Investigations on the sorption of a toxaphene model congener, the B7-1450, on marine sediments

Sorption is a natural process that takes place in sediments or soils and changes the mobility and availability of hydrophobic organic compounds, such as toxaphene pesticide in the environment. The sorption of the 2-exo,3-endo,5-exo,8,9,10,10-heptachlorobornane (B7-1450), used as a model compound of the toxaphene heptachlorobornane congeners found in sediments, was investigated for the first time through a series of batch sorption experiments. The losses of B7-1450 due to adsorption onto glass walls and to evaporation occurring during analytical treatment steps were corrected. The study showed that these specific losses ranged from 2% to 3.5% for the glass walls adsorption and can be as high as 15% for the evaporation treatment. The sorption coefficients, K(d) and K(oc), of B7-1450 could be overestimated by >30%, particularly for low-concentration samples, if the losses were not corrected. Loss correction equations were established, validated and applied to determine sorption coefficients for the B7-1450 congener. The K(oc) values for B7-1450 determined over a gradient of concentrations ranged from 3.5x10(4) to 6.5x10(4)mlg(-1), revealing a strong affinity of B7-1450 for marine sediments.     

Platinum,palladium, and rhodium deposition to the <Emphasis Type="Italic">Prunus laurus cerasus</Emphasis> leaf surface as an indicator of the vehicular traffic pollution in the city of Varese area

Background, aim, and scope  

The widespread use of some platinum group elements as catalysts to minimize emission of pollutants from combustion engines produced a constantly growing increase of the concentration of these elements in the environment; their potential toxicological properties explain the increasing interest in routine easy monitoring. We have found that leaves of Prunus laurus cerasus are efficient collectors of particulate with a dimension <60–80 μm, and a simple and reliable procedure was developed to reveal traces of platinum, palladium, and rhodium released from automotive catalysts. The analysis of the dust deposited on the foliage is a direct indicator of traffic pollution.     

Effects of acetaminophen in oxidative stress and neurotoxicity biomarkers of the gastropod Phorcus lineatus

Environmental Science and Pollution Research - The growing use of pharmaceutical drugs has become a major environmental issue considering that these substances (or their metabolites) end up...     

Effects of paracetamol on the polychaete Hediste diversicolor: occurrence of oxidative stress,cyclooxygenase inhibition and behavioural alterations

Environmental Science and Pollution Research - Pharmaceuticals are significant environmental stressors, since they are utilized around the world; they are usually released in to the aquatic system...     

Effects of cobalt doping on the reactivity of hausmannite for As(III) oxidation and As(V) adsorption

Hausmannite is a common low valence Mn oxide mineral, with a distorted spinel structure, in surficial sediments. Although natural Mn oxides often contain various impurities of transitional metals (TMs), few studies have addressed the effect and related mechanism of TM doping on the reactivity of hausmannite with metal pollutants. Here, the reactivity of cobalt (Co) doped hausmannite with aqueous As(III) and As(V) was studied. Co doping decreased the point of zero charge of hausmannite and its adsorption capacity for As(V). Despite a reduction of the initial As(III) oxidation rate, Co-doped hausmannite could effectively oxidize As(III) to As(V), followed by the adsorption and fixation of a large amount of As(V) on the mineral surface. Arsenic K-edge EXAFS analysis of the samples after As(V) adsorption and As(III) oxidation revealed that only As(V) was adsorbed on the mineral surface, with an average As-Mn distance of 3.25–3.30 Å, indicating the formation of bidentate binuclear complexes. These results provide new insights into the interaction mechanism between TMs and low valence Mn oxides and their effect on the geochemical behaviors of metal pollutants.     

Environmental sampling of volatile organic compounds during the 2018 Camp Fire in Northern California

Trace analysis of volatile organic compounds (VOCs) during wildfires is imperative for environmental and health risk assessment. The use of gas sampling devices mounted on unmanned aerial vehicles (UAVs) to chemically sample air during wildfires is of great interest because these devices move freely about their environment, allowing for more representative air samples and the ability to sample areas dangerous or unreachable by humans. This work presents chemical data from air samples obtained in Davis, CA during the most destructive wildfire in California's history - the 2018 Camp Fire – as well as the deployment of our sampling device during a controlled experimental fire while fixed to a UAV. The sampling mechanism was an in-house manufactured micro-gas preconcentrator (µPC) embedded onto a compact battery-operated sampler that was returned to the laboratory for chemical analysis. Compounds commonly observed in wildfires were detected during the Camp Fire using gas chromatography mass spectrometry (GC–MS), including BTEX (benzene, toluene, ethylbenzene, m+p-xylene, and o-xylene), benzaldehyde, 1,4-dichlorobenzene, naphthalene, 1,2,3-trimethylbenzene and 1-ethyl-3-methylbenzene. Concentrations of BTEX were calculated and we observed that benzene and toluene were highest with average concentrations of 4.7 and 15.1 µg/m³, respectively. Numerous fire-related compounds including BTEX and aldehydes such as octanal and nonanal were detected upon experimental fire ignition, even at a much smaller sampling time compared to samples taken during the Camp Fire. Analysis of the air samples taken both stationary during the Camp Fire and mobile during an experimental fire show the successful operation of our sampler in a fire environment.     

Assemblage shift following population collapse of a non-indigenous bivalve in an urban lagoon

The quahog Mercenaria mercenaria has been introduced repeatedly to the Pacific coast of North America, but only one population is known to have become established. In the 1970s, the population of M. mercenaria at Colorado Lagoon, in Los Angeles County, California (33^o46′16″N, 118^o08′05″W), was estimated at more than 300,000 individuals. To determine the current status of this non-indigenous species (NIS), in 2009, we sampled 57 intertidal and 20 shallow subtidal plots, identifying and quantifying collected bivalves. No quahogs were found among the 2,490 living bivalves in our plots, though two were found intertidally outside of our plots. The M. mercenaria population has thus collapsed since 1980, but the native community has not recovered. Six of the fourteen living bivalve species we encountered were NIS; three are new records for the location, including the clam Venerupis philippinarum, which made up 87.6% of collected individuals. Though M. mercenaria is likely on its way to extinction on the US Pacific coast, the bivalve assemblage at this location remains heavily dominated by NIS.     

Bias from two analytical laboratories involved in a long-term air monitoring program measuring organic pollutants in the Arctic: a quality assurance/quality control assessment

Initiated in 1992, air monitoring of organic pollutants in the Canadian Arctic provided spatial and temporal trends in support of Canada's participation in the Stockholm Convention of Persistent Organic Pollutants. The specific analytical laboratory charged with this task was changed in 2002 while field sampling protocols remained unchanged. Three rounds of intensive comparison studies were conducted in 2004, 2005, and 2008 to assess data comparability between the two laboratories. Analysis was compared for organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) in standards, blind samples of mixed standards and extracts of real air samples. Good measurement accuracy was achieved for both laboratories when standards were analyzed. Variation of measurement accuracy over time was found for some OCPs and PCBs in standards on a random and non-systematic manner. Relatively low accuracy in analyzing blind samples was likely related to the process of sample purification. Inter-laboratory measurement differences for standards (<30%) and samples (<70%) were generally less than or comparable to those reported in a previous inter-laboratory study with 21 participating laboratories. Regression analysis showed inconsistent data comparability between the two laboratories during the initial stages of the study. These inter-laboratory differences can complicate abilities to discern long-term trends of pollutants in a given sampling site. It is advisable to maintain long-term measurements with minimal changes in sample analysis.