Influence of reagent purity on the ion chromatographic determination of bromate in water using 3,3'-dimethoxybenzidine as a prochromophore for photometric detection

Variable availability of the purified dihydrochloride salt of 3,3'-dimethoxybenzidine (DMB; ortho-dianisidine) led us to investigate the effects of reagent purity on the analytical results obtained when this reagent is used in the photometric determination of the disinfection byproduct bromate. After analyte ions are separated by ion chromatography, a solution of DMB (post-column reagent) is added to the eluate and the DMB is oxidized, thereby producing a chromophore detected by its absorbance. Although some commercial products of undefined grade performed well, others did not. Variability was also observed between lots of purified material. Sensitivity at low concentrations (< 5 micrograms L-1 BrO3-) varied by a factor of up to 10. In some cases, the lower limit of detection for photometric detection was greater than that obtained using conductivity detection, as high as 5-7 micrograms L-1 BrO3-. An impurity or several impurities are suspected to be responsible for deviations from linearity at low analyte concentrations. This investigation underscores the need for ensuring reagent purity in environmental analyses. Ideally, chemical manufacturers will meet the needs of analytical chemists who test potable water and begin producing a high grade material in sufficient quantities to meet monitoring requirements. The establishment of third-party standards for a spectrophotometric grade of DMB.2HCl would be helpful in ensuring that a variety of manufacturers could supply products of uniformly high quality that would be suitable for the measurement of bromate in public drinking water supplies.     

Climate change and Ontario forests: Prospects for building institutional adaptive capacity

Institutions play an important role in the adaptive capacity of a system in responding to climate change. This review paper characterizes the status of the collective institutional response (government, industry, First Nation, community, civil society) to climate change in the forest sector of the Canadian province of Ontario, and highlights the presence and nature of inter-institutional networks as part of the response. Based on a synthesis of the commonalities in the public administration and policy literature on tackling wicked problems, and the resilience literature, inter-institutional networks, which foster exchange of different types of knowledge, are an important aspect of enhancing the adaptive capacity of social–ecological systems such as the forest sector. Based on a content analysis of publicly available documents and insights gained from representatives of government, community members and non-governmental organizations, mitigation and adaptations strategies are described. At the provincial level there have been some new innovations in inter-institutional networks, but expansion of the forest stakeholders involved in such networks would further enhance adaptive capacity. In particular, it is important to network with First Nations and other forest-dependent communities who have a heightened vulnerability to climate change. The presence of a collaborative capacity builder could foster the transfer, receipt and integration of knowledge across the networks, and ultimately build long-term collaborative problem-solving capacity in the Ontario forest sector.

Walking routes to school in new urban and suburban neighborhoods: An environmental walkability analysis of blocks and routes

We assessed environmental and perceptual correlates of walking and walkability for fifth graders from three communities attending two schools: A new urban/LEED-ND pilot community, mixed, and standard suburban community. Irvine-Minnesota Inventory (IMI) walkability audits showed that new urban blocks provided more traffic safety, pleasurability, crime safety, density, and diversity. New urban routes offered greater traffic safety, accessibility, pleasurability, crime safety, and diversity, but suburban routes had greater housing density, net of controls (parental education, rooms in the home, home ownership, parent preference for child to walk to school). Parents and children perceived new urban routes to be more walkable and children walked more when they lived on more walkable routes. The suburban hierarchical street design exposed children to varied traffic safety conditions by funneling their walks from cul-de-sacs to arterials. The new urban routes to a centrally located school passed by pleasant open spaces, suggesting how community organization can create better walking conditions.     

Nutrient bioassimilation capacity of aquacultured oysters: quantification of an ecosystem service

Like many coastal zones and estuaries, the Chesapeake Bay has been severely degraded by cultural eutrophication. Rising implementation costs and difficulty achieving nutrient reduction goals associated with point and nonpoint sources suggests that approaches supplemental to source reductions may prove useful in the future. Enhanced oyster aquaculture has been suggested as one potential policy initiative to help rid the Bay waters of excess nutrients via harvest of bioassimilated nutrients. To assess this potential, total nitrogen (TN), total phosphorous (TP), and total carbon (TC) content were measured in oyster tissue and shell at two floating-raft cultivation sites in the Chesapeake Bay. Models were developed based on the common market measurement of total length (TL) for aquacultured oysters, which was strongly correlated to the TN (R2 = 0.76), TP (R2 = 0.78), and TC (R2 = 0.76) content per oyster tissue and shell. These models provide resource managers with a tool to quantify net nutrient removal. Based on model estimates, 10(6) harvest-sized oysters (76 mm TL) remove 132 kg TN, 19 kg TP, and 3823 kg TC. In terms of nutrients removed per unit area, oyster harvest is an effective means of nutrient removal compared with other nonpoint source reduction strategies. At a density of 286 oysters m(-2), assuming no mortality, harvest size nutrient removal rates can be as high as 378 kg TN ha(-1), 54 kg TP ha(-1), and 10,934 kg TC ha(-1) for 76-mm oysters. Removing 1 t N from the Bay would require harvesting 7.7 million 76-mm TL cultivated oysters.     

