毛细管离子色谱法测定空气中的氯化氢

以多孔玻板吸收管采样,用氢氧化钾-碳酸钠溶液吸收空气中的氯化氢(HCl),毛细管离子色谱法测定吸收液中的氯离子含量,根据采气量计算空气中的HCl含量。该方法灵敏度高,检出限低,结果准确,可避免其他阴离子及卤素和含卤酸盐离子的干扰,适用于环境空气中低含量HCl的测定。     

Cloning and expression analysis of geosmin synthase gene from Aphanizomenon gracile北大核心CSCD

Geosmin is a secondary metabolite responsible for earthy odors. The occurrence of geosmin has great impact on the quality of water environment. The gene essential for geosmin biosynthesis have been identified in several species. But little is known about the mechanism of geosmin synthesis in Aphanizomenon gracile. This study attempted to clone the gene involved in geosmin biosynthesis of Aphanizomenon gracile a nd a nalyze t he geosmin production u nder d ifferent e nvironments. T he high-efficiency thermal asymmetric interlaced PCR (hiTAIL-PCR) was used to amplify the full-length of geosmin synthase gene from Aphanizomenon gracile (WH-1). Real time PCR (RT-PCR) was applied to quantify the geosmin production in different light and temperature. As a result, geo, a geosmin synthase gene from Aphanizomenon gracile (WH-1) was cloned by hiTAIL-PCR. The full-length open reading frame (ORF) of geo was 2 262 bp, coding for a protein of 753 amino acids. Meanwhile, WH-1 was treated with different environment conditions and mRNA expression levels of geo were quantified by RT-PCR. It was found that low temperature (15 °C), high light intensity (35 μmol m-2 s-1) and continuous light illumination were beneficial to the expression of geo. The successful amplification of geosmin synthase gene verified that hiTAIL-PCR is an effective and simple procedure of low cost. The result provides fundamental knowledge on the monitoring and prevention for odorants.     

典型河谷城市儿童土壤与灰尘铅暴露风险

为定量评价河谷型城市土壤与灰尘铅对城市儿童健康的影响与风险,结合野外调查的基础上,以陕西渭河谷地典型工业城市宝鸡、西安、渭南和铜川为研究区域,以定量分析河谷型城市儿童环境铅暴露为核心,收集4个城市土壤与灰尘分析样品总计243个。利用X射线荧光光谱法测定了4个城市土壤与灰尘铅的含量;采用BCR连续形态分级法探究了城市土壤与灰尘重金属铅地球化学形态分布与迁移特征;根据US EPA污染物暴露与健康风险评价模型对城市儿童铅暴露进行了评价。研究结果表明渭河谷地典型城市宝鸡、铜川、西安和渭南城市土壤与灰尘铅浓度(X±SD)分别为(409.2±52.54)和(624.70±66.15)mg·kg-1、(357.47±41.37)和(592.60±36.78)mg·kg-1、(61.4±13.31)和(78.42±14.89)mg·kg-1、(46.71±12.11)和(64.7±13.76)mg·kg-1,均高出陕西省土壤铅背景值;污染水平依次为宝鸡铜川西安渭南。4个河谷型城市土壤与灰尘重金属铅发生整体迁移的趋势为:宝鸡城市灰尘(90.71%)西安城市灰尘(84.74%)≥宝鸡城市土壤(83.12%)渭南城市灰尘(74.89%)≥西安城市土壤(74.50%)铜川城市灰尘(72.49%)铜川城市土壤(57.50%)渭南城市土壤(53.79%)。可见,铅在均在城市灰尘中的迁移趋势远大于相应的城市土壤。4个城市土壤与灰尘均表现出较大的儿童暴露致癌风险,宝鸡和铜川城市儿童土壤与灰尘铅暴露也分别存在非致癌风险,风险程度依次为宝鸡铜川西安渭南。儿童铅暴露致癌与非致癌风险程度与其城市土壤和灰尘中铅可氧化态分布呈相似的规律,表明碱性的城市土壤与城市灰尘(p H7)中可氧化态铅可能是导致河谷型城市儿童铅暴露风险和儿童血铅污染的主要形态和因素。由此,城市燃煤排放与含铅制品的加工等活动可能是渭河谷地河谷型城市儿童血铅与铅暴露最主要的贡献源,必须采取长期有效的监测与控制措施。     

