Impact of pre-oxidation on the formation of byproducts in algae-laden water disinfection: Insights from fluorescent and molecular weight

Pre-oxidation has been reported to be an effective way to remove algal cells in water, but the released algal organic matter (AOM) could be oxidized and lead to the increment in disinfection by-product (DBP) formation. The relationship between pre-oxidation and AOM-derived DBP formation needs to be approached more precisely. This study compared the impact of four pre-oxidants, ozone (O₃), chlorine dioxide (ClO₂), potassium permanganate (KMnO₄) and sodium hypochlorite (NaClO), on the formation of nitrogenous (N-) and carbonaceous (C-) DBPs in AOM chlorination. The characterization (fluorescent properties, molecular weight distribution and amino acids concentration) on AOM samples showed that the characterization properties variations after pre-oxidation were highly dependent on the oxidizing ability of oxidants. The disinfection experiments showed that O₃ increased DBP formation most significantly, which was consistent with the result of characterization properties variations. Then canonical correspondent analysis (CCA) and Pearson's correlation analysis were conducted based on the characterization data and DBP formation. CCA indicated that C-DBPs formation was highly dependent on fluorescent data. The formation of haloacetic acids (HAAs) had a positive correlation with aromatic protein-like component while trichloromethane (TCM) had a positive correlation with fulvic acid-like component. Pearson's correlation analysis showed that low molecular weight fractions were favorable to form N-DBPs. Therefore, characterization data could provide the advantages in the control of DBP formation, which further revealed that KMnO₄ and ClO₂ were better options for removing algal cells as well as limiting DBP formation.     

The role of doped-Mn on enhancing arsenic removal by MgAl-LDHs

To meet the challenges posed by global arsenic water contamination, the MgAlMn-LDHs with extraordinary efficiency of arsenate removal was developed. In order to clarify the enhancement effect of the doped-Mn on the arsenate removal performance of the LDHs, the cluster models of the MgAlMn-LDHs and MgAl-LDHs were established and calculated by using density functional theory (DFT). The results shown that the doped-Mn can significantly change the electronic structure of the LDHs and improve its chemical activity. Compared with the MgAl-LDHs that without the doped-Mn, the HOMO-LUMO gap was smaller after doping. In addition, the -OH and Al on the laminates were also activated to improve the adsorption property of the LDHs. Besides, the doped-Mn existed as a novel active site. On the other hand, the MgAlMn-LDHs with the doped-Mn, the increased of the binding energy, as well as the decreased of the ion exchange energy of interlayer Cl⁻, making the ability to arsenate removal had been considerably elevated than the MgAl-LDHs. Furthermore, there is an obvious coordination covalent bond between arsenate and the laminates of the MgAlMn-LDHs that with the doped-Mn.     

Interactions between lead(II) ions and dissolved organic matter derived from organic fertilizers incubated in the field

This work was to study composition characteristics and the subsequent effect on the lead (Pb) binding properties of dissolved organic matter (DOM) derived from seaweed-based (SWOF) and chicken manure organic fertilizers (CMOF) during a one-year field incubation experiment using the excitation-emission matrix-parallel factor (EEM-PARAFAC) and two-dimensional correlation spectroscopy (2DCOS) analysis. Results showed that high aromatic and hydrophobic fluorescent substances were enriched in CMOF-derived DOM and SWOF-derived DOM and enhanced over time. And phenolic groups in the fulvic-like substances for SWOF-derived DOM and carboxyl groups in the humic-like substances for CMOF-derived DOM had the fastest responses over time, respectively. Moreover, both non-fluorescent polysaccharides and fluorescent humic-like substances or fulvic-like substances with aromatic (C=C) groups first participated in the binding process of Pb to SWOF-derived DOM on day 0 and 180 during the lead binding process. In contrast, humic-like substances associated with aromatic (C=C) and phenolic groups gave a faster response to Pb binding on day 360. Regarding CMOF-derived DOM, the fulvic-like substances associated with aromatic (C=C) and carboxylic groups displayed a faster response to Pb ions on day 0. Nonetheless, polysaccharides and humic-like associated with phenolic groups had a faster response on days 180 and 360. It is noteworthy that the polysaccharides, which participated in Pb binding to CMOF-derived DOM, posed a higher risk of Pb in the environment after 360 days. Therefore, these findings gave new insights into the long-term applications of commercial organic fertilizers for the amendment of soil.     

