Age and growth of the naticid gastropod <Emphasis Type="Italic">Polinices pulchellus</Emphasis> (Gastropoda: Naticidae) based on length frequency analysis and statolith growth rings

In Red Wharf Bay, UK the naticid gastropod, Polinices pulchellus, was more abundant and more highly aggregated during the summer months (June–August 2001) than during the winter (December 2000). Whilst small numbers of juvenile P. pulchellus (4–6 mm shell length) were present throughout the year the population consisted mainly of individuals of 12–14 mm shell length. Juvenile snails grew rapidly in size during the winter and early spring; growth then virtually ceased between May and June, following which there was a further period of rapid growth between August and February. Densities ranged between 57 and 4,073 ha⁻¹ and the largest individual collected during this investigation measured 16.2 mm in shell length. Statoliths from adult P. pulchellus revealed the presence of a settlement ring and two prominent growth rings (rings 1 and 2). A curvilinear relationship exists between statolith diameter and shell length in snails up to 16 mm in length. Settlement rings ranged in diameter from 19.7 to 45.2 μm (mean 29.8 μm; SE=0.41) giving an estimated shell length of the settled juvenile of 1.1 mm. The diameter of ring 1 and ring 2 were significantly correlated indicating that rapid growth during the first year is maintained during year 2. Shell lengths estimated from the diameters of the prominent statolith rings and those obtained from length frequency data analysis (LFDA), were broadly congruent strongly suggesting an annual periodicity to the statolith rings. The largest snails (>15 mm) present within this population were estimated to be between 2 and 3 years old. Von Bertallanfy seasonal growth curves obtained from the LFDA predicted values of L∞, K and t ₀ of 14.32 mm, 1.54 and −0.14 years, respectively, suggesting that P. pulchellus rapidly attains its maximum asymptotic size.     

Ecotoxicity in Aliivibrio fischeri of Ibuprofen,Omeprazole and their Mixtures

The acute ecotoxic effects of ibuprofen and omeprazole and their mixture have been measured using Aliivibrio fischeri as a biomodel. The toxic effects were also tested after 5 days, and an effect-driven approach was used to analyse the results. The toxic effects of the mixtures were compared with the predictions obtained using concentration addition and independent action mathematical methods.

According to the Passino and Smith classification, the results indicate that ibuprofen can be considered slightly toxic (10<EC₅₀ <100?mg?L^-1), while omeprazole can be denoted as moderately toxic (1<EC₅₀ <10?mg?L^-1) to Aliivibrio fischeri. An overestimation of the actual ecotoxic effect of the mixture was found when the concentration addition and independent action methods were applied. Finally, the effect-driven approach indicated that the transformation products of the studied drugs should be prioritized for risk assessment purposes.     

Formulation of a soil-pesticide transport model based on a compartmental approach

A semianalytical soil-pesticide transport model is formulated based on a compartmental approach to determine spatial and temporal variations of pesticide residues across a soil profile. The compartmental model is implemented by drawing an analogy between a series of continuous-flow stirred tank reactors and a soil horizon that consists of multiple perfectly mixed compartments. The analogy is strengthened by exploiting a relation between the compartment series and the conventional convective-dispersive equation (CDE) for vertical transport in the soil. Consequently, the number of compartments in the model formulation is not free, but dictated as a function of transport parameters. The model formulation allows consideration of arbitrary boundary value specifications and also, for some cases, spatially varying initial concentration profiles. Sorption kinetics is represented via a two-site model that involves a linear sorption isotherm and a first-order irreversible sorption or a radial diffusive penetrating model. For these three cases, analysis of the compartmental model allows the resultant concentration profiles to be expressed in terms of the Poisson distribution. When a nonlinear kinetic sorption model is used to simulate the sorption processes, an analytical solution is not found and a numerical approach is required.     

Fenarimol solar degradation pathways and photoproducts in aqueous solution

The degradation photoproducts of the fungicide fenarimol obtained from irradiation of aqueous solutions with sunlight were characterised. The photoproducts resulting from samples with different exposure times were extracted and separated using chromatographic techniques. Seven main photoproducts were detected using high performance liquid chromatography with a photodiode array detector, gas chromatography with mass spectrometry detector and Fourier transform infrared spectroscopy. Structures are suggested for possible photoproducts based on the characterisation results, minimum energy geometry of the parent compound, and the mass spectral behaviour of fenarimol. These correspond to the compounds with m/z 328 (three structural isomers (a), (b) and (c)), m/z 294 (two structural isomers (a) and (b)), m/z 292, 278 and 190. Of the various major products detected, the isomer 328(a) is seen to be particularly unstable under the action of sunlight. The most stable photoproducts are found to be those with m/z 294(a), 278 and 190. However, upon prolonged solar irradiation all of these break down to produce polar, low molecular weight compounds. Comparison with our own and other results on fenarimol photolysis indicate significant solvent effects on the process. The combination of these structural characterisation results and previous data from spectroscopic and photodegradation kinetics studies allows us to suggest some possible mechanisms for the photodegradation of fenarimol under sunlight.     

