Measurements of peroxyacyl nitrates (PANS) in Mexico City: implications for megacity air quality impacts on regional scales

Peroxyacyl nitrates (PANs) were measured using gas chromatography with electron capture detection (GC/ECD) in north central Mexico City during February–March of 1997. Peroxyacetyl nitrate (PAN) was observed to exceed 30 ppb during five days of the study, with peroxypropionyl nitrate (PPN) and peroxybutryl nitrate (PBN) reaching 6 and 1 ppb maximum, respectively. Levels of total PANs typically exceeded 10 ppb during the period of measurement and showed a very strong diurnal variation with PANs maximum during the early afternoon and falling to less than 0.1 ppb during the evening hours. These levels of PANs are the highest reported values in North America (and the world) for an urban center, since levels of approximately 30 ppb were reported during the late 1970s in the Los Angeles area (South Coast Air Basin, Tuazon et al., 1978). Hydrocarbon measurements indicate that the levels of olefins, specifically butenes are significant in Mexico City. A time series taken of source indicator hydrocarbons taken before and during a Mexican National Holiday with reduced automobile traffic clearly show that mobile sources of butenes are as important as liquefied petroleum gas. Observations of 10–40 ppb C methyl-t-butyl ether (MTBE) are consistent with MTBE/gasoline fuel usage as a source of isobutene and formaldehyde. Both these reactive species can lead to increased oxidant and PAN formation. The strong diurnal profiles of PANs are consistent with regional clearing of the Mexico City air basin on a daily basis. Estimates are given using a simple box model calculation for a number of key primary and secondary pollutant emissions from this megacity on an annual basis. These calculations indicate that megacities can be important sources of both primary and secondary pollutants, and that PANs produced in megacity environments are likely to contribute strongly to regional scale ozone and aerosol productions during long range transport.     

Ozone patterns for three metropolitan statistical areas in North Carolina, USA

As part of an effort by the state of North Carolina to develop a State Implementation Plan (SIP) for 1-h peak ozone control, a network of ozone stations was established to monitor surface ozone concentrations across the state. Between 19 and 23 ozone stations made continuous surface measurements between 1993 and 1995 surrounding three major metropolitan statistical areas (MSAs): Raleigh/Durham (RDU), Charlotte/Mecklenburg (CLT), and Greensboro/High Point/Winston-Salem (GSO). Statistical averages of the meteorological and ozone data were performed at each Metropolitan Statistical Area (MSA) to study trends and/or relationships on high ozone days (days in which one of the MSA sites measured an hourly ozone concentration90.0 ppbv). County emission maps of precursor gases, wind roses, total area averages of ozone, total downwind averages of ozone deviations, upwind averages of ozone, and a modified delta ozone analysis were all obtained and analyzed. The results of this study show a reduction in the delta ozone relative to an earlier study at RDU, but no average significant change at CLT (no comparison can be made for GSO). The statistical data analyses in this study are used to quantify the importance of local contributions and regional transport, to ozone air pollution in the MSAs.     

Organochlorine pesticide residues in human milk in Punjab, India

Human milk samples collected from areas having intensive cotton cultivation and sparse cotton cultivation in Punjab (India) were analysed for organochlorine insecticides. Both DDT and HCH were detected in almost all the samples analysed. The average levels of Sigma-DDT and Sigma-HCH residues in samples from cotton-growing areas were significantly higher than in those from areas where cotton is sparsely grown. Residues of Sigma-DDT mainly comprised p,p'-DDT and p,p'-DDE, while those of Sigma-HCH residues were mainly in the form of its beta-isomer. Median values of 0.52 microg g(-1) of Sigma-DDT and 0.19 microg g(-1) of Sigma-HCH in samples of human milk from cotton-growing areas of Punjab (India) were higher than those reported from most other countries in the World.     

Sensitivity of the terrestrial biosphere to climatic changes: impact on the carbon cycle

The biosphere is a major pool in the global carbon cycle; its response to climatic change is therefore of great importance. We developed a 5 degrees x 5 degrees longitude-latitude resolution model of the biosphere in which the global distributions of the major biospheric variables, i.e. the vegetation types and the main carbon pools and fluxes, are determined from climatic variables. We defined nine major broad vegetation types: perennial ice, desert and semi-desert, tundra, coniferous forest, temperate deciduous forest, grassland and shrubland, savannah, seasonal tropical forest and evergreen tropical forest. Their geographical repartition is parameterized using correlations between observed vegetation type, precipitation and biotemperature distributions. The model computes as a function of climate and vegetation type, the variables related to the continental biospheric carbon cycle, i.e. the carbon pools such as the phytomass, the litter and the soil organic carbon; and carbon fluxes such as net primary production, litter production and heterotrophic respiration. The modeled present-day biosphere is in good agreement with observation. The model is used to investigate the response of the terrestrial biosphere to climatic changes as predicted by different General Circulation Models (GCM). In particular, the impact on the biosphere of climatic conditions corresponding to the last glacial climate (LGM), 18 000 years ago, is investigated. Comparison with results from present-day climate simulations shows the high sensitivity of the geographical distribution of vegetation types and carbon content as well as biospheric trace gases emissions to climatic changes. The general trend for LGM compared to the present is an increase in low density vegetation types (tundra, desert, grassland) to the detriment of forested areas, in tropical as well as in other regions. Consequently, the biospheric activity (carbon fluxes and trace gases emissions) was reduced.     

