Analysis of heavy metals and aromatics compounds in soil layers of a sanitary landfill

Solid waste presents the potential for contamination of the soil when it is improperly managed. One of the great challenges of today's society is to promote the proper disposal of municipal solid waste in order to guarantee the safety of public health and to avoid risks to the environment. In this context, the objective of this study is to analyze the concentration profiles of heavy metals and aromatic hydrocarbons of risk that human health in landfill soil. Such works provides an important tool to evaluate the possible presence of contaminants from inappropriate waste disposal, as well as to assist in the management of waste and to prevent environmental contamination. In order to analyze cadmium (Cd), lead (Pb), nickel (Ni), arsenic (As), and mercury (Hg), which are toxic elements, and aromatic hydrocarbons, including benzene, toluene, ethylbenzene, o‐xylene, m‐xylene, and p‐xylene, soil samples were collected at different sites and depths. Neither Cd nor As was detected in any of the samples that were analyzed. Pb levels ranged from 5.34 milligrams per kilograms (mg/kg) to 7.40 mg/kg, Ni levels ranged from 2.17 mg/kg to 3.00 mg/kg, and Hg levels ranged from 75.4 micrograms per kilograms (μg/kg) to 88.3 μg/kg. The aromatic hydrocarbon compounds of benzene, toluene, ethylbenzene, and o‐xylene were below 5.5 μg/kg, and m‐, p‐xylene was below 11 μg/kg. The analysis of heavy metals and aromatic hydrocarbons present in the landfill soil showed concentrations below the soil quality guideline values of the Brazilian National Environment Council (CONAMA) Resolution 420, which has criteria for the presence of chemical substances in soil for Brazil. Therefore, the low levels of chemicals may be related to the operational time of the landfill or to the population profile of the municipality, which is predominantly composed of persons involved in family‐based agriculture.     

Cultivable microbiome and its resistance to antimicrobials isolated from <Emphasis Type="Italic">Zaprionus indianus</Emphasis>

The objective of this study was to identify Z. indianus in PEJC and PESCAN. Listed are the following methods: to isolate bacteria from the integument of the Z. indianus species collected and to check the resistance of microorganisms to antibiotics. Collections of Z. indianus were performed in four seasons of the two parks. The results obtained suggest that the low amount of Z. indianus collected can be justified by environmental factors such as high average temperature and low average humidity. It is noted that there is a predominance of bacteria of the Enterobacteriaceae family found in both the PEJC and the PESCAN. The antibiogram performed for the isolated PEJC bacteria shows statistical significance when comparing the edge and inside values of the park. Studies with fungi were also carried out, and it was evidenced that Trichophyton spp. was the genus that most inhabited the two environments studied. The ability of fluconazole and ketoconazole to inhibit fungal growth was also investigated, and considering the concentration tested may suggest that they have good action spectra. Plasmid profile data show that 60% of antibiotic-resistant bacteria have plasmids. The values found show that Z. indianus can act as vectors of microorganisms that affect the healthy animals and humans and that these organisms may be influenced by seasons.     

Cross-sectional biomonitoring study of pesticide exposures in Queensland,Australia, using pooled urine samples

A range of pesticides are available in Australia for use in agricultural and domestic settings to control pests, including organophosphate and pyrethroid insecticides, herbicides, and insect repellents, such as N,N-diethyl-meta-toluamide (DEET). The aim of this study was to provide a cost-effective preliminary assessment of background exposure to a range of pesticides among a convenience sample of Australian residents. De-identified urine specimens stratified by age and sex were obtained from a community-based pathology laboratory and pooled (n = 24 pools of 100 specimens). Concentrations of urinary pesticide biomarkers were quantified using solid-phase extraction coupled with isotope dilution high-performance liquid chromatography–tandem mass spectrometry. Geometric mean biomarker concentrations ranged from <0.1 to 36.8 ng/mL for organophosphate insecticides, <0.1 to 5.5 ng/mL for pyrethroid insecticides, and <0.1 to 8.51 ng/mL for all other biomarkers with the exception of the DEET metabolite 3-diethylcarbamoyl benzoic acid (4.23 to 850 ng/mL). We observed no association between age and concentration for most biomarkers measured but noted a “U-shaped” trend for five organophosphate metabolites, with the highest concentrations observed in the youngest and oldest age strata, perhaps related to age-specific differences in behavior or physiology. The fact that concentrations of specific and non-specific metabolites of the organophosphate insecticide chlorpyrifos were higher than reported in USA and Canada may relate to differences in registered applications among countries. Additional biomonitoring programs of the general population and focusing on vulnerable populations would improve the exposure assessment and the monitoring of temporal exposure trends as usage patterns of pesticide products in Australia change over time.     

