柔性散粒材料静力及动力学性能实验研究

战场环境下单兵防常规炸弹爆炸抗震减震技术装备及器材,由于受经费投入、战场环境等因素影响,一直没有成功研制并得到装备.通过室内砂箱振动台震动模拟试验,测试了不同柔性散粒材料在震动条件下的加速度值,对其减震性能作了一些初步的探讨.通过研究,可以看到柔性散粒材料在隔震方面具有其他材料所不具有的优越性能,可以作为制造隔震器材的首选.     

出口角度对防烟空气幕防烟效果影响的数值模拟

利用火灾动力学模拟软件FDS,以四川消防研究所高层实验塔二层为原型,模拟在不同防烟空气幕出口角度情况下高层建筑前室烟气运动情况,获得在其他条件不变情况下,空气幕运行时的最佳出口角度。试验结果表明:空气幕角度为5°及20°时,模拟试验后期烟气基本突破了空气幕蔓延至前室内,而当出口角度为10°和15°时防烟效果较好,且15°时防烟效果优于10°,故推荐空气幕运行时的最佳出口角度为15°。     

基于风险场的评价理论研究

目前,已经有多种方法可以用于石油化工企业的定量风险评价,但是这些方法多数是基于二维的风险分析,不能满足当今社会日趋增长的三维空间的安全管理和风险评价要求,因此,提出了三维的风险场的评价理论,从三维风险等值面来考察风险的分布和风险变化率.该方法采用场论的基本知识,把风险场看作数量场,对不同事故的个人风险及其风险梯度进行叠加,得到个人风险及其变化率.针对同一个危险源产生的爆炸、火灾和中毒三种风险属性,给出了其叠加后的个人风险和个人风险变化率公式,在相应的坐标系中并对二维和三维个人风险的不同的空间分布进行了比较.该方法能够清晰、直观、全面地表示出个人风险场的分布情况,同时能够了解到多个风险共同作用下的风险变化情况.     

对重庆城镇网络建设的探讨

在分析重庆直辖市城镇化现状的基础上,针对重庆城镇网络中存在的问题,依据重庆发展城镇网络的优势,提出了建立新的城镇网络扔基本思路和构想,相关的对策与建议。     

Entry Deterrence and Signaling in a Nonrenewable Resource Model

We analyze a nonrenewable resource model in which an incumbent firm faces potential entry from a rival firm. The incumbent has private information about its stock size but the rival can observe extraction. With observable extraction and unobservable stock, the rival can use extraction as a signal about stock, from which it can infer whether entry is likely to be profitable. We characterize the necessary conditions for pooling and separating perfect Bayesian equilibria in a signaling game of resource extraction and provide examples of each. We show that the incumbent will often prefer pooling to separating even though welfare is higher in separating equilibrium.     

How should environmental exposure risk be assessed? A comparison of four methods for exposure assessment of air pollutions

Methods commonly used to assess the environmental exposure risk at a location (e.g., proximity models) are usually based on different assumptions, leading to conflicting results and recommendations in epidemiological studies. In this case study, a comparative evaluation of the accuracy levels associated with four commonly used exposure risk estimate models [i.e., traditional proximity model (TPM), emission weighted proximity model (EWPM), the American Meteorological Society/EPA regulatory model (AERMOD), and ordinary kriging interpolation (OKI)] were conducted. Results show that at the annual and the monthly scales, the normalized exposure risk values simulated by AERMOD and EWPM have higher accuracy levels than the simulations from the TPM and OKI methods. However, AERMOD has higher accuracy than that of the EWPM, and this was attributed to the differences of input data. EWPM provided the most accurate simulations when analysts have access to only point emission source data. The results also indicate that the accuracies of the exposure risks simulated by AERMOD and EWPM can be influenced by factors such as the modeling extent, the distance settings, and so forth.     

