Use of gold mill tailings in making bricks: a feasibility study.

Mill tailings dumps at Kolar Gold Fields, Karnataka, are creating environmental problems. One of the solutions to these problems is to use the mill tailings for some useful purpose. This study examined the possibility of making bricks from the mill tailings with some additives in laboratory experiments. Samples of the mill tailings and the additives were analysed for particle size distribution, Atterberg limits and specific gravity. The plasticity index of the mill tailings being zero, they could not be used directly for making bricks. Therefore some additives that had plasticity or binding properties were mixed with the mill tailings. Ordinary Portland cement, black cotton soils and red soils were selected as additives. Each of the additives was mixed separately with the mill tailings in different proportions by weight and a large number of bricks were prepared using metallic moulds. The bricks were termed as cement-tailings bricks or soil-tailings bricks, depending on the additives used. The cement-tailings bricks were cured for different periods and their corresponding compressive strengths were determined. The bricks with 20% of cement and 14 days of curing were found to be suitable. The soil-tailings bricks were sun-dried and then fired in a furnace at different temperatures. The quality of bricks was assessed in terms of linear shrinkage, water absorption and compressive strength. The cost analysis revealed that cement-tailings bricks would be uneconomical whereas the soil-tailings bricks would be very economical.     

Forest-based biomass supply potential and economics for the pellet production in Nepal

In the current study, the potential of forest-based biomass supply for the pellet production in Nepal is investigated. This study showed that about 2.76 million tonnes (Mt) biomass in the form of pellets are potentially available from forest-based biomass. Considering a processing capacity of 6 tonnes (t)/hr of a pellet plant, the production cost of the pellets was calculated to be $43.53/t. Pellets are generally used as fuel to produce thermal energy in industries, which helps to save the economy and the environment of the country.     

Simulating the Impacts of Irrigation Levels on Soybean Production in Texas High Plains to Manage Diminishing Groundwater Levels

There is an increasing need to strategize and plan irrigation systems under varied climatic conditions to support efficient irrigation practices while maintaining and improving the sustainability of groundwater systems. This study was undertaken to simulate the growth and production of soybean [Glycine max (L.)] under different irrigation scenarios. The objectives of this study were to calibrate and validate the CROPGRO‐Soybean model under Texas High Plains’ (THP) climatic conditions and to apply the calibrated model to simulate the impacts of different irrigation levels and triggers on soybean production. The methodology involved combining short‐term experimental data with long‐term historical weather data (1951–2012), and use of mechanistic crop growth simulation algorithms to determine optimum irrigation management strategies. Irrigation was scheduled based on five different plant extractable water levels (irrigation threshold [ITHR]) set at 20%, 35%, 50%, 65%, and 80%. The calibrated model was able to satisfactorily reproduce measured leaf area index, biomass, and evapotranspiration for soybean, indicating it can be used for investigating different strategies for irrigating soybean in the THP. Calculations of crop water productivity for biomass and yield along with irrigation water use efficiency indicated soybean can be irrigated at ITHR set at 50% or 65% with minimal yield loss as compared to 80% ITHR, thus conserving water and contributing toward lower groundwater withdrawals. Editor's note: This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

Effect of waterborne boron and molybdenum on survival,growth and feed intake of Indian major carp,Cirrhinus mrigala (Hamilton)

The effect of either boron (B) or molybdenum (Mo) on survival, growth and feed intake of Indian major carp, Cirrhinus mrigala (Hamilton), advanced fry was studied in two separate experiments. Survival rates of C. mrigala fry (2.78±0.14 g) following 50 days’ exposure to B at 0.01 (control), 0.5, 1.0, 2.0, 4.0 and 8.0 mg·L ^?1 were 100% at all concentrations except 8.0 mg·L ^?1 where the survival rate 87.5±7.5%. We observed 100% survival of mrigala fry at all concentrations of Mo, 0.02 (control), 0.5, 1.0, 2.0, 4.0 and 8.0 mg·L ^?1. Both B and Mo at 0.5 mg·L ^?1 showed significantly (p<0.05) higher growth of the fish compared with control and other concentrations. B exposure at 1.0, 2.0 and 4.0 mg·L ^?1 had no significant effect on growth rate, whereas at 8.0 mg B·L ^?1 growth of the fish almost ceased. Mo exposure at 1.0, 2.0, 4.0 and 8.0 mg·L ^?1 caused no significant effect on growth rate of the fish compared to control. Both B and Mo at all concentrations had no significant effect on feed intake of the fish compared with control, except at the highest concentration of boron (8.0 mg·L ^?1).     

Optimal Design of Ozone Bleaching Parameters to Approach Cellulose Nanofibers Extraction from Sugarcane Bagasse Fibers

Cellulose nanofibers (CNFs) were isolated from sugarcane bagasse (SCB) through the combination of bio-refinery, sulfur-free, and totally chlorine free (TCF) chemo-mechanical pretreatments, with a focus on the optimal design of ozone bleaching parameters based on a response surface methodology (RSM). For this purpose, the most effective parameters in ozone bleaching (temperature, time, and pulp consistency) were set between 40 and 85 °C, 60 and 360 min, and 1–5 wt%, respectively. High-performance liquid chromatography (HPLC), Fourier transform infrared spectroscopy (FTIR), Kappa number, and scanning electron microscopy (SEM) were used to chemically and morphologically characterize the SCB fibers. The size distribution and morphology of CNFs were also evaluated by dynamic light scattering (DLS) and transmission electron microscopy (TEM). HPLC analysis revealed that percentage of cellulose increased from 41.5 to 91.39% after chemical pretreatments. FTIR and Kappa number analyses also confirmed the successful isolation of cellulose fibers from the SCB fibers after chemical pretreatments. Furthermore, DLS results showed that the hydrodynamic diameter of the isolated cellulose fibers reduced to 268 nm by dint of ultrasonication. Additionally, TEM images confirmed the isolation of CNFs: the average diameter of cellulose fibers decreased to about 28 nm after mechanical steps and the yield of fibrillation was found to be around 99%. According to the obtained results, the applied chemo-mechanical treatment appears to be promising for green and facile isolation of CNFs.     