Retrieval of heavy metal ions from solution via ferritisation

The paper summarises the results of the studies on retrieval of heavy metal ions in solution by ferritisation and its potential application in waste-water treatment. The optimum procedure for ferritisation of heavy metal ions in solution has been evolved with respect to pH, concentration of Fe2+, rate and time of aeration and temperature. The recommended procedure consists of controlled aeration of the solution containing heavy metal ions and ferrous ions at pH 9.5-10.5 at about 50 degrees C, until the black, granular, magnetic ferrite separates out. The metal ferrites can also be formed, even without heating or forced aeration, by ageing the mixed metal hydroxide precipitate at pH 10 to 11. The metal ferrites formed have been characterised by X-ray diffractometry. The laboratory-scope experiments conducted with synthetic heavy metal solutions as well as actual wastewater from a tanning industry showed that heavy metal ions can be effectively removed from solution to sub-ppm levels. The metal ferrites thus recovered may find commercial application as microwave absorbers, catalysts, metal scavengers, etc. This technique seems to have potential application in simultaneous, one step removal of different heavy metal ions from industrial wastewaters.     

Polycyclic aromatic compounds in Northwest Atlantic COD (Gadus morhua)

Twenty-seven polycyclic aromatic compounds (PAC) including polycyclic aromatic hydrocarbons (PAH) and polycyclic aromatic sulphur heterocycles were analysed in muscle, liver and ovaries of cod (Gadus morhua) from the Northwest Atlantic. These PAC include the 16 PAH priority pollutants (EPA recommendation), alkylated naphthalenes, phenanthrene-anthracenes as well as dibenzothiophenes (DBT). Aromatics were undetectable in muscle. One of the analysed PAC was detected in one ovary and six in another ovary sample. Liver samples contained between 1 and 9 PAC. Of the parental PAH, only acenapthene (18 ng/g, dry weight), fluorene (28 ng/g) and chrysene (22 ng/g) were detected once each in two liver samples, while fluorene (72 ng/g) was detected once in one of the ovaries. C-2 DBT was the major component in ovaries and liver (8-86 ng/g), while C-3 and C-4 alkylated phenanthrene-anthracene (12-78 ng/g) were the next major components detected in the liver samples. This is the first detailed study of PAH and PAC in finfish from the Northwest Atlantic.     

Simulation of pesticide runoff at Rosemaund Farm (UK) using the SoilFug model

A validation exercise of the SoilFug model using field runoff data from Rosemaund Farm (UK) is described. A comparison has been made of modelled and measured concentrations of several pesticides in surface water and soil during and after specific rain events following application. The field experiments were designed to obtain data on rainfall, outflows of water, pesticide application rates and concentrations in soil and water. The results were satisfactory for the undissociated pesticides (atrazine, carbofuran, dimethoate, isoproturon, lindane, simazine and trifluralin), whose concentrations in water were mostly predicted within an order of magnitude of measured data. The results for the dissociated pesticides (dichlorprop, MCPA, mecoprop) were less satisfactory, giving generally much higher predicted concentrations in water. The use of the SoilFug model is suggested for the calculation of predicted environmental concentrations (PECs) in water, since it generally produces acceptable results from a relatively small set of input data, most of which is generally available.     

Algal-bacterial interactions in metal contaminated floodplain sediments

The aim of the present study was to investigate algal-bacterial interactions in a gradient of metal contaminated natural sediments. By means of multivariate techniques, we related the genetic structure (denaturing gradient gel electrophoresis, DGGE) and the physiological structure (community-level physiological profiling, CLPP) of the bacterial communities to the species composition of the algal communities and to the abiotic environmental variables, including metal contamination. The results revealed that genetic and physiological structure of the bacterial communities correlated with the species composition of the algal community, but hardly to the level of metal pollution. This must be interpreted as an indication for a strong and species-specific linkage of algal and bacterial species in floodplain sediments. Metals were, however, not proven to affect either the algal or the bacterial communities of the Dutch river floodplains.     

Do differences between metal body residues reflect the differences between effects for Chironomus riparius exposed to different sediments?

Sediment characteristics are well known to interfere with toxicity, mainly through differences in terms of bioaccumulation. Here, with chironomids exposed to zinc in an artificial and a field sediment, we investigated the differences of zinc accumulation and of effects on the life cycle, at individual and population level. We used biology and energy-based modeling to analyze the data at all the levels of biological organization. This permits a reliable estimation of thresholds values for tissue residues. Differences in zinc tissue residues accounted for most of the differences between the results for both sediments (a factor of 11 for differences from 20 to 100 depending on the parameter which is considered). Taking into account accumulation and background variability, the differences relative to thresholds could be accounted for. However, it appeared that, once the threshold was passed, effects were much more pronounced for organisms exposed to artificial sediment compared to field sediment. We concluded that some sediment characteristics can enhance toxicity, in addition to their influence on the compound accumulation, even if the latter was the major source of differences in our study.     

Testing the use of juvenile Salmo trutta L. as biomonitors of heavy metal pollution in freshwater

Individual specimens of Salmo trutta were captured, from four sampling sites in Galician rivers (NW Spain) affected by different types of contamination: diffuse urban waste, run-off from an unrestored dump at a copper mine and waste from a fish farm. The ages of the captured trouts were established and only those belonging to the 1+ age class were selected for study. The liver and kidney were removed from each fish and analysed to determine the tissue concentrations of Cu, Fe and Zn. The results obtained showed that: (i) the use of 1+ individuals allowed differentiation of contamination scenarios on the basis of the tissue concentrations of metal; (ii) the use of 1+ individuals allowed standardization of the time of exposure, which was sufficiently long for differential uptake to have taken place; (iii) liver tissue provided the best results as, less effort was required than for processing kidney tissue, and significant differences between sampling sites were detected because the intrapopulational variability in metal levels was lower than for kidney, and (iv) the levels of elements detected were not affected by basal tissue concentrations or residual concentrations due to past contamination, which older trouts may have been exposed to. In addition, the use of 1+ trout may provide better results in annual environmental sampling surveys.