Comparison of the particle size distribution of heavy-duty diesel exhaust using a dilution tailpipe sampler and an in-plume sampler during on-road operation

Originally constructed to develop gaseous emission factors for heavy-duty diesel trucks, the U.S. Environmental Protection Agency's (EPA) On-Road Diesel Emissions Characterization Facility has been modified to incorporate particle measurement instrumentation. An electrical low-pressure impactor designed to continuously measure and record size distribution data was used to monitor the particle size distribution of heavy-duty diesel truck exhaust. For this study, which involved a high-mileage (900,000 mi) truck running at full load, samples were collected by two different methods. One sample was obtained directly from the exhaust stack using an adaptation of the University of Minnesota's air-ejector-based mini-dilution sampler. The second sample was pulled from the plume just above the enclosed trailer, at a point approximately 11 m from the exhaust discharge. Typical dilution ratios of about 300:1 were obtained for both the dilution and plume sampling systems. Hundreds of particle size distributions were obtained at each sampling location. These were compared both selectively and cumulatively to evaluate the performance of the dilution system in simulating real-world exhaust plumes. The data show that, in its current residence-time configuration, the dilution system imposes a statistically significant bias toward smaller particles, with substantially more nanoparticles being collected than from the plume sample.     

Land managers’ behaviours modulate pathways to visions of future land systems

Regional Environmental Change - Attempts to influence the development of land systems are often based on detailed scenarios that constrain relevant factors, describe a range of divergent but...     

Improved protection for children in forward-facing restraints during side impacts

OBJECTIVE: This study aims to determine the potential for improved child occupant protection in side impacts that can be obtained using rigid and semi-rigid anchorage systems and the addition of energy-absorbing padding in the side structures of child restraints. METHODS: This study uses a comprehensive set of simulated side impacts to evaluate the potential for improved side impact protection in forward-facing child restraints. Factors investigated included methods of anchoring the restraint to the vehicle, energy-absorbing materials in the side structure of restraints, and design features of the restraints such as side wing geometry and seat belt routing. RESULTS: The results show clearly that completely rigid lower attachment of restraints offers the potential for great reductions in head injury risk, which anchorage systems employing a combination of a rigid anchorage bar and webbing attached to a child restraint cannot match. The addition of energy absorbing material in the side structure of restraint systems is effective when the head is fully contained within an adequately designed side wing structure. For restraints anchored by seat belts and loop style semi rigid anchorage straps, belt routing has the potential to significantly affect occupant head excursion. CONCLUSIONS: The results suggest that current child restraint standards and consumer testing protocols do not adequately encourage best practice design of child restraints for side impact protection.     

Membrane bioreactor treatment of commonly used organophosphate pesticides

Five pesticide formulations registered for use in Canada containing organophosphate-insecticide active ingredients azinphos-methyl, chlorpyrifos, diazinon, malathion and phorate were subjected to treatment by membrane bioreactor (MBR) technology. The target active ingredients were introduced to the MBR at ppm level concentrations. The biodegradation of these compounds was analyzed daily using selected ion monitoring gas chromatography-mass spectrometry (GC/MS-SIM) following extraction of the analytes using solid-phase extraction (SPE). Amounts measuring 83 % to 98 % of the target analytes were removed with steady-state concentrations being reached within 5 days of their introduction. The dissolved oxygen, temperature, pH, and total heterotrophic bacterial population were monitored daily to ensure optimal conditions for biodegradation. The quality of the effluent from the MBR was assessed daily through spectrophotometric methods. Measurements were conducted for the concentration of ammonia, nitrate, nitrite, total and reactive phosphorus, as well as the chemical oxygen demand (COD) of the effluent. This study demonstrated that the MBR technology is feasible and efficient for treatment of organophosphate pesticides without introducing additional chemical additives.     

