Spatial and temporal variation in suspended sediment, organic matter, and turbidity in a Minnesota prairie river: implications for TMDLs

The Minnesota River Basin (MRB), situated in the prairie pothole region of the Upper Midwest, contributes excessive sediment and nutrient loads to the Upper Mississippi River. Over 330 stream channels in the MRB are listed as impaired by the Minnesota Pollution Control Agency, with turbidity levels exceeding water quality standards in much of the basin. Addressing turbidity impairment requires an understanding of pollutant sources that drive turbidity, which was the focus of this study. Suspended volatile solids (SVS), total suspended solids (TSS), and turbidity were measured over two sampling seasons at ten monitoring stations in Elm Creek, a turbidity impaired tributary in the MRB. Turbidity levels exceeded the Minnesota standard of 25 nephelometric units in 73% of Elm Creek samples. Turbidity and TSS were correlated (r ²?=?0.76), yet they varied with discharge and season. High levels of turbidity occurred during periods of high stream flow (May–June) because of excessive suspended inorganic sediment from watershed runoff, stream bank, and channel contributions. Both turbidity and TSS increased exponentially downstream with increasing stream power, bank height, and bluff erosion. However, organic matter discharged from wetlands and eutrophic lakes elevated SVS levels and stream turbidity in late summer when flows were low. SVS concentrations reached maxima at lake outlets (50 mg/l) in August. Relying on turbidity measurements alone fails to identify the cause of water quality impairment whether from suspended inorganic sediment or organic matter. Therefore, developing mitigation measures requires monitoring of both TSS and SVS from upstream to downstream reaches.     

Experience with the use of LCA-modelling (EASEWASTE) in waste management.

Life-cycle assessment (LCA) models are becoming the principal decision support tools of waste management systems. This paper describes our experience with the use of EASEWASTE (Environmental Assessment of Solid Waste Systems and Technologies), a new computerized LCA-based model for integrated waste management. Our findings provide a quantitative understanding of waste management systems and may reveal consistent approaches to improve their environmental performances. EASEWASTE provides a versatile system modelling facility combined with a complete life-cycle impact assessment and in addition to the traditional impact categories addresses toxicity-related categories. New categories dealing with stored ecotoxicity and spoiled groundwater resources have been introduced. EASEWASTE has been applied in several studies, including full-scale assessments of waste management in Danish municipalities. These studies led to numerous modelling issues: the need of combining process-specific and input-specific emissions, the choice of a meaningful time horizon, the way of accounting for biological carbon emissions, the problem of stored ecotoxicity and aspects of crediting the waste management system with the savings inherent in avoided production of energy and materials. Interpretation of results showed that waste management systems can be designed in an environmentally sustainable manner where energy recovery processes lead to substantial avoidance of emissions and savings of resources.     

