Elimination of VOC Emissions from Surface Coating Operations

Collectively, surface coating operations using paints with hydrocarbon solvents may well be the largest industrial source of volatile organic compounds (VOC) and hazardous air pollutants (HAP). Most surface coating operations involve the manual application of paint with spray equipment inside a paint spray booth. The booth exhaust system collects the solvent fumes and then exhausts them through a stack to the atmosphere. Stack emissions are characteristically high in flow rate and low in concentration. Since control equipment is sized based on exhaust flow rate rather than concentration, control of VOC and HAP requires large, expansive abatement equipment. Simple, effective designs employing recycling of air have greatly reduced the exhaust flow rate and the cost of the control equipment. However, these designs are not popular because they are burdened by various flaws, notably worker endangerment. The Mobile Zone recirculation system can be incorporated into new construction or retrofitted to existing spray booths and will reduce the exhaust volumes ranging from 65 to 95 percent without adversely affecting the production rate, production quality or worker safety.     

Massive and distinctive effects of meadow voles on grassland vegetation

We ask whether vole herbivory in experimental grassland plots is sufficient to create an unpalatable community. In a six-year experiment, meadow voles (Microtus pennsylvanicus) reduced plant standing crop between 30% and 72%, well within the range of ungulate effects. Moreover, meadow voles reduced their available forage species by changing the plant community composition: four grass species and a legume upon which they foraged declined sharply in cover and/or number of individuals, five forbs avoided by voles increased, and two forbs neither declined nor increased with either measure. Reductions of diversity occurred when voles first defoliated the plots in 2000 but disappeared as plant species avoided by voles replaced vulnerable plants. Within six years, meadow voles created plant communities dominated by species that they did not eat.     

Molecular evidence for benzo[a]pyrene and naphthalene genotoxicity in Trifolium repens L

Polycyclic aromatic hydrocarbons (PAHs) are among the most dangerous environmental contaminants due to their toxic, carcinogenic and mutagenic effects. Although there are many data in literature that detail the effects of PAHs on animals, little is known about their action on higher plants which are often used as bioindicators. The aim of the present study was to evaluate the genotoxicity of two different PAHs, benzo[a]pyrene (BaP) and naphthalene (Naph), on Trifolium repens L. Clover plants were exposed to soil which had been artificially contaminated with three concentrations of BaP (5, 10 and 20 microg g-1) or Naph (25, 50 and 100 microg g-1). After 15 days, changes in the DNA content and sequence of roots and shoots were evaluated by flow cytometry (FCM) and amplified fragment length polymorphism (AFLP). Root and shoot dry weight were also determined to assess plant growth. Results showed that BaP and Naph were both genotoxic for white clover, inducing significant changes in root and shoot DNA sequence. Damage was more severe in the root than in the shoot suggesting that the translocation of these compounds and their genotoxic metabolites was limited. Ploidy alterations were not detected and the extent of damage caused by all the tested PAH concentrations was not sufficient to affect plant development.     

Comparative assessment of coal tars obtained from 10 former manufactured gas plant sites in the eastern United States

A comparative analysis was performed on eleven coal tars obtained from former manufactured gas plant sites in the eastern United States. Bulk properties analyzed included percent ash, Karl Fisher water content, viscosity and average molecular weight. Chemical properties included monocyclic- and polycyclic-aromatic hydrocarbon (PAH) concentrations, alkylated aromatic concentrations, and concentrations of aliphatic and aromatic fractions. It was found that there was at least an order-of-magnitude variation in all properties measured between the eleven coal tars. Additionally, two coal tars obtained from the same manufactured gas plant site had very different properties, highlighting that there can be wide variations in coal tar properties from different samples obtained from the same site. Similarities were also observed between the coal tars. The relative chemical distributions were similar for all coal tars, and the coal tars predominantly consisted of PAHs, with naphthalene being the single-most prevalent compound. The C(9-22) aromatic fraction, an indicator of all PAHs up to a molecular weight of approximately 276 gmole(-1), showed a strong power-law relationship with the coal tar average molecular weight (MW (ct)). And the concentrations of individual PAHs decreased linearly as MW (ct) increased up to ca. 1000 gmole(-1), above which they remained low and variable. Implications of these properties and their variation with MW (ct) on groundwater quality are discussed. Ultimately, while these similarities do allow generalities to be made about coal tars, the wide range of coal tar bulk and chemical properties reported here highlights the complex nature of coal tars.     

Requirements of future models for inhabited areas

Models for inhabited areas are used in a variety of applications for accidental or continuous releases of radioactivity to atmosphere. Pathways of interest are external exposure from radioactive material in the cloud or deposited on indoor and outdoor surfaces and people, inhalation from the plume and from material resuspended from the ground. In developing a model for inhabited areas it is necessary to consider what the end users may need and ensure that the model is appropriate for the application; different levels of detail may be appropriate for different applications. This paper considers the main processes governing exposure in inhabited areas, commenting on the extent to which we understand them and how well current models reflect this understanding. It also identifies where the authors believe future modelling is needed and the key areas where the current inhabited area models could be improved.     

The derivation of radionuclide transfer parameters for and dose-rates to an adult ringed seal (Phoca hispida) in an Arctic environment

Radionuclide transfer parameters and dose-rates for an adult ringed seal from Svalbard have been determined based on empirical and estimated tissue activity concentrations and detailed dietary and habitat information. Whole-body equivalent concentration factors determined for anthropogenic radionuclides ranged from 10(1) ((90)Sr) to 10(2) ((137)Cs, (238)Pu and (239,240)Pu), while natural radionuclides ranged from 10(2) ((210)Pb) to 10(4) ((210)Po). Employing a dietary composition of 40% fish, 40% zooplankton and 20% benthic invertebrates, a whole-body biological half-life of 29 days was derived for (137)Cs. A total dose-rate of approximately 0.19microGyh(-1) (1.7mGya(-1)) was derived for an adult ringed seal; this dose-rate is virtually entirely attributable to the internal components of (210)Po and (40)K. The dose-rates associated with the presence of anthropogenically derived radionuclides in the present assessment fall many orders of magnitude below the dose-rates at which any biological effects would be expected.     

Soil-dependent uptake of 137Cs by mushrooms: experimental study in the Chernobyl accident areas

The influence of agrochemical properties of forest soils and growth conditions on 137Cs aggregated transfer factors from soil to different species of forest mushrooms have been analysed. Statistically significant correlations between 137Cs soil to mushroom aggregated transfer factors and agrochemical soil properties have been revealed. The experimental data show that 137Cs aggregated transfer factors depend on the mushroom's trophic group, biological family, genus and species. They also strongly depend on forest soil properties and their values can be estimated with the use of multiple regression equations constructed from agrochemical soil parameters which most closely correlate with the 137Cs transfer parameters for particular mushroom groups.