Characteristics and assessment of phthalate esters in urban dusts in Guangzhou city, China

Phthalate esters (PAEs) were examined in indoor and outdoor dust samples from the subtropical city of Guangzhou, China. The ∑(16)PAEs concentrations ranged from 121 to 3,223 μg g(-1) dust, with the median concentration of 840 μg g(-1) dust. Significantly higher concentrations of PAEs in dust samples were found in offices where electrical and electronic devices, carpet pads, and office furniture were widely used. Of the 16 PAEs, diisobutyl phthalate (DiBP), di-n-butyl phthalate (DnBP), and di(2-ethylhexyl) phthalate (DEHP) dominated the PAEs in indoor and outdoor dust samples, and accounted for >96.8% and >93.1% of the ∑(16)PAEs concentrations, respectively. The median daily inhalation exposure of ∑(16)PAEs were 3.53 and 0.247 μg kg(-1) body weight day(-1), and at the 95(th) percentile were 7.62 and 0.530 μg kg(-1) body weight day(-1), up on the measured concentrations and estimated dust ingestion rates, respectively, for toddles and adults. The ubiquitous distribution of PAEs as noted in this study suggests the need for detailed assessment of PAEs concentrations using more sites and to further investigate the factors influencing PAEs exposure in China.     

飞信通讯手段在突发环境污染事件处置时的应用

对现有移动通讯方式在突发环境污染事件中的应用进行了比较。通过实例,简述了飞信作为突发环境污染事件应急处置时通讯方式的应用。结果表明,飞信综合了一对一、多对多的语音和图文信息传输方式,在技术资料支持和监测结果通报方面具有明显的实用价值,配合防爆型对讲机,可以满足应对突发环境污染事件时对通讯的要求。     

Chemical compositions and sources of atmospheric PM10 in heating, non-heating and sand periods at a coal-based city in northeastern China

Mass concentrations and chemical components (18 elements, 9 ions, organic carbon [OC] and elemental carbon [EC]) in atmospheric PM(10) were measured at five sites in Fushun during heating, non-heating and sand periods in 2006-2007. PM(10) mass concentrations varied from 62.0 to 226.3 μg m(-3), with 21% of the total samples' mass concentrations exceeding the Chinese national secondary standard value of 150 μg m(-3), mainly concentrated in heating and sand periods. Crustal elements, trace elements, water-soluble ions, OC and EC represented 20-47%, 2-9%, 13-34%, 15-34% and 13-25% of the particulate matter mass concentrations, respectively. OC and crustal elements exhibited the highest mass percentages, at 27-34% and 30-47% during heating and sand period. Local agricultural residuals burning may contribute to EC and ion concentrations, as shown by ion temporal variation and OC and EC correlation analysis. Heavy metals (Cr, Ni, Zn, Cu and Mn) from coal combustion and industrial processes should be paid attention to in heating and sand periods. The anion/cation ratios exhibited their highest values for the background site with the influence of stationary sources on its upper wind direction during the sand period. Secondary organic carbon were 1.6-21.7, 1.5-23.0, 0.4-17.0, 0.2-33.0 and 0.2-21.1 μg m(-3), accounting for 20-77%, 44-88%, 4-77%, 8-69% and 4-73% of OC for the five sampling sites ZQ, DZ, XH, WH and SK, respectively. From the temporal and spatial variation analysis of major species, coal combustion, agricultural residual burning and industrial emission including dust re-suspended from raw material storage piles were important sources for atmospheric PM(10) in Fushun at heating, non-heating and sand periods, respectively. It was confirmed by principal component analysis that coal combustion, vehicle emission, industrial activities, soil dust, cement and construction dust and biomass burning were the main sources for PM(10) in this coal-based city.     

Differences in the Spatial Distribution and Chemical Composition of PM10 Between the UK and Poland

The Fine Resolution Atmospheric Multi-pollutant Exchange Model was used to calculate the spatial distribution and chemical composition of PM₁₀ concentrations for two geographically remote countries in Europe—the UK and Poland—for the year 2007. These countries are diverse in terms of pollutant emissions as well as climate conditions. Information on the contribution of natural and anthropogenic as well as national and imported particles in total PM₁₀ concentrations in both countries is presented. The paper shows that the modelled national annual average PM₁₀ concentrations, calculated for the entire country area, are similar for the UK and Poland and close to 12 μg m^?3. Secondary inorganic aerosols dominate the total PM₁₀ concentrations in Poland. Primary particulate matter has the greatest contribution to total PM₁₀ in the UK, with large contribution of base cations. Anthropogenic sources predominate (81 %) in total PM₁₀ concentrations in Poland, whereas natural prevail in the UK—hence, the future reduction of PM₁₀ air concentrations by emissions reduction could be more difficult in the UK than in Poland.