Nitrogen evolution during the co-combustion of hydrothermally treated municipal solid waste and coal in a bubbling fluidized bed

Nitrogen evolution was studied during the co-combustion of hydrothermally treated municipal solid wastes (HT MSW) and coal in a bubbling fluidized bed (BFB). HT MSW blending ratios as 10%, 20% and 30% (wt.%) were selected and tested at 700, 800, 900 °C. Emissions of NO and N₂O from blends were measured and compared with the results of mono-combustion trials. Moreover, concentrations of precursors like NH₃ and HCN were also quantified. The results are summarized as follows: NO emissions were predominant in all the cases, which rose with increasing temperature. The blending of HT MSW contributed to the NO reduction. N₂O emissions decreased with temperature rising and the blending of HT MSW also presented positive effects. At 30% HT MSW addition, both NO and N₂O emissions showed the lowest values (391.85 ppm and 55.33 ppm, respectively at 900 °C). For the precursors, more HCN was detected than NH₃ and both played important roles on the gas side nitrogen evolution.     

Optimization of bio-drying of kitchen waste: inoculation,initial moisture content and bulking agents

Journal of Material Cycles and Waste Management - Bio-drying has been proved to be a promising method for treatment of MSW (municipal solid waste) and sewage sludge due to its high energy...     

Catalytic activities and mechanism of formaldehyde oxidation over gold supported on MnO<Subscript>2</Subscript> microsphere catalysts at room temperature

MnO₂ microspheres with various surface structures were prepared using the hydrothermal method, and Au/MnO₂ catalysts were synthesized using the sol-gel method. We obtained three MnO₂ microspheres and Au/MnO₂ samples: coherent solid spheres covered with wire-like nanostructures, solid spheres with nanosheets, and hierarchical hollow microspheres with nanoplatelets and nanorods. We investigated the properties and catalytic activities of formaldehyde oxidation at room temperature. Crystalline structures of MnO₂ are the main factor affecting the catalytic activities of these samples, and γ-MnO₂ shows high catalytic performance. The excellent redox properties are responsible for the catalytic ability of γ-MnO₂. The gold-supported interaction can change the redox properties of catalysts and accelerate surface oxygen species transition, which can account for the catalytic activity enhancement of Au/MnO₂. We also studied intermediate species. The dioxymethylene (DOM) and formate species formed on the catalyst surface were considered intermediates, and were ultimately transformed into hydrocarbonate and carbonate and then decomposed into CO₂. A proposed mechanism of formaldehyde oxidation over Au/MnO₂ catalysts was also obtained.     

Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery

Bio-drying can enhance the sortability and heating value of municipal solid waste (MSW), consequently improving energy recovery. Bio-drying followed by size sorting was adopted for MSW with high water content to improve its combustibility and reduce potential environmental pollution during the follow-up incineration. The effects of bio-drying and waste particle size on heating values, acid gas and heavy metal emission potential were investigated. The results show that, the water content of MSW decreased from 73.0% to 48.3% after bio-drying, whereas its lower heating value (LHV) increased by 157%. The heavy metal concentrations increased by around 60% due to the loss of dry materials mainly resulting from biodegradation of food residues. The bio-dried waste fractions with particle size higher than 45 mm were mainly composed of plastics and papers, and were preferable for the production of refuse derived fuel (RDF) in view of higher LHV as well as lower heavy metal concentration and emission. However, due to the higher chlorine content and HCl emission potential, attention should be paid to acid gas and dioxin pollution control. Although LHVs of the waste fractions with size <45 mm increased by around 2× after bio-drying, they were still below the quality standards for RDF and much higher heavy metal pollution potential was observed. Different incineration strategies could be adopted for different particle size fractions of MSW, regarding to their combustibility and pollution property.     

Inorganic elemental concentrations in birch bolete mushroom (Leccinum scabrum) and top soil: contamination profiles,bioconcentation and annual variations