利用N-乙酰-β-D-氨基葡萄糖苷酶含量评价农药对花翅摇蚊种群发育的影响

为了进一步探索种群水平的生态风险评估方法,本文利用β-N-Acetyl-D-glucosaminidase(NAGase)的变化量来监测农药对摇蚊种群发育的影响。从花翅摇蚊Chironomus kiiensis体内分离纯化得到电泳纯的NAGase,并通过免疫大白兔制得NAGase的多克隆抗体。运用间接非竞争ELISA法检测抗体特异性,结果表明其与共同存在于水体的一些生物的NAGase的交叉反应率为隆线溞4.41%、老年低额溞3.12%、多刺裸腹溞3.40%、中华薄壳介4.17%、日本沼虾3.23%、白纹伊蚊7.50%、小球藻0.5%。运用抗体测得毒死蜱、氰戊菊酯和阿维菌素3种杀虫剂对于摇蚊NAGase释放量的12 d-EC50分别为1.2012、0.0043和0.6281μg·L-1,以NAGase活力作为测试终点,测得相应的12 d-EC50:1.4765、0.0051和0.6756μg·L-1,两者差异不显著,但均显著低于以死亡作为测试终点的12 d-LC50:4.8171、0.0954和2.1340μg·L-1,且毒力大小均为氰戊菊酯阿维菌素毒死蜱。上述结果表明,利用NAGase多克隆抗体可以特异性地检测农药对花翅摇蚊种群发育的影响。     

共存阴阳离子对针铁矿表面磷固存机制的影响研究

磷素(P)兼具重要养分元素的利和潜在面源污染的弊,其在土壤环境中的固存行为及其迁移转化过程受到广泛关注.该研究选取黄、红壤中典型矿物(针铁矿、赤铁矿及高岭石)为模式矿物,在排除pH干扰的条件下,开展了共存阴(As(V))阳(Cd(II))离子对矿物表面P(V)固存机制的影响研究.结果表明:P(V)在不同矿物表面的吸附效...     

Aerobic treatment of palm oil mill effluent

In this study treatment of palm oil mill effluent (POME) was investigated using aerobic oxidation based on an activated sludge process. The effects of sludge volume index, scum index and mixed liquor suspended solids during the acclimatizing phase and biomass build-up phase were investigated in order to ascertain the reactor stability. The efficiency of the activated sludge process was evaluated by treating anaerobically digested and diluted raw POME obtained from Golden Hope Plantations, Malaysia. The treatment of POME was carried out at a fixed biomass concentration of 3900+/-200mg/L, whereas the corresponding sludge volume index was found to be around 105+/-5mL/g. The initial studies on the efficiency of the activated sludge reactor were carried out using diluted raw POME for varying the hydraulic retention time, viz: 18, 24, 30 and 36h and influent COD concentration, viz: 1000, 2000, 3000, 4000 and 5000mg/L, respectively. The results showed that at the end of 36h of hydraulic retention time for the above said influent COD, the COD removal efficiencies were found to be 83%, 72%, 64%, 54% and 42% whereas at 24h hydraulic retention time they were 57%, 45%, 38%, 30% and 27%, respectively. The effectiveness of aerobic oxidation was also compared between anaerobically digested and diluted raw POME having corresponding CODs of 3908 and 3925mg/L, for varying hydraulic retention time, viz: 18, 24, 30, 36, 42, 48, 54 and 60h. The dissolved oxygen concentration and pH in the activated sludge reactor were found to be 1.8-2.2mg/L and 7-8.5, respectively. The scum index was found to rise from 0.5% to 1.9% during the acclimatizing phase and biomass build-up phase.     

An integrated impact assessment and weighting methodology: evaluation of the environmental consequences of computer display technology substitution

Computer display technology is currently in a state of transition, as the traditional technology of cathode ray tubes is being replaced by liquid crystal display flat-panel technology. Technology substitution and process innovation require the evaluation of the trade-offs among environmental impact, cost, and engineering performance attributes. General impact assessment methodologies, decision analysis and management tools, and optimization methods commonly used in engineering cannot efficiently address the issues needed for such evaluation. The conventional Life Cycle Assessment (LCA) process often generates results that can be subject to multiple interpretations, although the advantages of the LCA concept and framework obtain wide recognition. In the present work, the LCA concept is integrated with Quality Function Deployment (QFD), a popular industrial quality management tool, which is used as the framework for the development of our integrated model. The problem of weighting is addressed by using pairwise comparison of stakeholder preferences. Thus, this paper presents a new integrated analytical approach, Integrated Industrial Ecology Function Deployment (I2-EFD), to assess the environmental behavior of alternative technologies in correlation with their performance and economic characteristics. Computer display technology is used as the case study to further develop our methodology through the modification and integration of various quality management tools (e.g., process mapping, prioritization matrix) and statistical methods (e.g., multi-attribute analysis, cluster analysis). Life cycle thinking provides the foundation for our methodology, as we utilize a published LCA report, which stopped at the characterization step, as our starting point. Further, we evaluate the validity and feasibility of our methodology by considering uncertainty and conducting sensitivity analysis.     