Environmental assessment of ester-based lubricants after application

GOAL, SCOPE AND BACKGROUND: Lubricants based on renewable resources are an environmentally friendly alternative to petrochemical products due to their better ecotoxicological performance and their excellent biodegradability. To improve the technical performance of lubricants, and to reduce friction and wear, the use of additives is nowadays obligatory. The collaborative research center SFB 442 aims at developing environmentally acceptable lubricants that facilitate the avoidance of these additives by transferring their function to suitable coatings. For a complete assessment of the ecological performance of these newly developed lubricants, the whole life cycle including production, application as well as disposal and fate in the environment is studied. In the following study the focus was on the application and its influence on the environmental behavior of the lubricant. The application of lubricants leads, among other things, to the intake of metals due to abrasion from tools, work pieces or mechanical components. Previous examinations indicated a possible influence of metals on the toxicity of eluates prepared from used lubricants (Erlenkaemper et al. 2005). To clarify if the apparent toxicity of used lubricants solely results from the intake of metals, the extractability of these metals from the oil matrix is determined. By combining chemical analyses with bioassays, the bioavailability of metals that are present in the extract is estimated. To further investigate the relevance of metals on toxicity, toxic units (TU) were calculated and related to the results of the bioassays. Interactions between the metals were investigated with aqueous mixtures of metal chlorides and calculations based on the concept of concentration addition and independent action. METHODS: A lubricant mixture was applied to a tribological test bench that simulates real conditions of use and extremely short time load, respectively. Samples were taken at particular times, water soluble fractions (WSF) of these fluids were prepared and dilution series were investigated in several bioassays. Concentration of metals and total organic carbon (TOC) were determined in the eluates. TUs were calculated according to Sprague (1970) and mixture toxicity was calculated according to the concept of concentration addition (Loewe and Muischnek 1926) and independent action (Bliss 1939). RESULTS: Analyses of the metal content of the lubricant and the eluates clearly revealed the availability of the metals in the aqueous extracts. Especially copper, zinc, nickel and chromium were found and their concentrations increased during the time of use. The water extractable fraction, e.g., of copper, rose from 8.8% to 45.3% of the total content in the lubricant after 33.5 hours of use. Tests performed with the algal growth inhibition assay and the luminescence inhibition assay revealed the uptake or absorption by the organisms and, thus, the bioavailability of the metals. The calculation of TUs partly indicated a possible influence of the metals on ecotoxicity of the eluates. Copper reached concentrations equal to or higher than the EC50 value of copper chloride in the growth inhibition assays with algae and Ps. putida as well in the immobilization assay with daphnids. TUs for copper are also larger than 1 for the algal growth inhibition assay. The EL50 values indicated that the luminescence inhibition assay was the most sensitive test system, with values between 4.7% and 9.6%. While the toxicity towards algae and V. fischeri in the growth inhibition assay decreased until both organisms were no longer influenced by the exposure, the EL50 values for the D. magna immobilization assay and the Ps. putida growth inhibition assay decreased with the progressing use of the lubricant. The tested metal salt mixtures showed that Ps. putida, algae and daphnids are the most sensitive organisms with EC50 values below 1 mg/l. DISCUSSION: Although the intake of metals mainly occurred via abrasion of particles, the results revealed the availability of these metals in water. The availability varied for each of the four metals. For both the algal growth inhibition assay and the luminescence inhibition assay, an uptake or absorption of the metals could be demonstrated. The calculated TUs indicated an effect in some bioassays that was not verified in the test itself. The influence of copper on V. fischeri, for example, was not confirmed while the EL50 values for the daphnid bioassay decreased, meaning that the eluates became more toxic with progressing use of the lubricant. The calculations of mixture toxicity based on the concept of concentration addition demonstrated good correlations with the tested metal mixtures, but also a different sensitivity of the organisms. CONCLUSIONS: The results presented here reveal the availability of those metals in water that were taken in during the use of the lubricant in a tribological test bench and, thus, have the possibility of interacting with the organisms. The availability of the metals in the bioassays was proven by chemical analyses. The calculation of TUs and the corresponding EL50 values, however, indicate different availabilities of the metals. The results of the metal salt mixtures show good correlations with calculations of mixture toxicity based on concentration addition. Moreover, the varying sensitivity of the organisms when exposed to eluates or metal mixtures indicates a different bioavailability of the metals and/or the presence of other compounds that exert toxic action. RECOMMENDATIONS AND PERSPECTIVES: For further investigations, the organic oil matrix and its influence on the toxicity have to be taken into account. The toxicity of the eluates may not only be due to metals; additional effects could arise from changes in the lubricant itself.     

Ammonia emissions from a broiler farm: spatial variability of airborne concentrations in the vicinity and impact on adjacent woodland

Agricultural NH₃ emissions affect air quality and influence the nitrogen cycle. In the subject study, NH₃ emissions from a broiler farm and the resulting atmospheric concentrations in the immediate vicinity during three growing cycles have been quantified. Additionally, vegetation along a transect in an adjacent woodland was analysed. The emissions were as high as 10 kg NH₃ h⁻¹ and the atmospheric concentrations ranged between 33 and 124 μg NH₃ m⁻³ per week in the immediate vicinity. Measurements of the atmospheric concentrations over 7 weeks showed a substantial decline of mean concentrations (based on a 3-week average) from ∼13 to <3 μg NH₃ m⁻³, at 45- and 415-m distance from the farm. Vegetation surveys showed that nitrophilous species flourished when they grew closest to the farm (their occurrence sank proportionately with distance). A clearly visible damage of pine trees was observed within 200 m of the farm; this illustrated the significant impact of NH₃ emissions from agricultural sources on the sensitive ecosystem.     

Chemical characterization of landfill leachates--400 parameters and compounds

A large number of hazardous compounds can be expected to be present in landfill leachates, many of which have not yet been identified. Thus this study screened samples from 12 Swedish municipal landfill sites for 400 parameters and compounds. More than 90 organic and metal organic compounds and 50 inorganic elements were detected, some of which seem to have not been detected before. Compounds detected include halogenated aliphatic compounds, benzene and alkylated benzenes, phenol and alkylated phenols, ethoxylates, polycyclic aromatic compounds, phthalic esters, chlorinated benzenes, chlorinated phenols, PCB, chlorinated dioxins and chlorinated furans, bromated flame-retardants, pesticides, organic tin, methyl mercury and heavy metals. The presence of this large number of hazardous compounds in landfill leachates should have a significant impact on future landfill risk assessments and the development of leachate treatment methods. We propose that future research should pay more attention to the metal-organic and organic compounds detected in this study. We also suggest using leachate sediments as a matrix for detecting hydrophobic compounds, and reflecting on the degradation phase when evaluating results from monitoring studies. The extensive compilation of compounds in this paper can be used to select compounds to search for in future studies.     

