Correlation of PCDD/F and PCB concentrations in soil samples from the Swiss soil monitoring network (NABO) to specific parameters of the observation sites

Concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) and polychlorinated biphenyls (PCB) were determined in 23 soil samples collected at reference sites of the Swiss national soil monitoring network (NABO). Total PCDD/F and PCB concentrations are well correlated and proportional (R2=0.720). The total PCDD/F levels were between 72 and 703 ng/kg corresponding to 1.1-11 ng I-TEQ/kg, total PCB concentrations (sum of seven congeners IUPAC no. 28, 52, 101, 118, 138, 153, and 180) were from 1.1 to 12 microg/kg. In all samples, the PCDD/F and PCB concentrations were in the range of background levels for these contaminants in Central Europe. Ninteen samples revealed PCDD/F levels below the guide value of 5 ng I-TEQ/kg set by the Swiss ordinance relating to impacts on the soil (OIS); concentrations for the remaining four samples were below the trigger value (20 ng I-TEQ/kg). All PCB concentrations were below the guide value of 100 microg/kg. The elevated PCDD/F and PCB levels in some of the samples originating from forested sites could be attributed to the scavenging effect of forest canopies for semivolatile organic compounds. This interpretation could be substantiated by the observed distortion of the congener and homolog patterns of PCDD/F and PCB which is characteristic for forested sites.     

Testing common sediment-porewater distribution models for their ability to predict dissolved concentrations of POPs in The Grenlandsfjords, Norway

This study compares in situ observed porewater concentration of persistent organic pollutants (POPs) with predictions by common solid-water phase distribution models. Bottom sediments were sampled in The Grenlandsfjords, Norway, and the interstitial porewater was isolated from the solids by centrifugation and filtration. Both phases were analysed for polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/F), polycyclic aromatic hydrocarbons (PAH), and organic carbon. Based on the sediments' solid phase content of POPs, organic carbon, and soot carbon, we used the organic matter partitioning (OMP), and also the soot and organic matter partitioning (SOMP) model to estimate the porewater concentration. The OMP model gave better agreement to observations than the SOMP model for both PCDD/Fs and PAHs. The observed concentration of the PCDD/Fs in the sediments' porewater was much higher than in the deep water of the fjord. The logarithm of the organic matter-water partitioning coefficent (log K(OC)) in the porewater had positive linear regression on the logarithm of the octanol-water partitioning coefficient (log K(OW)). The slope of the regression model was indistinguishable from 1, except for the PAHs as a group which had a slope less than 1. This contrasts to previous studies undertaken in The Grenlandsfjords water column, where the slopes were higher than 1 for PCDD/Fs, and the K(OC) were much higher than the K(OW). One explanation may be that the influence of POPs adsorption to soots decrease because competitive sorption by other compounds in the sediment are higher than in the water column. This indicates that the sorption isotherms for these POPs need better understanding in order to be applicable in both the water column and the porewater.     

Organic pollutants in compost and digestate. Part 2. Polychlorinated dibenzo-p-dioxins, and -furans, dioxin-like polychlorinated biphenyls, brominated flame retardants, perfluorinated alkyl substances, pesticides, and other compounds

Compost and digestate are important recycling fertilizers and have beneficial effects on soil parameters. However, they can contain significant amounts of organic pollutants. Here, the first comprehensive data set on dibenzo-p-dioxins and -furans (PCDD/F), dioxin-like polychlorinated biphenyls (DL-PCB), brominated flame retardants, perfluorinated alkyl substances (PFAS), pesticides, phthalates, nonylphenol and chlorinated paraffins (CP) in source-separated compost and digestate from Switzerland is presented (n = 3-18). The median summation 17PCDD/F and summation 12DL-PCB concentrations were at 3.2 ng I-TEQ kg(-1)dry weight (dw) and 3.0 ng WHO-TEQ kg(-1)dw, respectively. Brominated diphenyl ether 209 (BDE 209) accounted for 72% of the total polyBDE content (10 microg kg(-1)dw). Hexabromocyclododecane (HBCD) and tetrabromobisphenol A (TBBPA) levels were at 100 and 0.51 microg kg(-1)dw, respectively. PFAS were identified for the first time in compost and digestate (median concentration 6.3 microg kg(-1)dw, summation 21compounds). Out of 269 pesticides analysed, 30 fungicides, 14 herbicides, eight insecticides and one acaricide were detected. Di-(2-ethylhexyl)phthalate (DEHP) median concentration accounted for 280 microg kg(-1)dw and nonylphenol was below the detection limit of 1 mg kg(-1)dw. The sum of short and medium chain CP was between 90 and 390 microg kg(-1)dw. The concentrations observed were at or above the levels found in background soils, which are the main recipient of compost and digestate. Where actually applied, compost can contribute considerably to the total input of organic pollutants to the soil. However, on a total Swiss agricultural area base, inputs seem to be limited.     

