principles,possibilities and perspectives

This paper discusses the biomonitoring of trace element air pollution. Much attention is given to both lichens and mosses as the dominant plant species used in biomonitoring surveys. Biomonitoring is regarded as a means to assess trace element concentrations in aerosols and deposition. This implies that the monitor should concentrate the elements of interest and quantitatively reflect its elemental ambient conditions. Environmental impact on the biomonitor's behaviour is viewed as resulting in changes in the dose-response relationships. The current literature is briefly reviewed, for plant's behaviour modelling, for laboratory studies on physiological processes responsible for accumulation, retention and release, and for field work on quantification of dose-response relationships. Monitoring of elemental atmospheric availability is presented as deriving its relevance from presumed impact on both ecosystem performance and human health; source apportionment is regarded as an important parallel result for purposes of emission regulatory management. For source apportionment, the paper argues in favor of multi-elemental determinations, supplemented by information on organic compounds and elemental chemical forms. Furthermore, the discussion points towards more explicit coupling of biomonitoring data to knowledge and databases on both emission registration, ecosystem performance and human health. This means that multidisciplinary programs should be set up, which accommodate expert inputs from biomonitoring, emission control programs, analytical chemistry, ecology, and epidemiology.     

Determination of diazepam in aquatic samples by capillary liquid chromatography-electrospray tandem mass spectrometry

In recent years growing attention has been paid toward the discharge, presence and potential adverse effects of pharmaceuticals in the environment. Using different existing analytical methods several studies have already identified a variety of drugs in waste-, surface- and drinking water. The monitoring of surface waters for drugs is of great importance because drugs are designed to be biological very active substances. A capillary LC/ES-MS-MS method has been developed that enables the sensitive and specific detection of diazepam in water samples up to 0.1 ng/ml (LOD). It requires neither multiple extraction steps, nor the use of large volumes of organic solvent. Applying this assay we have detected diazepam in 'in/effluent samples' collected in Belgium and demonstrated the applicability for water analysis without off-line pre-concentration of the analyte.     

Assessment of plasma gasification of high caloric waste streams

Plasma gasification is an innovative technology for transforming high calorific waste streams into a valuable synthesis gas and a vitrified slag by means of a thermal plasma. A test program has been set up to evaluate the feasibility of plasma gasification and the impact of this process on the environment. RDF (refuse derived fuel) from carpet and textile waste was selected as feed material for semi-pilot gasification tests. The aim of the tests was: (1) to evaluate the technical feasibility of making a stable synthesis gas; (2) to characterize the composition of this synthesis gas; (3) to define a suitable after-treatment configuration for purification of the syngas and (4) to characterize the stability of the slag, i.e., its resistance to leaching for use as a secondary building material. The tests illustrate that plasma gasification can result in a suitable syngas quality and a slag, characterized by an acceptable leachability. Based on the test results, a further scale-up of this technology will be prepared and validation tests run.     

Vibrating hand-held machines in the construction industry

The aim of this study was to investigate and measure vibration levels of the most commonly used machines within the construction industry. In the report 186 hand-held machines divided into more than 15 different machine groups have been studied. The project is a joint venture between Bygghälsan (The Constructions Industry's Organization for Working Environment, Safety & Health) and the National Institute of Occupational Health.     

Use of stridulation in foraging leaf-cutting ants: mechanical support during cutting or short-range recruitment signal?

Foraging leaf-cutting ant workers stridulate while cutting a leaf fragment. Two effects of stridulation have recently been identified: (i) attraction of nestmates to the cutting site, employing substrate-borne stridulatory vibrations as short-range recruitment signals, and (ii) mechanical facilitation of the cut via a vibratome-effect. We asked whether foragers actually stridulate to support their cutting behavior, or whether the mechanical facilitation is an epiphenomenon correlated with the use of stridulation as recruitment signal. To differentiate between the two alternatives, workers of two different Atta species were presented with tender leaves of invariant physical traits, and their motivation to initiate recruitment was manipulated by varying the palatability of the leaves and the starvation of the colony. The lower the palatability of the harvested leaves, the lower the percentage of workers that stridulated while cutting, irrespective of the leaf’s physical features. After intense feeding, no workers were observed to stridulate while cutting tender leaves, and the percentage of stridulating workers increased with deprivation time. The results support the hypothesis that leaf-cutting ant workers stridulate during cutting in order to recruit nestmates, and that the observed mechanical facilitation of stridulation is an epiphenomenon of recruitment communication. Received: 25 January 1996/Accepted after revision: 13 July 1996     

Information Management for Public Participation in Co-design Processes: Evaluation of a Dutch Example

Impact assessment and project appraisal are taking a participatory track but the potential gain from the information, creativity and values stakeholders bring to the process is seldom realized. At issue is the design and preliminary screening of alternatives, which remains the domain of experts: designers, architects and engineers. The authors were involved in a participatory 'quick scan' project around the passage of a new high-speed rail line in which participants were actively involved in generating and screening alternatives. In this case study report they will show that deliberate information management in the design and evaluation of alternatives offers potential for better outcomes, but that the absence of stimulation of participant creativity and insufficient embedding of the participatory process in the larger political setting may prevent this.     

超高效液相色谱/电喷雾串联质谱(UPLC/MS/MS)分析全氟代化合物(PFCs)

近年来,在全球范围内的环境和人体血液中检测到全氟代化合物(PFCs)增长的趋势,引起了研究者和有关当局的关注.PFCs同时具有亲水性和疏水性,经常用于地毯、纤维、皮革的处理、纸张和食品包装物等,也是塑料生产、灭火剂、抛光剂和杀虫剂的功能化学品.     

Modeling obsolete computer stock under regional data constraints: An Atlanta case study

In this paper, we report on our efforts to develop a research framework that can be used to quantify waste flows for different geographical areas in the face of limited waste data availability. We demonstrate this framework in our case study of obsolete computers in the Atlanta metropolitan area. We develop computer obsolescence rates at the national metropolitan level, and couple this data with economic information at the census tract level to generate product inventory estimates (PIE) of the stock of obsolete computers from both business and household sectors in the Atlanta metropolitan area. We seek to improve the accuracy of waste flow estimates for specific geographic areas over those of previous studies, provide an easily replicable and cost effective methodology, highlight the ensuing spatial implications for collection and recycling systems using GIS, and demonstrate the potential economic benefits from diverting electronic wastes within a region. The modeling framework we have developed is intended to be applicable to other regions and to other medium range durable goods discarded by households, businesses, or obtained from buildings.