Nonparasitic Nematoda provide evidence for a linear response of functionally important soil biota to increasing livestock density

Soil acidity, nutrient availability and livestock density have a major influence on the belowground ecological community. As fast decomposition rates are due mostly to bacterial-based pathways and slower decomposition rates mostly to fungal-based pathways, it is helpful to condense empirical information in the so-called Nematode Channel Ratio (NCR). The NCR is shown to be a good indicator of efficiency in soil decomposition processes. We argue that in intensive agroecosystems, other fungivore members of the decomposer food web may outcompete the hyphal-feeding nematodes. We demonstrate how the NCR can be used to set ecological standards for sustainable use of the soil in agroecosystems. To summarize the interactions between the microbial resources and the decomposer nematofauna according to increasing land management, we propose the use of the fifth percentile as proxy for a sustainable environmental quality of grasslands on sandy soils, and the NCR mean as the upper threshold for low-stocked farms.     

经验正交函数方法和TRMM数据对长江流域降水模式与极端水文过程的研究

气候变化加剧了极端天气和水文事件的发生,降水是区域干旱与洪水事件最直接驱动因素。以TRMM/PR月累积降水反演遥感数据为基础,利用经验正交函数EOF（Empirical Orthogonal Function）方法对长江流域降水时空变化模式进行提取,并对比分析了主要模式振幅强弱与极端水文事件的对应关系。结果表明在流域尺度上EOF方法及TRMM/PR数据可以较好地识别降水主要模式,通过时空尺度变换成功揭示主要降水模式强弱与流域极端水文事件的对应关系。鉴于日益丰富的巨量水文气象时空数据,EOF方法在模式提取、水文模拟、极端事件预估及灾害适应性研究等方面具有应用潜力     

Modeling of Potential Power Plant Plume Impacts on Dallas-Fort Worth Visibility

ABSTRACT

During wintertime, haze episodes occur in the Dallas-Ft. Worth (DFW) urban area. Such episodes are characterized by substantial light scattering by particles and relatively low absorption, leading to so-called “white haze.” The objective of this work was to assess whether reductions in the emissions of SO₂ from specific coal-fired power plants located over 100 km from DFW could lead to a discernible change in the DFW white haze. To that end, the transport, dispersion, deposition, and chemistry of the plume of a major power plant were simulated using a reactive plume model (ROME). The realism of the plume model simulations was tested by comparing model calculations of plume concentrations with aircraft data of SF₆ tracer concentrations and ozone concentrations. A second-order closure dispersion algorithm was shown to perform better than a first-order closure algorithm and the empirical Pasquill-Gifford-Turner algorithm. For plume impact assessment, three actual scenarios were simulated, two with clear-sky conditions and one with the presence of fog prior to the haze. The largest amount of sulfate formation was obtained for the fog episode. Therefore, a hypothetical scenario was constructed using the meteorological conditions of the fog episode with input data values adjusted to be more conducive to sulfate formation. The results of the simulations suggest that reductions in the power plant emissions lead to less than proportional reductions in sulfate concentrations in DFW for the fog scenario. Calculations of the associated effects on light scattering using Mie theory suggest that reduction in total (plume + ambient) light extinction of less than 13% would be obtained with a 44% reduction in emissions of SO₂ from the modeled power plant.     

The role of parental behaviour for the development of behaviour specific environmental norms – The example of recycling and re-use behaviour

Based on the norm activation theory we developed assumptions about how parents may influence specific pro-environmental behaviours (i.e. re-use of paper and recycling) of their children (age 8–10). A sample of 206 parent-child-dyads were investigated using questionnaires recording norm activation model variables for children (i.e. awareness of need, awareness of consequences, personal norm, subjective norm, pro-environmental behaviour), as well as communication behaviour and actual behaviour of parents. For both behaviours (re-use and recycling) two separate structural equation models were tested (N = 206 and N = 194). Model fit statistics indicate a good fit of empirical data and model structure for both behaviours, supporting our assumption that the norm activation model can be applied to pro-environmental behaviour of young children. Communication behaviour of parents had a different influence on the two respective behaviours. While parents seemed to influence their children's recycling behaviour via sanctions and their own behaviour, re-use of paper was mainly influenced via communication of problem knowledge.