A landscape vulnerability analysis method proposal and its integration in the EIA

Landscape is the area primarily affected by proposed human projects. The prediction and evaluation of the potential anthropogenic impacts under Environmental Impact Assessment (EIA) is therefore one of the major environmental tools for prevention of any deteriorative or destructive actions. To conduct EIA properly requires inclusion of a determination of landscape vulnerability which expresses the possible landscape reaction to impacts of any exogenous factors. When it is designated correctly, the suitable human activities are determined more accurately. Even though many techniques for this have been suggested worldwide, lots of deficiencies have surfaced in their application. This paper presents a method for landscape vulnerability analysis which consists of qualitative evaluation of landscape receptors, their scoring, the vulnerability degree calculation, and overall reliability evaluation. The method proposed can improve the impact objectivity of prediction and evaluation and the suggestion of precise mitigation measures with the purpose of achieving sustainable landscape management.     

Exposure patterns of UV filters, fragrances, parabens, phthalates, organochlor pesticides, PBDEs, and PCBs in human milk: correlation of UV filters with use of cosmetics

In order to assess potential risks of exposure to environmental chemicals, more information on concomitant exposure to different chemicals is needed. We present data on chemicals in human milk of a cohort study (2004, 2005, 2006) of 54 mother/child pairs, where for the first time, cosmetic UV filters, synthetic musks, parabens and phthalate metabolites were analyzed in the same sample along with persistent organochlor pollutants (POPs), i.e., organochlor pesticides and metabolites, polybrominated diphenylethers and polychlorinated biphenyls (PCBs). The two groups of chemicals exhibited different exposure patterns. Six out of seven PCB congeners and a majority of pesticides were present in all milk samples, with significant correlations between certain PCB congener and pesticide levels, whereas the cosmetic-derived compounds, UV filters, parabens and synthetic musks, exhibited a more variable exposure pattern with inter-individual differences. UV filters were present in 85.2% of milk samples, in the range of PCB levels. Comparison with a questionnaire revealed a significant correlation between use of products containing UV filters and their presence in milk for two frequently used and detected UV filters, 4-methylbenzylidene camphor and octocrylene, and for the whole group of UV filters. Concentrations of PCBs and organochlor pesticides were within ranges seen in Western and Southern European countries. For several POPs, mean and/or maximum daily intake calculated from individual concentrations was above recent US EPA reference dose values. Our data emphasize the need for analyses of complex mixtures to obtain more information on inter-individual and temporal variability of human exposure to different types of chemicals.     

Geographical location and key sensitivity issues of post-industrial regions in Europe

Primary objectives of our work were to spatially delineate post industrial areas of the EU-27 and indicate key environmental, social and economic sensitivity issues for these regions. The density of industrial sites within NUTS-x regions for EU-27 countries was assessed by using CORINE 2000 land cover layer. A development of postindustrial society in Europe represents a strong geographic diversity. There are distinct historical and current differences between regions which form major groups, comprising similar internal characteristics and definable trends in environmental and socioeconomic sense. Regions grouped into postindustrial clusters are fundamentally different from the European average, and are facing specific problems related to global market and political changes. Eastern postindustrial regions can be characterized as socially and economically weak, exhibiting high unemployment rate, low GDP, negative population growth and a strong environmental pressure, represented by a high density of dump sites. Most of the western EU postindustrial areas have been successfully recovered and moved into new economy as shown by most of the indicators. In urban postindustrial zones, however, emission sources of pollutants seem to continually be a major problem--not necessarily in terms of exceeding thresholds, but through a remarkable difference in the amount of pollutants produced relative to other regions.     

Application of physicochemical data for water-quality assessment of watercourses in the Gdansk Municipality (South Baltic coast)

The paper presents water-quality evaluation based on an 8-year monitoring programme in the Gdansk Municipality region, on the Southern coast of the Baltic Sea. The studies were carried out from 2000 to 2007 by surface water analysis at 15 various sites within eight watercourses. Sampling sites included rather urbanized or developed lands, farming fields and non-polluted city recreational areas such as parks and forests. Most of the watercourses were sampled monthly at two locations, one within the upper course of the watercourse and the other near its mouth. In all samples, eight parameters of water quality were determined: total suspended solids, dissolved oxygen, water temperature, oxygen saturation, 5-day biochemical oxygen demand, chemical oxygen demand, total phosphorus and total nitrogen concentration. Interpretation of the obtained results revealed that examination of those basic physicochemical parameters permits to discriminate initially watercourses with respect to level of water contamination. During the research, a large dataset was obtained and it was described by both basic statistical parameters and chemometric method of cluster analysis. The paper presents relations between analysed parameters and influence of land exploitation mode on water quality and describes variation of the results both in space and time.     

