Sewage sludge disintegration by high-pressure homogenization: A sludge disintegration model

High-pressure homogenization (HPH) technology was applied as a pretreatment to disintegrate sewage sludge. The effects of homogenization pressure, homogenization cycle number, and total solid content on sludge disintegration were investigated. The sludge disintegration degree (DDCOD), protein concentration, and polysaccharide concentration increased with the increase of homogenization pressure and homogenization cycle number, and decreased with the increase of sludge total solid (TS) content. The maximum DDCOD of 43.94% was achieved at 80 MPa with four homogenization cycles for a 9.58 g/L TS sludge sample. A HPH sludge disintegration model of DD_COD= kN^aP^b was established by multivariable linear regression to quantify the effects of homogenization parameters. The homogenization cycle exponent a and homogenization pressure exponent b were 0.4763 and 0.7324 respectively, showing that the effect of homogenization pressure (P) was more significant than that of homogenization cycle number (N). The value of the rate constant k decreased with the increase of sludge total solid content. The specific energy consumption increased with the increment of sludge disintegration efficiency. Lower specific energy consumption was required for higher total solid content sludge.     

Degradation of pyrene by immobilized microorganisms in saline-alkaline soil

Biodegradation of polycyclic aromatic hydrocarbons (PAHs) is very difficult in saline-alkaline soil due to the inhibition of microbial growth under saline-alkaline stress. The microorganisms that can most effectively degrade PAHs were screened by introducing microorganisms immobilized on farm byproducts and assessing the validity of the immobilizing technique for PAHs degradation in pyrene-contaminated saline-alkaline soil. Among the microorganisms examined, it was found that Mycobacterium sp. B2 is the best, and can degrade 82.2% and 83.2% of pyrene for free and immobilized cells after 30 days of incubation. The immobilization technique could increase the degradation of pyrene significantly, especially for fungi. The degradation of pyrene by the immobilized microorganisms Mucor sp. F2, fungal consortium MF and co-cultures of MB+MF was increased by 161.7% (P < 0.05), 60.1% (P < 0.05) and 59.6% (P < 0.05) after 30 days, respectively, when compared with free F2, MF and MB+MF. Scanning electron micrographs of the immobilized microstructure proved the positive effects of the immobilized microbial technique on pyrene remediation in saline-alkaline soil, as the interspace of the carrier material structure was relatively large, providing enough space for cell growth. Co-cultures of different bacterial and fungal species showed different abilities to degrade PAHs. The present study suggests that Mycobacterium sp. B2 can be employed for in situ bioremediation of PAHs in saline-alkaline soil, and immobilization of fungi on farm byproducts and nutrients as carriers will enhance fungus PAH-degradation ability in saline-alkaline soil.     

基于PCR-TGGE技术的餐厨垃圾厌氧消化微生物群落结构解析

为了解不同负荷下单相餐厨垃圾厌氧消化反应器内微生物群落结构演替特征,在单相厌氧消化反应器负荷为2.0～8.5kg·m-·3d-1(以VS计)的不同负荷条件下取样,运用16SrDNA的PCR-TGGE技术对反应器内微生物进行动态追踪.同时,运用Dice系统和NMDS软件对PCR-TGGE图谱进行分析.结果表明,负荷为4.0～6.0kg·m-·3d-1时,微生物群落结构变化不大;负荷为6.0～7.0kg·m-·3d-1时,微生物群落结构变化较为明显;负荷分别为7.0～8.0kg·m-·3d-1及8.5kg·m-·3d-1时,微生物群落结构变化最为明显.纵观整个过程,在餐厨垃圾厌氧消化反应器有机负荷在2.0～8.5kg·m-·3d-1下厌氧反应器内的微生物群落结构存在明显的阶段性演替;负荷为7.0kg·m-·3d-1时微生物群落结构的丰富度最好.     

锚定金属离子-螯合物的介孔硅除磷性能研究

采用3种介孔硅分子筛制备了锚定金属离子-螯合物的介孔硅吸附剂。系统研究了硅分子筛、螯合剂、金属离子和吸附时间等因素对吸附剂磷吸附性能的影响。结果表明,硅分子筛、螯合物和金属离子对吸附剂的磷吸附性能有显著的影响,其对介孔硅吸附剂磷吸附量影响的顺序分别为:SBA15>MCM41>MCM48,Fe-SH-MCM41<相似文献   

