Colloid transport in unsaturated porous media: the role of water content and ionic strength on particle straining

Packed column and mathematical modeling studies were conducted to explore the influence of water saturation, pore-water ionic strength, and grain size on the transport of latex microspheres (1.1 microm) in porous media. Experiments were carried out under chemically unfavorable conditions for colloid attachment to both solid-water interfaces (SWI) and air-water interfaces (AWI) using negatively charged and hydrophilic colloids and modifying the solution chemistry with a bicarbonate buffer to pH 10. Interaction energy calculations and complementary batch experiments were conducted and demonstrated that partitioning of colloids to the SWI and AWI was insignificant across the range of the ionic strengths considered. The breakthrough curve and final deposition profile were measured in each experiment indicating colloid retention was highly dependent on the suspension ionic strength, water content, and sand grain size. In contrast to conventional filtration theory, most colloids were found deposited close to the column inlet, and hyper-exponential deposition profiles were observed. A mathematical model, accounting for time- and depth-dependent straining, produced a reasonably good fit for both the breakthrough curves and final deposition profiles. Experimental and modeling results suggest that straining--the retention of colloids in low velocity regions of porous media such as grain junctions--was the primary mechanism of colloid retention under both saturated and unsaturated conditions. The extent of stagnant regions of flow within the pore structure is enhanced with decreasing water content, leading to a greater amount of retention. Ionic strength also contributes to straining, because the number of colloids that are held in the secondary energy minimum increases with ionic strength. These weakly associated colloids are prone to be translated to stagnation regions formed at grain-grain junctions, the solid-water-air triple point, and dead-end pores and then becoming trapped.     

The historical record of PAH, PCB, trace metal and fly-ash particle deposition at a remote lake in north-west Scotland

Sediment cores taken from the deep basin of Loch Coire nan Arr in north-west Scotland were dated using 210Pb calibrated spheroidal carbonaceous particle (SCP) profiles and analysed for trace metals, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). These data show that the site is one of the least contaminated by atmospheric pollution in the UK. Peak concentrations of PAHs were found to be equivalent to background values at sites in the English Lake District. The date of concentration maxima for SCP, PCB and some metals were in agreement with previously published polychlorinated dibenzo-p-dioxin/polychlorinated dibenzofuran (PCDD/F) data suggesting long-range industrial sources. The date of individual PAH concentration maxima were earlier, but concomitant with each other, possibly suggesting the influence of a local source. Comparison with remote European mountain lakes shows Loch Coire nan Arr to be one of the least contaminated sites in Europe with respect to PCBs, but more contaminated with respect to PAHs.     

Recovery of mercury-contaminated fisheries

In this paper, we synthesize available information on the links between changes in ecosystem loading of inorganic mercury (Hg) and levels of methylmercury (MeHg) in fish. Although it is widely hypothesized that increased Hg load to aquatic ecosystems leads to increases in MeHg in fish, there is limited quantitative data to test this hypothesis. Here we examine the available evidence from a range of sources: studies of ecosystems contaminated by industrial discharges, observations of fish MeHg responses to changes in atmospheric load, studies over space and environmental gradients, and experimental manipulations. A summary of the current understanding of the main processes involved in the transport and transformation from Hg load to MeHg in fish is provided. The role of Hg loading is discussed in context with other factors affecting Hg cycling and bioaccumulation in relation to timing and magnitude of response in fish MeHg. The main conclusion drawn is that changes in Hg loading (increase or decrease) will yield a response in fish MeHg but that the timing and magnitude of the response will vary depending of ecosystem-specific variables and the form of the Hg loaded.     

The potential contribution of urban runoff to surface sediments of the Passaic River: sources and chemical characteristics

Urban runoff has been reported as the second most frequent cause of surface water pollution in the United States. Due to the incidence of runoff in urban areas, it was of interest to estimate the impact runoff may have to recent sediment quality within the lower reaches of the Passaic River. Study objectives included i) review of recent urban runoff studies to determine the occurrence and pattern of distribution of chemicals in runoff; ii)comparison of the "fingerprints" from urban runoff studies to the contaminant distributions in surface sediments from the River; and iii) estimation of mass loadings to the surface sediments using surrogate data. The analyses showed that metals and PAH distributions in the sediments were similar to those observed in runoff from diverse locations, suggesting that urban runoff composition within the Passaic watershed is similar to other urban areas. Mass loading calculations demonstrated that urban runoff is a significant source of the metals observed in the sediments, and that PAH and DDT sediment loadings could, in some cases, be accounted for by urban runoff. Observed sediment loads for PCBs, however, were significantly higher than were estimated from urban runoff.     

Nitrogen removal from urban stormwater runoff through layered bioretention columns.