Identification and characterization of Fe3O4/peroxodisulfate advanced oxidation products from sulfameter

Sulfonamides (SAs) are one of the most widely used antibiotics and their residuals in the environment could cause some negative environmental issues. Advanced oxidation such as Fenton-like reaction has been widely applied in the treatment of SAs polluted water. Degradation rates of 95%-99.7% were achieved in this work for the tested 8 SAs, including sulfisomidine, sulfameter (SME), phthalylsulfathiazole, sulfamethoxypyridazine, sulfamonomethoxine, sulfisoxazole, sulfachloropyridazine, and sulfadimethoxine, in the Fe₃O₄/peroxodisulfate (PDS) oxidation system after the optimization of PDS concentration and pH. Meanwhile, it was found that a lot of unknown oxidation products were formed, which brought up the uncertainty of health risks to the environment, and the identification of these unknown products was critical. Therefore, SME was selected as the model compound, from which the oxidation products were never elucidated, to identify these intermediates/products. With liquid chromatography-high resolution tandem mass spectrometry (LC-HRMS/MS), 10 new products were identified, in which 2-amino-5-methoxypyrimidine (AMP) was confirmed by its standard. The investigation of the oxidation process of SME indicated that most of the products were not stable and the degradation pathways were very complicated as multiple reactions, such as oxidation of the amino group, SO₂ extrusion, and potential cross-reaction occurred simultaneously. Though most of the products were not verified due to the lack of standards, our results could be helpful in the evaluation of the treatment performance of SAs containing wastewater.     

MoS2 quantum dots based MoS2/HKUST-1 composites for the highly efficient catalytic oxidation of elementary mercury

Due to the ever-tightening regulation on mercury emission in recent decades, there is an urgent need to develop novel materials for the removal of elemental mercury at coal-fired power plants. In this study, a series of MoS₂ quantum dots (QDs)-based MoS₂/HKUST-1 composite materials were prepared. It is found that MoS₂ QDs were encapsulated by HKUST-1 and enhanced the crystallinity and specific surface area of HKUST-1. The MoS₂/HKUST-1 showed excellent performance in catalytic oxidation of Hg⁰ as compared with pristine HKUST-1. It is found that surface layer of lattice oxygens is active and participates in Hg⁰ oxidation, while the consumption of surface oxygens then leads to the formation of oxygen vacancies on the surface. These vacancies are effective in the adsorption and dissociation of O₂, which subsequently participates in the oxidation of Hg⁰. Moreover, the study on the influence of commonly seen gas components, such as SO₂, NO, NH₃ and H₂O, etc., on Hg⁰ oxidation demonstrated that synergistic effects exist among these gas species. It is found that the presence of NO promotes the oxidation of Hg⁰ using oxygen as the oxidant.     

Ozone episodes during and after the 2018 Chinese National Day holidays in Guangzhou: Implications for the control of precursor VOCs

The impact of reducing industrial emissions of volatile organic compounds (VOCs) on ozone (O₃) pollution is of wide concern particularly in highly industrialized megacities. In this study, O₃, nitrogen oxides (NOx) and VOCs were measured at an urban site in the Pearl River Delta region during the 2018 Chinese National Day Holidays and two after-holiday periods (one with ozone pollution and another without). O₃ pollution occurred throughout the 7-day holidays even industrial emissions of VOCs were passively reduced due to temporary factory shutdowns, and the toluene to benzene ratios dropped from ∼10 during non-holidays to ∼5 during the holidays. Box model (AtChem2-MCM) simulations with the input of observation data revealed that O₃ formation was all VOC-limited, and alkenes had the highest relative incremental reactivity (RIR) during the holiday and non-holiday O₃ episodes while aromatics had the highest RIR during the non-pollution period. Box model also demonstrated that even aromatics decreased proportionally to levels with near-zero contributions of industrial aromatic solvents, O₃ concentrations would only decrease by less than 20% during the holiday and non-holiday O₃ episodes and ozone pollution in the periods could not be eliminated. The results imply that controlling emissions of industrial aromatic solvents might be not enough to eliminate O₃ pollution in the region, and more attention should be paid to anthropogenic reactive alkenes. Isoprene and formaldehyde were among the top 3 species by RIRs in all the three pollution and non-pollution periods, suggesting substantial contribution to O₃ formation from biogenic VOCs.     