养殖废水新型处理技术中试

针对畜禽养殖污染废水传统处理方法效率不高、噪声较大等缺点进行改进,采用"水解酸化池-塔式膜生物反应器-悬浮澄清池"工艺进行处理,结果表明:COD、氨氮去除率分别为97.5%和91%,出水水质可达GB 18596—2001《畜禽养殖污染物排放标准》。     

超声波/零价铁协同体系作用机理探讨

在超声波/零价铁协同体系中,探讨了OH.的产生途径及其影响因素,并分析了Fe0表面形态变化。结果表明:在超声波/零价铁体系中,羟基自由基的产生途径主要有四种:声空化导致水分子热解、Fenton反应、超声波与类Fenton反应的复合效应、铁粉颗粒效应;pH值过低或过高都不利于羟基自由基产生;当铁粉投加量为2.0g/L时最有利于羟基自由基产生;超声波通过冲刷、碎裂、清洗、气蚀和熔合等多种效应,活化和增强铁粉的表面性能。     

节能型虹吸式滗水器的设计与应用

详细介绍了虹吸式滗水器的构成、特点及工作原理,结合理论和实践经验给出了虹吸式滗水器的设计、计算方法及关键设计参数,提出了常规使用方法,整套设备的设计全面而简单明了。     

基于高铁酸钾同步氧化-絮凝技术在污水处理中的研究进展

Fe(Ⅵ)具有较高的氧化还原电位,Fe(OH)3具有良好的絮凝效果,废水处理中高铁酸钾发挥同步氧化和絮凝作用。介绍高铁酸钾处理各种难降解废水的机理,同时分析高铁酸钾投加量、pH、反应温度、反应时间等因素对各种废水去除效果的影响。并提出基于高铁酸钾同步氧化絮凝技术处理污水的局限性和未来的发展方向。     

大肠杆菌IscA膜表面表达菌株在吸附水体重金属中的应用

为构建一种能够高效、同时吸附水中多种重金属离子的大肠杆菌,利用融合蛋白表达技术,首先将大肠杆菌前脂蛋白信号肽Lpp、膜蛋白OmpA的N端部分氨基酸和铁硫簇组装蛋白IscA的编码基因序列进行融合,构建pET-Lpp-OmpA-IscA表达载体,将此载体导入大肠杆菌BL21菌株.在IPTG诱导下,IscA蛋白可表达于细胞膜表面.然后对IscA膜表面表达菌株对重金属的吸附能力进行评估,包括测定最大吸附容量、绘制吸附浓度依赖曲线和时间依赖曲线,以及对菌株清除工业污水中重金属的性能进行初步探索.研究结果表明,与本底对照菌株相比,IscA蛋白在细胞膜表面表达能够使菌株对水中的Cu~(2+)、Ni~(2+)、Cd~(2+)、Pb~(2+)、As~(3+)、Co~(2+)、Hg~(2+)这7种重金属的吸附能力提高2～5倍不等,并且在pH为6～8范围内保持其吸附能力基本不变.此菌株能够在30 min内将各种重金属溶液中超标5倍的金属含量降低至最大允许排放浓度以下,并且对吸附的重金属具有不同程度的回收能力和菌株再生能力.此外,该菌株能够同时吸附工业污水中的多种重金属,有效降低各种重金属含量.因此,利用膜表面表达技术对大肠杆菌进行改造,成功提高了大肠杆菌对多种重金属的吸附能力,为利用微生物治理环境重金属污染提供了良好的应用前景.     

国家干线公路移动源VOCs排放及臭氧生成潜势研究

基于国家干线公路4346个交通监测站日平均监测数据,采用移动源VOCs测算方法,建立国家干线移动源VOCs排放清单,使用最大增量反应活性（MIR）估算VOCs的臭氧生成潜势（OFP）,并通过动态分段技术和核密度估计方法对臭氧生成强度的空间特征进行分析.结果表明,客车是国家干线移动源VOCs年排放量最大的源,占客货总排放量70.50%;广东省年排放量最大,占全国干线公路VOCs排放量的10.7%;G15沈海高速年排放量最大,占全国干线公路VOCs排放量的5.4%.烯烃和芳香烃为移动源OFP主要的贡献者,前十种有机污染物占干线移动源总OFP的67.29%.从客货车日均OFP强度上来看,受车流量影响,各干线差异明显.北京天津呈团簇状集聚,至石家庄一线为带状分布;济南淄博潍坊青岛一线呈弯月带状分布;南京苏州上海杭州呈团状,至上海又集聚;粤港澳大湾区以深圳为中心高度聚集;沈阳、郑州、西安、武汉、重庆等交通枢纽出现次一级强度集聚.