Analysis of PM2.5 and PM10 in the atmosphere of Mexico City during 2000-2002

During the last 10 years, high atmospheric concentrations of airborne particles recorded in the Mexico City metropolitan area have caused concern because of their potential harmful effects on human health. Four monitoring campaigns have been carried out in the Mexico City metropolitan area during 2000-2002 at three sites: (1) Xalostoc, located in an industrial region; (2) La Merced, located in a commercial area; and (3) Pedregal, located in a residential area. Results of gravimetric and chemical analyses of 330 samples of particulate matter (PM) with an aerodynamic diameter less than 2.5 microm (PM2.5) and PM with an aerodynamic diameter less than 10 microm (PM10) indicate that (1) PM2.5/PM10 average ratios were 0.42, 0.46, and 0.52 for Xalostoc, La Merced, and Pedregal, respectively; (2) the highest PM2.5 and PM10 concentrations were found at the industrial site; (3) PM2.5 and PM10 concentrations were lower at nighttime; (4) PM2.5 and PM10 spatial averages concentrations were 35 and 76 microg/m3, respectively; and (5) when the PM2.5 standard was exceeded, nitrate, sulfate, ammonium, organic carbon, and elemental carbon concentrations were high. Twenty-four hour averaged PM2.5 concentrations in Mexico City and Sao Paulo were similar to those recorded in the 1980s in Los Angeles. PM10 concentrations were comparable in Sao Paulo and Mexico City but 3-fold lower than those found in Santiago.     

EROD induction and PCDD/F levels in fish liver from the Biobio River in Chile

The Biobio River basin, located in central Chile, is one of the most important freshwater resources for a population of 1 million inhabitants. The river receives discharges of pulp mills, sewage treatment plants and there is a diffuse input of materials coming from the drainage basin. Previous studies reported high levels of etoxyresorufin-O-deethylase (EROD) induction in fish from the lower stretch of the river, mainly due to polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) exposure. The present study investigates polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzo-furans (PCDFs) levels as well as EROD induction in fish livers from Central Chile's Biobio River. Dioxin and furan levels in fish livers are reported for the first time in three areas of the Basin. In all samples the highest concentrations were found for the octachlorodibenzo-p-dioxin (OCDD) and PCDD/F TEQ concentrations ranged from 2.83 to 6.33 ppt (wet weight). The results indicate a clear induction of EROD activity in different fish species as the river mouth is approached, although this induction is not clearly related with dioxin and furan levels found in the fish livers. Our results clearly show that other pollutants might be acting as EROD inductors in the Biobio Basin.     

Distribution of Pb, V, Cr, Ni, Cd, Cu and Fe in particles formed from the combustion of waste oils

The determination of Pb, V, Cr, Ni, Cd, Cu and Fe in particles of different size obtained from the combustion of waste oils has been carried out. The study consists of the separation of several fractions according to the size of particles, the wet digestion and the individual analysis by graphite furnace atomic absorption spectrometry of the mentioned metals. Taking into account the volatilization temperature of different compounds containing the metals and their distribution on the size fractions, the mineral speciation of metals is proposed.     

Semiconductor-assisted photodegradation of lignin, dye, and kraft effluent by Ag-doped ZnO

This work reports a preliminary study of semiconductor-assisted photochemical degradation of lignin, Remazol Brilliant Blue R and Kraft E1 paper effluent by using ZnO and Ag-doped ZnO photocatalysts. The doped semiconductor was prepared in the reaction media by photoreduction of silver nitrate. With the use of 100 mg of ZnO and 15 mg of Ag-ZnO, almost total decolorization of the dye and lignin samples in reaction times lower than 60 min were observed. Extending the photochemical reaction up to 120 min, the total organic carbon content (TOC) was reduced in 90%. For the paper effluent, a fast decolorization was obtained for relatively short reaction times. However, de TOC reduction was negligible (near of 10%) up to high reaction times (300 min). By using the Ag-ZnO photocatalyst, the toxicity of lignin and Kraft E1 effluent toward E. Coli was completely removed. For the dye, the formation of transient toxic species was observed.     

Benzo[a]pyrene removal from soil by Phanerochaete chrysosporium grown on sugarcane bagasse and pine sawdust

The capacity of Phanerochaete chrysosporium grown on soil with added sugarcane baggase (BP) and pine sawdust (PS) to remove benzo(a)pyrene (BaP) was studied. A half factorial two-level experiment 2(4-1) was designed to determine the effect of: type of lignocellulosic material (BP and PS) for fungus growth, age of fungus (5 and 10d), amount of lignocellulosic material (10% and 15% w/w) and soil moisture content (water holding capacity of 45% and 56% w/w). Inoculum obtained at different ages showed that the capacity of P. chrysosporium to remove BaP depends on the lignocellulosic used and on inoculum age. Abiotic BaP removal was affected significantly (p<0.05) by inoculum age, type of lignocellulosic added and soil moisture content. The removal of BaP by lignocellulosic material was more effective by young inocula (71.97 mg BaP kg(-1) dry soil), with high percentage of added lignocellulosic (71.57 mg BaP kg(-1) dry soil) and at low soil moisture content (73.07 mg BaP kg(-1) dry soil). When fungus was grown on BP, maximum BaP removal rate was obtained at 5d of incubation (10.85 mg BaP d(-1)l(-1) and 50.12 mg BaP kg(-1) dry soil), while in PS maximum BaP removal was obtained at 10d of incubation (12.06 mg BaP d(-1)l(-1) and 39.94 mg BaP kg(-1) dry soil).     

Low-grade MgO used to stabilize heavy metals in highly contaminated soils

Low-grade MgO may be an economically feasible alternative in the stabilization of heavy metals from heavily contaminated soils. The use of MgO is described acting as a buffering agent within the pH 9-11 range, minimizing heavy metals solubility and avoiding the redissolution that occurs when lime is used. The effectiveness of LG-MgO has been studied as stabilizer agent of heavily polluted soils mainly contaminated by the flue-dust of the pyrite roasting. The use of LG-MgO as a reactive medium ensures that significant rates of metal fixation, greater than 80%, are achieved. The heavy metals leachate from the stabilized soil samples show a concentration lower than the limit set to classify the waste as non-special residue. Regardless of the quantity of stabilizer employed (greater than 10%), LG-MgO provides an alkali reservoir that allows guaranteeing long-term stabilization without varying the pH conditions.