Natural Weathering Studies of Polypropylene

Polypropylene (PP) has achieved a dominating position and hence, their consumption increases thereby littering, which lead to environmental pollution. Photodegradation seems to be a better choice because of naturally available sunlight as energy source for degradation. The present work involves the study of the variation of degradation behavior of PP film during tropical summer and winter seasons. The photodegradation is followed by Fourier transform infrared (FTIR) spectroscopic technique. Various indices like hydroxyl, carbonyl, vinylidene, lactones, ester, carboxylic acid and crystallinity are calculated and these values increased after a brief induction period. The variation in the mechanical properties like tensile strength and elongation at break percentages are determined. The scanning electron microscopic (SEM) images of weathered PP showed surface cracks when carbonyl index value increases sharply and the mechanical properties show a sudden decrease. Attempted life time prediction using mathematical models showed that the carbonyl growth is more affected by ultraviolet (UV) and cumulative total solar radiation for PP weathered during summer. The loss in tensile strength of PP weathered during summer is more dependent on the average temperature and the UV portion of the total solar radiation whereas, intensity of UV radiation has profound effect on the tensile strength of PP weathered during winter.     

A note on the effectiveness of the house-arrest alternative for motivating DWI offenders to install ignition interlocks

Introduction

The effectiveness of ignition interlocks at reducing drunk driving has been limited by the ability of driving-while-intoxicated (DWI) offenders to avoid court orders to install the devices.

Methods

In a pilot program in New Mexico, four Santa Fe County judges imposed home confinement (via electronic monitoring bracelets) on offenders who claimed to have no car or no intention to drive. Interlock installation rates for Santa Fe County were compared with all other counties in New Mexico over a 2-year program and 2-year post-program period.

Results

During the two program years, 70% of the drivers convicted of DWI in Santa Fe County installed interlocks, compared to only 17% in the other counties, but when the program was terminated, the Santa Fe installation rate fell by 18.8 percentage points.

Summary

Mandating the alternative sanction of house arrest led to the highest reported interlock installation rate for DWI offenders.

Impact on Industry

Impaired driving is a substantial expense to employers, particularly when it bars driving that interferes with employment. Interlocks provide a method of protecting the public while permitting the offender to drive sober. This study was directed at increasing interlock use by DWI offenders.     

Valuing lives equally in a benefit-coast analysis of safety projects: A method to reconcile theory and practice

A value of statistical life (VSL) is used in cost-benefit analysis (CBA) as a monetary measure of the benefits to people from small risk reductions that arise from safety projects. Despite its widespread use in a number of countries, the concept of a VSL remains controversial, not least because it implies acceptance of the underlying ethical assumptions of CBA together with the idea that ‘social welfare’ can be measured and aggregated in some manner. In addition, to comply with theory, variable VSLs for different groups within society would be advocated. However, without fail, empirically, it is the case that those countries that employ a willingness to pay based approach to cost-benefit analysis of a safety project appraisal tend to use a single value for that accident context that is independent of the per capita income level, or indeed other personal characteristics, of the sub-group in society to which the safety improvement will actually apply. This article presents a straightforward, but theoretically justified adaptation to the calculation of a VSL which allows empirical practice by policymakers i.e. the application of a “common” VSL for any particular hazard within a given society, to be compatible with a CBA decision making approach.     

Collective work and resilience of complex systems

This article aims to describe the characteristics of collective working situations in complex systems – especially those in nuclear power plants – related to common forms of cooperation, in order to improve systems resilience. In addition, we will try to detail some aspects of collective working situations, emphasizing the differences between various forms of control. The similarities between work activities (multi-addressed messages, linkage to regulation, central and peripheral information) are nonetheless exposed. We conclude by proposing a contribution to support systems design, thus facilitating cooperation in teamwork activities.     

Pilot sample risk analysis for underground coal mine fires and explosions using MSHA citation data

After three decades of sustained continuous improvement of mine safety performances in the US, mine disasters in 2006 and 2007 compromised an excellent record and presented new challenges and vulnerabilities for the underground coal mining industry. In the aftermath of the incidents, formal investigations and new scrutiny of mine safety by the US Congress and expert study groups followed. The US Congress passed the Mine Improvement and New Emergency Response Act of 2006 (MINER Act), which mandated new laws to address the issues, including those related to mine fires and explosions from which miners must be protected. The National Mining Association-sponsored Mine Safety Technology and Training Commission report highlighted the role of risk analysis and management in identifying and controlling major hazards, such as fires and explosions. In this paper an approach is given for analyzing the risks for fires and explosions based on the Mine Safety and Health Administration citation database. Using 2006 citation data and focusing on subsystem failures, the methodology is applied to a database for a pilot sample of underground coal mines stratified by mine size and state.     