The ecological impact of invasive cane toads on tropical snakes: field data do not support laboratory-based predictions

Predicting which species will be affected by an invasive taxon is critical to developing conservation priorities, but this is a difficult task. A previous study on the impact of invasive cane toads (Bufo marinus) on Australian snakes attempted to predict vulnerability a priori based on the assumptions that any snake species that eats frogs, and is vulnerable to toad toxins, may be at risk from the toad invasion. We used time-series analyses to evaluate the accuracy of that prediction, based on >3600 standardized nocturnal surveys over a 138-month period on 12 species of snakes and lizards on a floodplain in the Australian wet-dry tropics, bracketing the arrival of cane toads at this site. Contrary to prediction, encounter rates with most species were unaffected by toad arrival, and some taxa predicted to be vulnerable to toads increased rather than declined (e.g., death adder Acanthophis praelongus; Children's python Antaresia childreni). Indirect positive effects of toad invasion (perhaps mediated by toad-induced mortality of predatory varanid lizards) and stochastic weather events outweighed effects of toad invasion for most snake species. Our study casts doubt on the ability of a priori desktop studies, or short-term field surveys, to predict or document the ecological impact of invasive species.     

An energetic perspective on the relationship between disturbance and ecosystem productivity

Previous ecological models for disturbance from energetic perspectives have focused on destructive pulses by which storages in a system are quickly drained during disturbance events and recovered thereafter. However, considering the wide range of disturbance intensities, frequencies, and durations in nature, disturbance effects on ecosystem energetics would be better understood by diversifying the disturbance effects on specific system configurations or energy pathways. Based on two hypotheses, we built simulation models of the variable disturbance-productivity relationships observed in a freshwater aquatic microcosm study. First, we hypothesized that disturbances will differentially alter the intrinsic rates of energy pathways in a system. Second, we hypothesized that there is a disturbance threshold where response of the intrinsic rates changes abruptly. Simulation results showed variable patterns of gross primary productivity (GPP) during the disturbance and post-disturbance periods under the diverse scenarios of disturbance effects on the intrinsic rates. Simulation results confirmed that the second hypothesis (i.e., disturbance threshold) was essential to achieve a U-shaped or peaked disturbance-productivity relationship. We evaluated the models by comparing them with the results of the microcosm tests, and suggested possible mechanisms of the variable disturbance-productivity relationships by varying parameters related to the disturbance effects on the intrinsic rates and the disturbance thresholds.     

A CFD-based wind solver for an urban fast response transport and dispersion model

In many cities, ambient air quality is deteriorating leading to concerns about the health of city inhabitants. In urban areas with narrow streets surrounded by clusters of tall buildings, called street canyons, air pollution from traffic emissions and other sources may accumulate resulting in high pollutant concentrations. For various situations, including the evacuation of populated areas in the event of an accidental or deliberate release of chemical, biological and radiological agents, it is important that models should be developed that produce urban flow fields quickly. Various computational techniques have been used to calculate these flow fields, but these techniques are often computationally intensive. Most fast response models currently in use are at a disadvantage in these cases as they are unable to correlate highly heterogeneous urban structures with the diagnostic parameterizations on which they are based. In this paper, a novel variant of the popular projection method for solving the Navier–Stokes equations has been developed and applied to produce fast and reasonably accurate parallel computational fluid dynamics (CFD) solutions for flow in complex urban areas. This model, called QUIC-CFD represents an intermediate balance between fast (on the order of minutes for a several block problem) and reasonably accurate solutions. This paper details the solution procedure and validates this model for various simple and complex urban geometries.     

Derivation of transfer parameters for use within the ERICA Tool and the default concentration ratios for terrestrial biota

An ability to predict radionuclide activity concentrations in biota is a requirement of any method assessing the exposure of biota to ionising radiation. Within the ERICA Tool fresh weight whole-body activity concentrations in organisms are estimated using concentration ratios (the ratio of the activity concentration in the organism to the activity concentration in an environmental media). This paper describes the methodology used to derive the default terrestrial ecosystem concentration ratio database available within the ERICA Tool and provides details of the provenance of each value for terrestrial reference organisms. As the ERICA Tool considers 13 terrestrial reference organisms and the radioisotopes of 31 elements, a total of 403 concentration ratios were required for terrestrial reference organisms. Of these, 129 could be derived from literature review. The approaches taken for selecting the remaining values are described. These included, for example, assuming values for similar reference organisms and/or biogeochemically similar elements, and various simple modelling approaches.     

Field test of in situ soil amendments at the Tar Creek National Priorities List Superfund site

A range of soil amendments including diammonium phosphate fertilizer (DAP), municipal biosolids (BS), biosolids compost, and Al- and Fe-based water treatment residuals were tested on Pb-, Zn-, and Cd-contaminated yard soils and tailings at the Tar Creek NPL site in Oklahoma to determine if amendments could restore a vegetative cover and reduce metal availability in situ. For the yard soils, all amendments reduced bioaccessible (assessed with a physiologic-based extraction method) Pb, with reductions ranging from 35% (BS+Al, DAP 0.5%, DAP+Compost+Al) to 57% (Compost+Al). Plant Zn (Cynadon dactylon L.) and NH4 NO3-extractable Cd and Zn were also reduced by a number of amendments. For the tailings, all amendments excluding BS reduced bioaccessible Pb, with the largest reductions observed in the DAP 3% and DAP3%+BS treatments (75 and 84%). Plant growth was suppressed in all treatments that contained DAP for the first season, with the highest growth in the treatments that included compost and biosolids. In the second year, growth was vigorous for all treatments. Plant Zn and Cd and extractable metal concentration were also reduced. A number of treatments were identified that reduced bioaccessible Pb and sustained a healthy plant with reduced metal concentrations. For the yard soil, Compost+Al was the most effective treatment tested. For the tailings, BS+DAP 1% was the most effective treatment tested. These results indicate that in situ amendments offer a remedial alternative for the Tar Creek site.