Bioretention is a low-impact technology used for the treatment of stormwater runoff in developed areas. The fates of mineral nitrogen compounds in two bioretention columns (RP1 and RP2) with different media-layering characteristics were investigated under multiple loadings of simulated urban runoff. The immediate capture of nitrogen was evaluated, with nitrogen transformation reactions that occurred during the drying periods between rainfall events. A greater proportion of ammonium was removed from runoff in RP2 (68 +/- 16%), which had a high permeability layer over a lower permeability layer, than in RP1 (12 +/- 6%), which had the inverse configuration. Both column systems demonstrated nitrate export (9 +/- 32% and 54 +/- 22% greater than input for RP1 and RP2, respectively), attributed to washout of nitrate resulting from nitrification processes between runoff loading events. Bioretention media with a less permeable bottom soil layer could form an anoxic/anaerobic zone for promoting nitrification/denitrification processes.     

Biodegradation and biosorption of acid anthraquinone dye

The acid anthraquinone dye Tectilon Blue (TB4R) is a major coloured component from the aqueous effluent of a carpet printing plant in Northern Ireland. The aerobic biodegradation of TB4R has been investigated experimentally in batch systems, using three strains of bacteria, namely, Bacillus gordonae (NCIMB 12553), Bacillus benzeovorans (NCIMB 12555) and Pseudomonas putida (NCIMB 9776). All three strains successfully decolourised the dye, and results were correlated using Michaelis-Menten kinetic theory. A recalculation of the reaction rate constants, to account for biosorption, gave an accurate simulation of the colour removal over a 24-h period. Up to 19% of the decolorisation was found to be caused by biosorption of the dye onto the biomass, with the majority of the decolorisation caused by utilisation of the dye by the bacteria. The reaction rate was found to be intermediate between zero and first order at dye concentrations of 200-1000 mg/l.     

Threats to biodiversity from cumulative human impacts in one of North America's last wildlife frontiers

Land‐use change is the largest proximate threat to biodiversity yet remains one of the most complex to manage. In British Columbia (BC), where large mammals roam extensive tracts of intact habitat, continued land‐use development is of global concern. Extant mammal diversity in BC is unrivalled in North America owing, in part, to its unique position at the intersection of alpine, boreal, and temperate biomes. Despite high conservation values, understanding of cumulative ecological impacts from human development is limited. Using cumulative‐effects‐assessment (CEA) methods, we assessed the current human footprint over 16 regional ecosystems and 7 large mammal species. Using historical and current range estimates of the mammals, we investigated impacts of human land use on species’ persistence. For ecosystems, we found that bunchgrass, coastal Douglas fir, and ponderosa pine have been subjected to over 50% land‐use conversion, and over 85% of their spatial extent has undergone either direct or estimated indirect impacts. Of the mammals we considered, wolves were the least affected by land conversion, yet all species had reduced ranges compared with historical estimates. We found evidence of a hard trade‐off between development and conservation, most clearly for mammals with large distributions and ecosystems with high levels of conversion. Rather than serve as a platform to monitor species decline, we strongly advocate these data be used to inform land‐use planning and to assess current conservation efforts. More generally, CEAs offer a robust tool to inform wildlife and habitat conservation at scale.     

Spatial analysis of a large magnitude erosion event following a Sierran wildfire

High intensity wildfire due to long-term fire suppression and heavy fuels buildup can render watersheds highly susceptible to wind and water erosion. The 2002 "Gondola" wildfire, located just southeast of Lake Tahoe, NV-CA, was followed 2 wk later by a severe hail and rainfall event that deposited 7.6 to 15.2 mm of precipitation over a 3 to 5 h time period. This resulted in a substantive upland ash and sediment flow with subsequent down-gradient riparian zone deposition. Point measurements and ESRI ArcView were applied to spatially assess source area contributions and the extent of ash and sediment flow deposition in the riparian zone. A deposition mass of 380 Mg of ash and sediment over 0.82 ha and pre-wildfire surface bulk density measurements were used in conjunction with two source area assessments to generate an estimation of 10.1 mm as the average depth of surface material eroded from the upland source area. Compared to previous measurements of erosion during rainfall simulation studies, the erosion of 1800 to 6700 g m(-2) mm(-1) determined from this study was as much as four orders of magnitude larger. Wildfire, followed by the single event documented in this investigation, enhanced soil water repellency and contributed 17 to 67% of the reported 15 to 60 mm ky(-1) of non-glacial, baseline erosion rates occurring in mountainous, granitic terrain sites in the Sierra Nevada. High fuel loads now common to the Lake Tahoe Basin increase the risk that similar erosion events will become more commonplace, potentially contributing to the accelerated degradation of Lake Tahoe's water clarity.