Focus on mission success: Process safety for the Atychiphobist

Modern process plants are complex engineering systems. While thorough reviews of system safeguards are performed, catastrophic events continue to occur, often unfolding in unforeseen ways. Success in process safety demands safe processes, and understanding rare, high consequence events is central to the traditional process safety approach. This philosophy is common to all high-hazard industries, offering the potential for sharing approaches, experience, and lessons learned. The problem, however, is that people (and organizations and entire industries) who fear failure (atychiphobia) sometimes obsess about failure so much that they miss opportunities to succeed.This paper examines selected risk management practices in the power generation and aerospace industries and how those practices have led to improved performance. Risk informed decision making (RIDM) has had widespread application in the nuclear and aerospace industries, and is undergoing enhancements to become a key framework for risk management. Additionally, rather than focusing on avoidance of loss, there are emerging approaches supporting achievement of success. This approach provides a more direct link of risk to business and operational objectives, but does challenge conventional risk approaches founded in a loss prevention-centric view. The paper reflects upon risk informed decision making and success modeling, and suggests how these methods may be applied in the field of process safety. Specific examples are drawn from the defense in depth approach from the nuclear power industry and mission success concepts developed for NASA.     

Low-dose irradiation by electron beam for the treatment of high-SOx flue gas on a semi-pilot scale—Consideration of by-product quality and approach to clean technology

Attention has been focused on the treatment of lignite-fired flue gas in order to use lignite in an environmentally friendly way – (i) low-CO₂ emission, (ii) production of a valuable by-product, (iii) no discharge of wastewater, (iv) direct removal of SO₃ (strong toxicity), and (v) treatment of high SO₂ concentration. Based on these criteria, electron beam irradiation with ammonia injection was tested on a semi-pilot scale: 800 Nm³ h^?1 flow rate, 5500 ppm SO₂, 70 ppm NO_x, 22% flue gas moisture, and 75–80 °C at the reactor outlet.As an energy-saving measure, a low dose (5 kGy) of irradiation was applied: the problem lay in the by-product quality. It is considered that (NH₄)₂SO₃ and NH₄HSO₃ produced by thermal reactions are oxidized to form (NH₄)₂SO₄ (fertilizer) by an electron beam. However, not all reactions were complete because the by-product contained small amounts of H₂SO₄ and NH₂SO₃NH₄ (herbicide), so a vegetable pot test was performed to study the by-product quality: no adverse effect was observed. It is inferred from the pot test that slightly acidic soil may protect vegetables from disease and a small amount of NH₂SO₃NH₄ probably affects woody species and not herbaceous species.It is concluded that the electron beam system is noted as a multi-component pollution control process (removal of NO_x, SO₃, SO₂ and dioxins) and this system will contribute to environmentally friendly use of lignite as well as agricultural productivity via fertilizer supply.     

Nanofiltration of concentrated and salted tuna cooking juices

Tuna cooking juice from a Tunisian tuna-processing unit has a high level of polluting load: chemical oxygen demand (COD) is comprised between 4 and 20 g L⁻¹, nitrogen kjedahl (NK) between 0.6 and 3 g L⁻¹ and dry matter between 120 and 160 g L⁻¹. The juice has thus to be treated before being rejected into the environment. This paper considers the nanofiltration (NF) of these concentrated organic/inorganic mixtures using an AFC 30 (NF) membrane. The work focusses on the effect of organic and inorganic matters on the permeate flux and rejections of these matters. For this purpose, mixtures of salt and organic pollution (COD), used as model solutions, were prepared by the dilution of a typical industrial tuna cooking juice. The permeate flux was found to decrease when salt and organic matter concentrations increase. The recovery rate in organic matter decreases with increasing salt or organic matter content and the recovery rate of salt decreases when the COD concentration increases.     

Physico-Chemical Quality of Drinking Water in Rohtas District of Bihar

Water Quality Survey of Rohtas district of Bihar was conducted. Samples were collected from differentsources and analysed. 209 samples were collectedfrom 196 villages. Results of water quality surveyidentified the problem areas in respect of high iron,manganese, fluoride, nitrate and brackishness of water in the district.     

Characterisation of Particulate Matter Sampled during a Study of Children's Personal Exposure to Airborne Particulate Matter in a UK Urban Environment

The personal exposure of children aged 9 – 11 years to particulate matter (PM₁₀ and PM_2.5) was carried out between January and September 1997 in the London Borough of Barnet. Personal sampling along with home, garden and classroom microenvironmental monitoring was completed for all ten children. Each child was monitored for five days during winter, spring and summer. All children completed daily time activity diaries to provide information on any potential activities that could influence their exposure to particulate matter. Each evening a household activity questionnaire was also completed by the parents. Personal Environmental Monitors were used to sample personal exposure to PM₁₀ and PM_2.5. Harvard Impactors were used for the microenvironmental sampling of both size fractions. The children's mean personal exposure concentrations for PM₁₀ during winter, spring and summer were 72, 54 and 35 µg/m³ respectively and for PM_2.5 22, 17 and 18 µg/m³ respectively. In order to determine the potential sources of particulate matter, analysis of the Teflon filters has been undertaken. The physical characteristics of the particles have been identified using Scanning Electron Microscopy. The relationships between personal exposure concentrations and the different microenvironments will be discussed.