Persistence,variance and toxic levels of organochlorine pesticides in fluvial sediments and the role of black carbon in their retention

The present study assesses the persistence and variation of organochlorine pesticides (OCPs) and their regulation by total organic carbon (TOC) and black carbon (BC) in freshwater sediment. Sediment samples from the Yamuna River, a major tributary of the Ganges (one of the most populated and intensively used rivers in Asia), had high levels of Σ₂₀OCPs (21.41 to 139.95 ng g^?1). β-Hexachlorocyclohexane (β-HCH) was the most predominant component. ΣHCH and Σdichloro-diphenyl-trichloroethane (DDT) constituted ~86 % of Σ₂₀OCPs. Isomer ratios indicated fresh usage of lindane, DDT and technical-grade HCH. Toxicological comparison with freshwater sediment quality guidelines showed γ-HCH and DDT at high levels of concern. β-HCH, α-HCH, endrin, heptachlor epoxide, dichloro-diphenyl-dichloroethane (DDD), dichloro-diphenyl-dichloroethylene and chlordane were above some of the guideline levels. TOC and BC had mean concentrations of 1.37?±?0.51 % and 0.46?±?0.23 mg g^?1, respectively. BC constituted 1.25 to 10.56 % of TOC. We observed low to moderate correlations of BC with isomers of HCH, p,p′-DDT and methoxychlor while of TOC with Σ₂₀OCPs, γ-HCH, endosulfan sulfate and methoxychlor. Principal component analysis enabled correlating and clustering of various OCPs, BC and TOC. OCP distribution was related with pH, electrical conductivity, soil moisture and finer fractions of sediment. OCPs with similarity in properties that determine their interactions with carbonaceous components of sediment clustered together. A number of factors may, thus, be involved in the regulation of interactive forces between BC and OCPs. BC in this study may be more important than TOC in the retention of some OCPs into fluvial sediments, thereby reducing their bioavailability. The finding is probably the first of its kind to report and emphasises the role of BC in the persistence of OCPs in fluvial sediments.     

Social acceptance of wind and solar power in the Brazilian electricity system

Renewable energy is often associated with the production of clean electricity and free of significant adverse impacts. However, several studies have been highlighting the importance of the assessment of social impacts of these technologies, including not only the benefits but also the potential negative aspects most frequently affecting local population. The energy matrix in Brazil is already built up on a renewable system largely supported on hydropower but other technologies with special emphasis on wind power start to have a major role, with a strong growth forecasted for this sector in the coming years. This article discusses the integration of solar and wind power in the Brazilian electricity system focusing on the social awareness and acceptance for the population living in high potential regions. For this, a questionnaire was proposed with the aim of evaluating the level of knowledge of wind and solar power, their social acceptance and perceptions towards cost, local development and environmental impacts. The questionnaire was implemented in an academic institution in the State of Rio Grande do Norte (RN) including students and professors as key actors for the present and future energy policy decision making. The implementation process and the obtained results are described allowing to conclude on the high level of acceptance of solar and wind power in the country and the region, with low evidence of not in my backyard syndrome.     

Method validation for control determination of mercury in fresh fish and shrimp samples by solid sampling thermal decomposition/amalgamation atomic absorption spectrometry

