Elemental Composition of Urban Aerosol Collected in Florence, Italy

An extensive investigation is in progress aiming at the characterisation of the air particulate composition in Florence. For our investigation, we use the external PIXE-PIGE beam facility of the I.N.F.N. Van de Graaff accelerator at the Physics Department of the Florence University. In order to gather information on both the longer- and shorter-time trends of the aerosol elemental composition, we are analysing both long temporal series (about 1 year) of 24-h Millipore filters collected by the health authorities in 3 different sites, and filters collected simultaneously in two of the above sites for about one month, by two streakers with one-hour resolution, providing size fractionation between particle size smaller than 2.5 µm and from 2.5 µm to 10 µm. The streakers sampling period includes two days during which the Municipality of Florence has banned the circulation of non-catalytic cars, due to the increase of NO₂ above the "recommended safety values". We present here the first obtained results for the sampling site located near a heavy traffic road.     

Human bioaccessibility of Cr, Cu, Ni, Pb and Zn in urban soils from the city of Torino, Italy

Several physiologically based extraction procedures have been proposed to estimate the fraction of the potentially toxic element content that would be bioaccessible in the human gastro-intestinal tract following accidental ingestion of soil. Many of these procedures are complex, they have been applied to a very limited range of soils, and most work has focussed on arsenic and lead. In the present study, a simplified, two-stage extraction, simulating the human stomach and intestine, was developed and applied to urban soil samples from ten public-access areas in the City of Torino, Italy. The human oral bioaccessibility of chromium, copper, nickel, lead and zinc was estimated. Lead and zinc bioaccessibilities were found to be higher in the stomach, but chromium was more bioaccessible in the intestine. Analyte concentrations were higher in roadside soils than in soils from parks. A higher proportion of the soil metal content was found in bioaccessible forms at roadsides than in parks. Comparison of the current findings with results of earlier work involving sequential extraction of the same soils indicated that the sequential procedure gave a relative, but not an absolute, indication of bioaccessibility. Calculations based on the bioaccessible analyte concentrations suggest that ingestion of only 2–3 g of some of the roadside soil samples from Torino could deliver the tolerable daily oral intake of chromium, nickel and lead to a 20-kg child. The developed procedure is useful for preliminary screening of soils and prediction of whether their bioaccessible metal contents are likely to pose a risk to human health.     

Is there a double-dividend from anti-sprawl policies?

This paper examines the welfare effects of anti-sprawl policies, such as development tax, in a simple spatial explicit urban model with two market failures - urban decline at the city core and underprovision of open space amenities at the urban fringe - and pre-existing distortionary property tax, used to fund public services and improvements to mitigate urban decline. Consistent with prior double-dividend literature, there is a tax interaction effect that occurs between the development tax and the pre-existing property tax. However, there are two fundamental differences between the tax interaction effect identified here and that of prior literature. Ours one has two components: First, there is a cost-side tax interaction effect that is ‘spatially’ concentrated at the urban fringe, as only agents at the urban fringe alter their behavior in response to the development tax. Second, there is also a benefit-side tax interaction effect, as increases in open space at the urban fringe are capitalized into housing prices throughout the city. In contrast to prior literature, we find that the empirical importance of the combined tax interaction effect is of substantially less importance and, as a consequence, the likelihood of a ‘double-dividend’ is higher than in prior studies. Further, we show that the development tax should be part of the local tax system, even in the absence of open space benefits.     

Effective removal of non-steroidal anti-inflammatory drug from wastewater by adsorption process using acid-treated Fagopyrum esculentum husk

Environmental Science and Pollution Research - In this work, buckwheat husks (Fagopyrum esculentum) were modified by acid treatment and posteriorly employed to remove the ketoprofen in batch...     

Potentially toxic elements contamination in urban soils: a comparison of three European cities