Thermodynamic analysis of metals recycling out of waste printed circuit board through secondary copper smelting

Journal of Material Cycles and Waste Management - In this paper, a detailed thermodynamic analysis of processing of electronic waste (e-waste), particularly printed circuit boards (PCB), through...     

Metal concentrations in water, sediment, and fish from sewage-fed aquaculture ponds of Kolkata, India

The concentrations of lead, cadmium, chromium, copper, and zinc were investigated in the sewage-fed pond water, sediment, and the various organs of Labeo rohita, Catla catla, Cirrhinus mrigala, Oreochromis mossambicus, and Cyprinus carpio cultured in sewage-fed ponds, Kolkata, India. Among the metals, cadmium, lead, and zinc were detected in water and, except lead, were below the water quality guideline levels for the protection of freshwater aquatic life proposed by CEQG (Canadian Environmental Quality Guidelines) and AENV (Alberta Environment). Therefore, lead could pose danger to aquatic organisms. All the five metals were detected in the sediment and, except cadmium and lead, were below the sediment quality guideline levels for aquatic life proposed by EPA (Environmental Protection Agency). Therefore, these two metals could be toxic to aquatic organisms. Significant (P > 0.05) differences were observed among the five fish species for all these metals accumulation. Also, significant (P > 0.05) differences were noticed among these metals accumulation in fish organs. Cadmium showed the least bioaccumulation, while zinc showed the highest bioaccumulation in all the fish species. Though the metal concentration in the different fish tissues was variable, the highest concentration was found in kidney and the lowest in the muscle. Concentrations of these metals in the muscle tissue of all the fish species were well below the consumption safety tolerance in fish set by WHO/FAO, and thus, so far as these metals are concerned, these sewage-fed cultured fishes are safe and suitable for human consumption.     

Ultrastructural changes in the respiratory lamellae of the catfish, Heteropneustes fossilis after sublethal exposure to malathion

Transmission electron microscopy study of the gills of Heteropneustes fossilis, exposed to 4 mg/liter of malathion (1/3 of LC50) for 24, 48, 72, and 96 h showed significant changes in its ultrastructures. Exposure to the pesticide after 24 h caused a slightly disarrayed condition in the double layered epithelial structure. Lymphatic spaces became more apparent, and a few chloride cells appeared which protruded toward the peripheral margin of the secondary lamellae. Chloride cells were exposed to the exterior by an apical pit. Pinocytosis was observed with marginal folds (MF) originating from the pillar and epithelial cells. Some vascular constrictions were also seen in the capillaries with erythrocytes. After 48 h exposure, the outer epithelial cells were stretched into a thin boundary wall and lymphatic spaces were engorged with plasma exudate. Chloride cells transversed the whole epithelium of the lamella and came into direct contact with lymphoid space and exterior to epithelial lining. Basement membrane of the capillaries became thicker. After 72 h a distorted lamellar epithelium ruptured in a few places allowing many spheroid bodies and some chloride cells come out. Marginal folds of pillar cells migrated into vascular spaces. Basement membrane of capillaries became thicker and blood channels were constricted causing vascular stasis. No erythrocytes were visible. Blood channels were filled with leukocytes and amoebocytes. After 96 h exposure to malathion narrowing of lymphatic spaces, proliferation of epithelial cells and development of pinocytotic vesicles from marginal folds of pillar cell flanges were observed. Only marginal blood channels maintained normal configuration. Vascular stasis due to thickening of the basal lamina were still evident in centrally located blood channels filled with leukocytes. Vascular stasis would likely cause a decrease in respiratory efficiency. This study has revealed that the gills of H. fossilis were affected by a sublethal dose of malathion. The ultrastructural damages to the gills were observed as early as at 24 h exposure, but the most severe damage occurred at 72 h exposure. However, signs of gill structure regeneration were seen in malathion-exposed fish after 96 h.     

Arsenic tolerances in rice (Oryza sativa) have a predominant role in transcriptional regulation of a set of genes including sulphur assimilation pathway and antioxidant system

World wide arsenic (As) contamination of rice has raised much concern as it is the staple crop for millions. Four most commonly cultivated rice cultivars, Triguna, IR-36, PNR-519 and IET-4786, of the West Bengal region were taken for a hydroponic study to examine the effect of arsenate (As^V) and arsenite (As^III) on growth response, expression of genes and antioxidants vis-à-vis As accumulation. The rice genotypes responded differentially under As^V and As^III stress in terms of gene expression and antioxidant defences. Some of the transporters were up-regulated in all rice cultivars at lower doses of As species, except IET-4786. Phytochelatin synthase, GST and γ-ECS showed considerable variation in their expression pattern in all genotypes, however in IET-4786 they were generally down-regulated in higher As^III stress. Similarly, most of antioxidants such as superoxide dismutase (SOD), ascorbate peroxidase (APX), guaiacol peroxidase (GPX), catalase (CAT), monodehydroascorbate reductase (MDHAR) and dehydroascorbate reductase (DHAR) increased significantly in Triguna, IR-36 and PNR-519 and decreased in IET-4786. Our study suggests that Triguna, IR-36 and PNR-519 are tolerant rice cultivars accumulating higher arsenic; however IET-4786 is susceptible to As-stress and accumulates less arsenic than other cultivars.