Abstract

Analysis of inorganic and organic contaminants in foodstuffs aids in understanding the human exposure to these compounds via consumption. In this study, an edible mushroom species (Leccinum scabrum) and top soil samples were analysed for essential and toxic substances including phosphorus and inorganic elements over a period of three fruiting seasons. Analysis of silver (Ag), aluminium (Al), barium (Ba), calcium (Ca), cadmium (Cd), cobalt (Co), copper (Cu), iron (Fe), mercury (Hg), potassium (K), magnesium (Mg), manganese (Mn), sodium (Na), nickel (Ni), phosphorus (P), lead (Pb), rubidium (Rb), strontium (Sr) and zinc (Zn) in mushrooms and topsoil were performed using inductively coupled plasma optical emission spectroscopy (ICP-OES) with ultrasonic cross flow nebulizer. Total mercury was determined by cold-vapour atomic absorption spectroscopy (CV-AAS). The results exhibited wide variation in concentrations of metals between soil and mushroom (cap and stipes) during three fruiting seasons. Positive bioconcentration factors (BFCs) indicate on bioaccumulation of several metals including, Cd, Cu, Hg, K, Mg, Na, P, Rb and Zn in caps and stipes of fruitbodies of this mushroom, while other metals such as Al, Ba, Ca, Co, Fe, Mn, Ni, Pb and Sr were not exhibiting significant positive BFCs. Over a period studied, the caps were characterised by different (p?<?0.05) concentrations of Al, Co, Cu, Hg, Mn, Ni, P, Pb and Sr. Contamination profiles, temporal fluctuations, BCFs should be taken into consideration when assessing the nutritional value of this mushroom.     

南京北郊春季气溶胶吸湿性分析

大气气溶胶的吸湿性对气溶胶粒子的谱分布、云凝结核形成、气候强迫、人体健康等均有重要的影响.利用吸湿性串联差分迁移率分析仪(HTDMA)在2014年4月16日~5月21日对南京北郊的大气气溶胶吸湿特性进行观测.30~230 nm气溶胶粒子在90%相对湿度下的吸湿增长观测结果表明,气溶胶粒子的吸湿增长因子平均概率分布函数(GF-PDF)呈现明显的双峰分布,即一个占主导地位的强吸湿模态,和一个相对较小但仍很明显的弱吸湿模态.对吸湿性的日夜对比分析发现,整体上白天的气溶胶粒子吸湿性大于夜间气溶胶粒子,白天强吸湿模态的粒子数目比例高于夜间,夜间气溶胶粒子的外混合程度更高.利用HYSPLIT模式对气溶胶来源分析结果表明,观测期间南京北郊主要受到3类气团的影响.其中西北大陆气团背景下爱根核模态粒子在经过大陆的长距离输送过程后,老化程度较高,吸湿性也更强.而对于积聚模态粒子,则为来自东方气团的粒子吸湿性更强,强吸湿模态粒子数目比例也较高.局地气团背景下气溶胶粒子在各粒径段都具有较高的强吸湿比例.     

南京北郊秋冬季相对湿度及气溶胶理化特性对大气能见度的影响

为了解南京北郊秋冬季相对湿度与气溶胶理化特性对大气能见度的影响,利用2012年秋冬季气象要素资料、颗粒物浓度及其主要成分和气溶胶粒子谱分布等观测数据,分析了南京北郊大气能见度与气象要素、颗粒物污染之间的关系.结果表明,南京北郊秋冬季节平均大气能见度仅为4.76 km.颗粒物浓度与能见度存在一定的负相关关系,尤其细粒子对能见度的影响更为显著.随细粒子质量浓度和相对湿度(RH)的增大,低能见度出现的频率呈现上升趋势.能见度从5~10 km衰减到5km时,PM10和PM2.1质量浓度分别增加了7.56%和37.64%;其中SO2-4和NO-3质量浓度均有显著增加.气溶胶粒子数浓度对能见度的影响与相对湿度有关,粒径0.5~2μm的气溶胶数浓度随RH增加增长缓慢,而2~10μm范围内的粒子数浓度随RH增加而减小;结合气溶胶表面积浓度与能见度进行相关性分析,表明0.5~2μm的细粒子及相对湿度是导致南京北郊秋冬季大气能见度下降的主要因素.     

Utilization of coal fly ash in China: a mini-review on challenges and future directions

Environmental Science and Pollution Research - The rapid economic development in China places a large demand for energy, and as a result, thermal power plants in China are producing an enormous...     

Asymmetric investigation to track the effect of urbanization,energy utilization,fossil fuel energy and CO2 emission on economic efficiency in China: another outlook

Environmental Science and Pollution Research - The accelerated urbanization in China was already coupled with a steadily increasing demand for energy usage. The present study major aim was to...     

CO2 dynamic of Lake Donghu highlights the need for long-term monitoring

Environmental Science and Pollution Research - Inland freshwater lakes have been widely considered as significant sources of CO2 to the atmosphere. However, long-term measurements of CO2 dynamics...