A method for the determination of total mercury in fresh fish and shrimp samples by solid sampling thermal decomposition/amalgamation atomic absorption spectrometry (TDA AAS) has been validated following international foodstuff protocols in order to fulfill the Brazilian National Residue Control Plan. The experimental parameters have been previously studied and optimized according to specific legislation on validation and inorganic contaminants in foodstuff. Linearity, sensitivity, specificity, detection and quantification limits, precision (repeatability and within-laboratory reproducibility), robustness as well as accuracy of the method have been evaluated. Linearity of response was satisfactory for the two range concentrations available on the TDA AAS equipment, between approximately 25.0 and 200.0 μg kg^?1 (square regression) and 250.0 and 2000.0 μg kg^?1 (linear regression) of mercury. The residues for both ranges were homoscedastic and independent, with normal distribution. Correlation coefficients obtained for these ranges were higher than 0.995. Limits of quantification (LOQ) and of detection of the method (LDM), based on signal standard deviation (SD) for a low-in-mercury sample, were 3.0 and 1.0 μg kg^?1, respectively. Repeatability of the method was better than 4%. Within-laboratory reproducibility achieved a relative SD better than 6%. Robustness of the current method was evaluated and pointed sample mass as a significant factor. Accuracy (assessed as the analyte recovery) was calculated on basis of the repeatability, and ranged from 89% to 99%. The obtained results showed the suitability of the present method for direct mercury measurement in fresh fish and shrimp samples and the importance of monitoring the analysis conditions for food control purposes. Additionally, the competence of this method was recognized by accreditation under the standard ISO/IEC 17025.     

Assessment of the Effects of Sugar Cane Plantation Burning on Daily Counts of Inhalation Therapy

ABSTRACT

This study was designed to evaluate the association between sugar cane plantation burning and hospital visits in Araraquara in the state of São Paulo, Brazil. From June 1 to August 31, 1995, the daily number of visits of patients who needed inhalation therapy in one of the main hospitals of the city was recorded and used as health impairment estimation. Sedimentation of particle mass (the amount of particles deposited on four containers filled with water) was measured daily. The association between the weight of the sediment and the number of visits was evaluated by means of Poisson regression models controlled for seasonality, temperature, day of the week, and rain. We found a significant and dose-dependent relationship between the number of visits and the amount of sediment. The relative risk of visit associated with an increase of 10 mg in the sediment weight was 1.09 (1-1.19), and the relative risk of an inhalation therapy was 1.20 (1.03-1.39) on the most polluted days (fourth quartile of sediment mass). These results indicate that sugar cane burning may cause deleterious health effects in the exposed population.     

Determination of heavy metals in bee honey with connected and not connected metal wires using inductively coupled plasma atomic emission spectrometry (ICP–AES)

Two honey samples are taken from two parts of the same honeycomb: one that contacts to the surface of the wire and the other taken from the surface that does not contact the wires. Heavy metal contents of these two samples were determined by inductively coupled plasma atomic emission spectrometry). The Mo, Cd, Cr, Fe, Mn, Ni and Zn contents of the honey in contact with wire is higher when compared to the other. Especially, Fe and Zn contents of honey in contact with wire is much higher than the non-contact one. These values are, respectively, 190.21 and 112.76 ppm. Besides, Ni content of honey in contact with wire is approximately 50% higher.     

Physicochemical properties and mineral contents of seven different date fruit (Phoenix dactylifera L.) varieties growing from Saudi Arabia

The date (Phoenix dactylifera L.) fruits (Soukari, Soulag, Barhi, Khulas, Rozaiz, Soughi and Monaif) were evaluated with respect to some physical and chemical properties. While crude protein contents of fruits change between 1.51 % (Soulag) to 2.41 % (Soughi), crude fibre contents ranged between 1.91 % (Soukari) to 3.90 % (Barhi). Vitamin C contents of date samples changed between 971.82 mg/kg (Soughi) to 1,453.15 mg/kg (Barhi). Antioxidant activity of date fruits ranged from 80.07 IC₅₀ (Soukari) to 81.21 IC₅₀ (Soulag). The highest phenolic content was found in Khulas with a mean value of 198 mg GAE/100 g. Energy values of date fruits ranged from 3,725 kcal/kg (Soulag) to 3,870 kcal/kg (Soukari). Sucrose contents of date fruits changed between 1.02 % (Soulag) to 55.71 % (Soukari). Mineral contents of several date fruits were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES). Date samples contain potassium at a range between 7,468 mg/kg (Khulas) to 9,619 mg/kg (Soulag). Phosphorus contents of fruits were found between 1,848 mg/kg (Soulag) to 3,066 mg/kg (Rozaiz) and followed by magnesium and calcium. The highest Zn (9.33 mg/kg), Cu (4.27 mg/kg) and Mn (3.26 mg/kg) were found in Rozaiz, Soukari and Barhi samples, respectively.