Studies on several cities around the world confirm that urban soils are subject to heavy anthropogenic disturbance. However, these surveys are difficult to compare due to a lack of common sampling and analytical protocols. In this study the soils of Ljubljana (Slovenia), Sevilla (Spain), and Torino (Italy) were extensively sampled and analyzed using common procedures. Results highlighted similarities across the cities, despite their differences in geography, size, climate, etc. Potentially toxic elements (PTE) showed a wide range in concentration reflecting a diffuse contamination. Among the "urban" elements Pb exceeded the legislation threshold in 45% of Ljubljana, 43% of Torino, and 11% of Sevilla samples while Zn was above the limits in 20, 43, and 2% of the soils of Ljubljana, Torino, and Sevilla, respectively. The distribution of PTE showed no depth-dependant changes, while general soil properties seemed more responsive to anthropogenic influences. Multivariate statistics revealed similar associations between PTE in the three cities, with Cu, Pb, and Zn in a group, and Ni and Cr in another, suggesting an anthropogenic origin for the former group and natural one for the latter. Chromium and Ni were unaffected by land use, except for roadside soils, while Cu, Pb, and Zn distribution appeared to be more dependent on the distance from emission sources. Regardless of the location, climate, and size, the "urban" factor--integrating type and intensity of contaminant emission and anthropogenic disturbance--seems to prevail in determining trends of PTE contamination.     

Diel periodicity of pheromone release by females of Planococcus citri and Planococcus ficus and the temporal flight activity of their conspecific males

The diel periodicity of sex pheromone release was monitored in two mealybug species, Planococcus citri and Planococcus ficus (Hemiptera; Pseudococcidae), using sequential SPME/GCMS analysis. A maximal release of 2 ng/h pheromone by 9–12-day-old P. citri females occurred 1–2 h before the beginning of photophase. The highest release of pheromone by P. ficus females was 1–2 ng/2 h of 10–20-day-old females, approximately 2 h after the beginning of photophase. Mating resulted in termination of the pheromone release in both mealybug species. The temporal flight activity of the males was monitored in rearing chambers using pheromone baited delta traps. Males of both P. citri and P. ficus displayed the same flight pattern and began flying at 06:00 hours when the light was turned on, reaching a peak during the first and second hour of the photophase. Our results suggest that other biparental mealybug species display also diel periodicities of maximal pheromone release and response. Direct evaluation of the diel periodicity of the pheromone release by the automatic sequential analysis is convenient and will be very helpful in optimizing the airborne collection and identification of other unknown mealybug pheromones and to study the calling behavior of females. Considering this behavior pattern may help to develop more effective pheromone-based management strategies against mealybugs.     

Industrial point source CO<Subscript>2</Subscript> emission strength estimation with aircraft measurements and dispersion modelling

CO₂ remains the greenhouse gas that contributes most to anthropogenic global warming, and the evaluation of its emissions is of major interest to both research and regulatory purposes. Emission inventories generally provide quite reliable estimates of CO₂ emissions. However, because of intrinsic uncertainties associated with these estimates, it is of great importance to validate emission inventories against independent estimates. This paper describes an integrated approach combining aircraft measurements and a puff dispersion modelling framework by considering a CO₂ industrial point source, located in Biganos, France. CO₂ density measurements were obtained by applying the mass balance method, while CO₂ emission estimates were derived by implementing the CALMET/CALPUFF model chain. For the latter, three meteorological initializations were used: (i) WRF-modelled outputs initialized by ECMWF reanalyses; (ii) WRF-modelled outputs initialized by CFSR reanalyses and (iii) local in situ observations. Governmental inventorial data were used as reference for all applications. The strengths and weaknesses of the different approaches and how they affect emission estimation uncertainty were investigated. The mass balance based on aircraft measurements was quite succesful in capturing the point source emission strength (at worst with a 16% bias), while the accuracy of the dispersion modelling, markedly when using ECMWF initialization through the WRF model, was only slightly lower (estimation with an 18% bias). The analysis will help in highlighting some methodological best practices that can be used as guidelines for future experiments.     

Tensile Behavior of Thermoplastic Films from Wheat Flours as Function of Raw Material Baking Properties

The production of bioplastics directly from wheat flour has been demonstrated to be reliable, but scarce knowledge is available on how flour characteristics may affect the performance of thermoplastic films. In this work, we first established the most suitable recipe and process for the production of extruded films and then we used eight single-cultivar wheat flours with different baking technological properties to assess how they affect the mechanical properties of thermoplastic films. The results have shown that flours from soft grain cultivars offered more rigid and deformable films than flours from hard grain cultivars. For similar hardness, the alveographic P/L ratio of the dough was inversely related to rigidity and directly related to deformability of plastic films, while the deformation energy of the dough (W) played a role only for great differences of it. The subsequent fabrication of blends between each of the flours that yielded the best film properties and polycaprolactone (PCL) at different proportions indicated that a wheat flour/PCL ratio (TWF/PCL) of 75/25 offered the most suitable films for further application. Our results are likely to be useful for improving the plasticization of flour, in that selection of wheat flours could be tailored on the properties desired for the bioplastic films.