Development and validation of methods for environmental monitoring of cyclophosphamide in workplaces

Methods to monitor contamination of workplaces with antineoplastic drugs have been developed and validated. Cyclophosphamide (CP) was used as a model compound as it is one of the most commonly used antineoplastic drugs. A wipe sampling method to detect contamination with CP at surfaces was developed. A personal air sampling method to sample gas and vapour on solid sorbent tubes and particles with filters was also developed. Wipe and filter samples were extracted and sorbent samples were eluted, all with ethyl acetate. The samples were analysed with liquid chromatography tandem mass spectrometry. (2)H(6)-labelled cyclophosphamide was used as an internal standard. The between-day precision was 2-5% for wipe samples, 4-6% for sorbent samples and 3-8% for filter samples. The limit of detection was 0.02 ng CP per sample for the wipe and filter methods and 0.03 ng CP per sample for the solid sorbent method. Wipe sampling on surfaces made of different materials resulted in mean recoveries between 78-106%. The desorption recovery was between 97-102% for the wipe samples, 97% for the sorbent samples and 101% for the filter samples. Samples were stable for up to 2 months at 5 degrees C and -20 degrees C and for about 2 d at room temperature. The developed methods were applied to the measurement of contamination with CP in a hospital pharmacy. Trace amounts of CP, 1.3 and 1.4 ng, were detected on surfaces in the pharmacy.     

水体中重要污染元素化学形态分析研究方法及其进展

概述了元素化学形态分析的意义、概念和范围，元素化学形态分析与模拟计算方法，并分别对某些重要元素的化学形态分析方法的进展作了综述，介绍了１１５篇文献。     

The Influence of pH on Mobility of Heavy Metals from Municipal Solid Waste Incinerator Fly Ash

Incineration has become one of the principal methods for municipal solid waste disposal particularly in all large cities throughout the world. Currently, the municipal solid waste incinerator fly ashes (MSWIF) are disposed of by landfill. The metal speciation of cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), and zinc (Zn) in MSWIF after been extracted with water at different pH values were examined using a sequential extraction procedure. The extraction sequence was as follows: (1) Exchangeable (NaOAc, pH 8.2), (2) Bound to Carbonates (NaOAc, pH 5.0), (3) Bound to metal oxides (HONH3Cl), (4) Bound to organic matters (HNO3, H2O2), and (5) Residual (HNO3, HCl, H2O2, HF, 1:3:1:3). The heavy metal contents in the extraction solutions were determined by inductively coupled plasma atomic emission spectrometry. The heavy metal concentrations in the different fractions obtained by sequential extraction show distinct distribution trends. The extractable fraction ranges from 25.5 to 88% of the total element content. With the pH of the extractant fall below the neutral and acidic ranges, the concentrations of heavy metals rise substantially due to the released of metals bound to carbonate fraction.     

高浓度印染废水处理工程工艺条件与实例分析

研究以三相生物流化床作为工程化反应器处理印染废水的工程工艺条件及操作特性，分别测定流化床内的气相含率，兴体循环速度及体积氧传质系数。     

大顶子山航电枢纽工程建库后上游水质总量控制研究

松花江大顶子山枢纽工程建设后,库区内水体流线及扩散规律的变化将影响库区内水质,受沿江排污影响,其规划目标的水环境容量将发生改变,因此对建库后上游水质总量控制进行研究很有意义.     

浅谈水泥生产中回转窑窑尾SO_2监测

窑尾监测SO_2时,有时会出现其浓度低于仪器最低检出限的情况,应根据窖尾类型、煤中硫含量大小,有无脱硫工艺等情况,认真对比、计算分析,以保证监测数据真实可靠。     

氯化处理船舶压载水对外来生物存活的影响

初步研究了氯化处理船舶压载水对外业生物存活的影响。结果表明，氯化自理对杀灭中的细菌最为有效；对单细胞灌类则依种类需要不同浓度的有效氯，有的种类在４０ｍｇ／Ｌ有效氯作用下依然能存活。     

聚合物材料在快速原型制造技术中的应用

介绍聚合物材料作为成形原料在主要的快速原型制造(RPM)工艺中的应用情况。具体按照立体印刷成形(SLA)、层合实体制造(LOM)、选域激光烧结(SLS)及熔融沉积造型(FDM)这4种工艺的不同,阐述与各工艺对应的聚合物材料的种类、聚合物材料成形过程中可能出现的问题及解决方案。总结了聚合物材料原型的应用情况和聚合物材料在RPM技术应用中存在的问题。     

餐厨垃圾处理方式的探讨

餐厨垃圾污染日益严重,对环境和人类健康构成巨大威胁.如何对餐厨垃圾进行资源化、减量化、无害化处理,是摆在环保工作者面前的一个课题,本文通过对国内外餐厨余物的产生情况、处理现状以及处理工艺进行分析,探讨适合哈尔滨市餐厨垃圾的处理方式.     

烧结砖生产中氟的逸出及钙基废渣固氟特性研究

砖坯烧制过程中，氟逸出的初始温度约为600℃，大部分氟在约800℃至砖坯发生明显烧结的温度内逸出，以CaO含量高的粘土原料制砖，氟逸出量相对较少。在此基础上，提出在制砖原料中添加适量钙基废渣抑制氟的逸出，并进行了详细的实验室和工业性试验；结果表明，在适宜添加量下，存氟率由约25％增至70％以下，且不影响砖制品质量。