设施农业土壤磷素累积迁移转化及影响因素

为了科学合理施用磷肥,减小对设施农业环境带来的污染风险,以北京市大兴区设施农业集中区为研究对象,通过对不同种植年限设施农业剖面土壤(0～100 cm)磷素含量的测定分析,探究磷素累积与迁移转化特征.结果表明,设施农业表层土壤全磷和有效磷含量变化范围大,显著高于周边粮田土壤,主要跟不同种植年限农户的施磷量相关,随着土层深度的增加,全磷和有效磷含量逐渐减小,呈现表聚特征,其中土壤ω(全磷)范围在0.38～2.58 g·kg^-1,ω(有效磷)范围在1.60～256.00 mg·kg^-1.随着种植年限的增加,土壤全磷和有效磷含量呈现先增加后减小的趋势,在15 a左右达到峰值,随后逐渐减少,趋于稳定,总体处于较高水平.无机磷主要集中在设施农业表层土壤,其中Ca-P占无机磷的比例最大,达到了98.38%,Ca₁₀-P是最主要的Ca-P形态,含量占Ca-P的78.70%,Ca₂-P占比最小,仅占9.50%.不同形态无机磷含量呈现表层土壤富集,向下减少的垂直分布特征;不同土层深度,不同形态无机磷占全磷比例变化存在差...     

中频熔炼炉测温仪电磁兼容设计与研究

中频熔炼炉测温仪工作在较强电磁场的环境中,对其电磁兼容设计是十分必要的。首先介绍了测温仪的抗干扰总体设计原理,给出了产生电磁干扰因素,提出了测温仪的各种抗电磁干扰措施,如屏蔽技术、接地与滤波技术等。实践表明,以上的各种措施提高了中频熔炼炉测温仪的电磁兼容性能。     

基于突变级数法的武汉市农地利用绩效评价及影响因素分析

根据突变级数法基本原理,对武汉市2002-2011年农地利用绩效动态变化情况进行分析,并利用障碍度模型找出影响其绩效水平的主要障碍因子.研究结果表明,研究时段内武汉市农地利用绩效整体呈上升趋势,且带有明显的阶段性特征;经济绩效是影响农地利用绩效的最主要障碍因素;从单项指标来看,随着生态理念的不断深化,未来农地利用程度及资源安全将对农地利用绩效产生较大影响.     

Development of pretreatment protocol for DNA extraction from biofilm attached to biologic activated carbon (BAC) granules

The biologic activated carbon (BAC) process is widely used in drinking water treatments. A comprehensive molecular analysis of the microbial community structure provides very helpful data to improve the reactor performance. However, the bottleneck of deoxyribonucleic acid (DNA) extraction from BAC attached biofilm has to be solved since the conventional procedure was unsuccessful due to firm biomass attachment and adsorption capacity of the BAC granules. In this study, five pretreatments were compared, and adding skim milk followed by ultrasonic vibration was proven to be the optimal choice. This protocol was further tested using the vertical BAC samples from the full-scale biofilter of Pinghu Water Plant. The results showed the DNAyielded a range of 40 μg·g⁻¹ BAC (dry weight) to over 100 μg·g⁻¹ BAC (dry weight), which were consistent with the biomass distribution. All results suggested that the final protocol could produce qualified genomic DNA as a template from the BAC filter for downstream molecular biology researches.