Growth of the Decision Tree: Advances in Bottom‐Up Climate Change Risk Management

There has recently been a return in climate change risk management practice to bottom‐up, robustness‐based planning paradigms introduced 40 years ago. The World Bank's decision tree framework (DTF) for “confronting climate uncertainty” is one incarnation of those paradigms. In order to better represent the state of the art in climate change risk assessment and evaluation techniques, this paper proposes: (1) an update to the DTF, replacing its “climate change stress test” with a multidimensional stress test; and (2) the addition of a Bayesian network framework that represents joint probabilistic behavior of uncertain parameters as sensitivity factors to aid in the weighting of scenarios of concern (the combination of conditions under which a water system fails to meet its performance targets). Using the updated DTF, water system planners and project managers would be better able to understand the relative magnitudes of the varied risks they face, and target investments in adaptation measures to best reduce their vulnerabilities to change. Next steps for the DTF include enhancements in: modeling of extreme event risks; coupling of human‐hydrologic systems; integration of surface water and groundwater systems; the generation of tradeoffs between economic, social, and ecological factors; incorporation of water quality considerations; and interactive data visualization.     

Recent Ogallala Aquifer Region Drought Conditions as Observed by Terrestrial Water Storage Anomalies from GRACE

Recent severe drought events have occurred over the Ogallala Aquifer region (OAR) during the period 2011–2015, creating significant impacts on water resources and their use in regional environmental and economic systems. The changes in terrestrial water storage (TWS), as indicated by the Gravity Recovery and Climate Experiment (GRACE), reveals a detailed picture of the temporal and spatial evolution of drought events. The observations by GRACE indicate the worst drought conditions occurred in September 2012, with an average TWS deficit of ~8 cm in the northern OAR and ~11 cm in the southern OAR, consistent with precipitation data from the Global Precipitation Climatology Project. Comparing changes in TWS with precipitation shows the TWS changes can be predominantly attributable to variations in precipitation. Power spectrum and squared wavelet coherence analysis indicate a significant correlation between TWS change and the El Nino‐Southern Oscillation, and the influence of equatorial Pacific sea surface temperatures on TWS change is much stronger in the southern OAR than the northern OAR. The results of this study illustrate the value of GRACE in not just the diagnosis of significant drought events, but also in possibly improving the predictive power of remote signals that are impacted by nonregional climatic events (El Nino), ultimately leading to improved water resource management applications on a regional scale. Editor’s note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

Planning,Designing, Operating,and Regulating a Geologic Sequestration Repository as an Underground Landfill—A Review

ABSTRACT

Geologic sequestration appears to be a technically feasible method of storing carbon dioxide in underground aquifers in order to lower greenhouse gas emissions into the atmosphere. The overall feasibility of geologic sequestration is still in question and as such, has been the focus of intense research over the past decade. Researchers have looked to the oil/gas industry and water well industry for lessons learned and technical knowledge, however, a better industry to emulate may well be the waste industry. Viewing geologic sequestration repositories as underground landfills has a great many benefits. First, there is a plethora of existing research and investigations that are directly analogous to geologic sequestration projects. Second, the regulatory framework is rather mature and can be easily adapted to serve geologic sequestration. This paper conducts an extensive literature search of the environmental, waste, and geologic sequestration literature to ascertain planning, design, and operational methodologies, lessons learned, and concepts that are directly useful for geologic sequestration to improve the technical and regulatory framework. Lastly, the paper uses a hypothetical underground landfill geologic sequestration site (ULGSS) in Florida, USA to discuss some of the findings and implications from the literature. It is concluded that there are a number of literature findings from the waste and environmental arena that should be adapted for geologic sequestration.

IMPLICATIONS Geologic sequestration is a promising solution for greenhouse gas control. This work supports that notion but suggests further improvements to the technical and regulatory framework based upon an extensive review of the waste management and environmental literature. The improvements include suggestions in the areas of permitting, site selection, operations, cost accounting, and special waste handling. Some of these improvements are discussed using a hypothetical project site in Florida, USA.