藻-菌颗粒污泥中微生物胞外多糖特性研究

藻-菌颗粒污泥（Microalgal-bacterial granular sludge,MBGS）工艺在城市污水生物处理领域引起了越来越多的研究兴趣.胞外多糖（Polysaccharides,PS）是胞外聚合物（Extracellular polymeric substances,EPS）的重要组分,是维持颗粒稳定性的关键物质之一.研究了MBGS中PS的凝胶性能,以及松散结合的胞外聚合物（Loosely bound EPS,LB-EPS）和紧密结合的胞外聚合物（Tightly bound EPS,TB-EPS）中PS的含量、分布及单糖组成,并探究了MBGS的EPS中PS可能的微生物来源.结果表明,MBGS的PS具有凝胶性,主要分布在TB-EPS中,含量为 （40.06±2.30） mg·g^-1,其中半乳糖、葡萄糖和鼠李糖为主要单糖组分,而果糖和古罗糖醛酸未被检出.Thauera、Hydrogenophaga、Azoarcus和Acutodesmus是PS的主要微生物潜在来源.本文研究结果阐释了MBGS PS的基本特性,为MBGS工艺的稳定运行提供了理论基础.     

Hydrothermal-treated Pt/Al2O3 as an excellent catalyst for toluene total oxidation

The preparation of highly active supported noble metal catalysts with a low noble metal loading has always been the ultimate goal of researchers working on catalysis. Hydrothermally treated Pt/Al₂O₃ (Pt/Al₂O₃-H) exhibits better catalytic activity than that (Pt/Al₂O₃-C) treated via the conventional calcination approach. At the high space velocity of 100,000 mL/(g∙hr), the temperature that correspond to 50% toluene conversion (T₅₀) of Pt/Al₂O₃-H is 115°C lower than that of Pt/Al₂O₃-C, and the turnover frequency (TOF) value can reach 0.0756 sec⁻¹. The mechanism by which the hydrothermal approach enhances Pt/Al₂O₃ activity has been investigated. The structure associated with the high catalytic activity of Pt nanoparticles (NPs) can be retained via hydrothermal treatment. Furthermore, the support is transformed to AlO(OH) with numerous surface hydroxyl groups, which in turn can facilitate the adsorption of toluene. And the synergistic effects of Pt NPs and AlO(OH) increases the contents of Pt in oxidation state and active oxygen, which are beneficial for toluene oxidation.     

Impact of pre-oxidation on the formation of byproducts in algae-laden water disinfection: Insights from fluorescent and molecular weight

Pre-oxidation has been reported to be an effective way to remove algal cells in water, but the released algal organic matter (AOM) could be oxidized and lead to the increment in disinfection by-product (DBP) formation. The relationship between pre-oxidation and AOM-derived DBP formation needs to be approached more precisely. This study compared the impact of four pre-oxidants, ozone (O₃), chlorine dioxide (ClO₂), potassium permanganate (KMnO₄) and sodium hypochlorite (NaClO), on the formation of nitrogenous (N-) and carbonaceous (C-) DBPs in AOM chlorination. The characterization (fluorescent properties, molecular weight distribution and amino acids concentration) on AOM samples showed that the characterization properties variations after pre-oxidation were highly dependent on the oxidizing ability of oxidants. The disinfection experiments showed that O₃ increased DBP formation most significantly, which was consistent with the result of characterization properties variations. Then canonical correspondent analysis (CCA) and Pearson's correlation analysis were conducted based on the characterization data and DBP formation. CCA indicated that C-DBPs formation was highly dependent on fluorescent data. The formation of haloacetic acids (HAAs) had a positive correlation with aromatic protein-like component while trichloromethane (TCM) had a positive correlation with fulvic acid-like component. Pearson's correlation analysis showed that low molecular weight fractions were favorable to form N-DBPs. Therefore, characterization data could provide the advantages in the control of DBP formation, which further revealed that KMnO₄ and ClO₂ were better options for removing algal cells as well as limiting DBP formation.