Real-time wet scavenging of major chemical constituents of aerosols and role of rain intensity in Indian region

Real-time simultaneous studies on chemical characteristics of rainwater and PM₁₀ aerosols were carried out to understand the scavenging of major chemical components in Indian region. The concentrations of Ca²⁺, NH₄⁺, SO₄²⁻ and NO₃⁻ were observed to be lower in the aerosol samples collected during rain as compared to before and after rain events. The most significant reduction was noticed for Ca²⁺ (74%) during rain which showed highest scavenging ratio (SR) and indicated that below-cloud scavenging is an effective removal process for Ca²⁺ in Indian region. Among non-sea salt components, Ca²⁺ had highest SR at Hyderabad indicating typical characteristics of crustal influence as abundance of calcium carbonate in soil dust has been reported in India. However, the levels of these major chemical components gradually got build-up in due course of time. After rain events, the levels of SO₄²⁻ aerosols were noticed to be substantially higher (more than double) within 24 h. In general, scavenging ratios for all components (except Ca²⁺, NH₄⁺ and K⁺) were higher over BOB as compared to Hyderabad. The maximum fall in aerosol levels (BR minus AR) was observed during continuous and low intensity rain events that did not allow building up of aerosol concentrations.     

Impact of alternative metrics on estimates of extent of occurrence for extinction risk assessment

In International Union for Conservation of Nature (IUCN) Red List assessments, extent of occurrence (EOO) is a key measure of extinction risk. However, the way assessors estimate EOO from maps of species’ distributions is inconsistent among assessments of different species and among major taxonomic groups. Assessors often estimate EOO from the area of mapped distribution, but these maps often exclude areas that are not habitat in idiosyncratic ways and are not created at the same spatial resolutions. We assessed the impact on extinction risk categories of applying different methods (minimum convex polygon, alpha hull) for estimating EOO for 21,763 species of mammals, birds, and amphibians. Overall, the percentage of threatened species requiring down listing to a lower category of threat (taking into account other Red List criteria under which they qualified) spanned 11–13% for all species combined (14–15% for mammals, 7–8% for birds, and 12–15% for amphibians). These down listings resulted from larger estimates of EOO and depended on the EOO calculation method. Using birds as an example, we found that 14% of threatened and near threatened species could require down listing based on the minimum convex polygon (MCP) approach, an approach that is now recommended by IUCN. Other metrics (such as alpha hull) had marginally smaller impacts. Our results suggest that uniformly applying the MCP approach may lead to a one‐time down listing of hundreds of species but ultimately ensure consistency across assessments and realign the calculation of EOO with the theoretical basis on which the metric was founded.     

Inventory of marine biotest methods for the evaluation of dredged material and sediments

An inventory of marine biotest methods for the evaluation of dredged material and sediments was compiled on behalf of the Federal Environmental Agency of Germany. Relevant assays were identified from the literature and experts from several countries contributed to a questionnaire survey on established and developing procedures. The biotest methods are applicable to whole sediment, sediment suspension, sediment elutriate, porewater and/or sediment extract. The endpoints cover acute and long-term toxicity, bioaccumulation, endocrine effects, toxic effects on reproduction, carcinogenicity and mutagenicity. Comparative analyses and evaluation of the biotest methods were conducted with regard to their sensitivity, specificity, applicability (regional specificity, availability and suitability of the test organisms), variability (physicochemical factors, natural factors and factors related to sampling and testing), cost-effectiveness, aspects of animal ethics, standardization (guidelines, intercalibration) and application for monitoring purposes in the areas of the OSPAR and Helsinki Conventions. The available information was integrated to rate the validity of the methods, their relevance for assessing impacts on ecosystems and the suitability of the methods for the evaluation of marine sediments and dredged material. Based on the rating of the individual bioassays, a tiered testing is suggested in a hierarchical approach representing a variety in taxa, biological processes and exposure routes, thereby covering the cellular, species, population and community level with a wide discriminatory and sensitivity range. The toxicological significance and complexity increases with the tiers: (1) screening and detection of impacts, (2) characterization of toxic effects, (3) verification of in situ alterations.     

Polychlorinated naphthalenes in sediments from the industrial region of Bitterfeld

Bitterfeld (Germany) was a major site of chemical production in the former German Democratic Republic with chloralkali electrolysis as the basic process. Effluents were dumped via the creek Spittelwasser into the rivers Mulde and Elbe. Despite the fact that the chloralkali industry is known as a possible source of polychlorinated naphthalenes (PCNs), to date no data about PCN pollution in the region of Bitterfeld and downstream regions are available. Therefore, sediments of the creek Spittelwasser were isomer-specifically analysed for penta-, hexa- and heptachlorinated naphthalenes using GC/MS. Concentrations of 880, 543 and 1120 ng/g dry weight were found, respectively. The isomer pattern suggests chloralkali industry as the major source of PCN contamination. Because of their toxicological relevance we suggest to include PCNs into monitoring and risk assessment programs of the rivers Mulde and Elbe downstream of Bitterfeld.