Distribution of PCNs, PCBs, and other POPs together with soot and other organic matter in the marine environment of the Grenlandsfjords, Norway

The apparently dissolved concentration of polychlorinated naphthalenes (PCNs) and three planar polychlorinated biphenyls (pPCBs) were sampled and analysed in the water column of a marine fjord system. We also measured how much of these persistent organic pollutants (POPs) were associated with suspended particles. The field observations showed that an unexpectedly high portion of the pollutants were particle-associated. The factor of deviation from model predictions had positive linear regression on the soot carbon:particulate organic carbon ratio of the particles, and on estimates of the soot-water distribution coefficient for the PCNs. The spatial distribution of surface sediment concentrations of PCNs and polycyclic aromatic hydrocarbons (PAH) were found to consistently follow the sediment content of soot (f(SC)) to a larger extent than the bulk organic matter (f(OC)). There were no systematic differences in the strength of correlation of sediments concentrations of other POPs, i.e. octachlorostyrene and organochlorine pesticides with sediment concentration to f(SC) and f(OC). Mechanisms possible of generating these types of observations, e.g. adsorption to soot carbon in the marine particle, are discussed.     

Influence of activated charcoal amendment to contaminated soil on dieldrin and nutrient uptake by cucumbers

Activated charcoal (AC) amendments have been suggested as a promising, cost-effective method to immobilize organic contaminants in soil. We performed pot experiments over two years with cucumber (Cucumis sativus L.) grown in agricultural soil with 0.07 mg kg^?1 of weathered dieldrin and 0, 200, 400, and 800 mg AC per kg soil. Dieldrin fresh weight concentrations in cucumber fruits were significantly reduced from 0.012 to an average of 0.004 mg kg^?1, and total uptake from 2 to 1 μg in the 800 mg kg^?1 AC treatment compared to the untreated soil. The treatment effects differed considerably between the two years, due to different meteorological conditions. AC soil treatments did neither affect the availability of nutrients to the cucumber plants nor their yield (total fruit wet weight per pot). Thus, some important prerequisites for the successful application of AC amendments to immobilize organic pollutants in agricultural soils can be considered fulfilled.     

Testing the resistance of single- and multi-walled carbon nanotubes to chemothermal oxidation used to isolate soots from environmental samples

Quantification of natural and engineered carbon nanotubes (CNT) in the environment is urgently needed to study their occurrence and fate and to enable a proper risk assessment. Currently, such methods are lacking. Here, we tested the resistance of 15 structurally different CNTs to chemothermal oxidation at 375 °C (CTO-375), a method used to isolate soots from environmental samples. Depending on their structure, CNTs survived CTO-375 in proportions ranging from 26 to 93%. Standard addition of CNTs to soil and sediment yielded recoveries between 66 and 171%, demonstrating the capability of CTO-375 to isolate CNTs from complex environmental matrices. These data of pure and added CNTs correspond to recoveries obtained with “ordinary” soots under similar experimental conditions. Hence, soot fractions commonly isolated with CTO-375 from environmental matrices most probably encompass CNTs. Future work should attempt to enhance the method's selectivity, i.e., its capability to separate CNTs from other forms of soot.     

Fate of PCBs, PAHs and their source characteristic ratios during composting and digestion of source-separated organic waste in full-scale plants

Composting and digestion are important waste management strategies. However, the resulting products can contain significant amounts of organic pollutants such as polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs). In this study we followed the concentration changes of PCBs and PAHs during composting and digestion on field-scale for the first time. Concentrations of low-chlorinated PCBs increased during composting (about 30%), whereas a slight decrease was observed for the higher chlorinated congeners (about 10%). Enantiomeric fractions of atropisomeric PCBs were essentially racemic and stable over time. Levels of low-molecular-weight PAHs declined during composting (50-90% reduction), whereas high-molecular-weight compounds were stable. The PCBs and PAHs concentrations did not seem to vary during digestion. Source apportionment by applying characteristic PAH ratios and molecular markers in input material did not give any clear results. Some of these parameters changed considerably during composting. Hence, their diagnostic potential for finished compost must be questioned.     

Occurrence, behavior and effects of nanoparticles in the environment

The increasing use of engineered nanoparticles (NP) in industrial and household applications will very likely lead to the release of such materials into the environment. Assessing the risks of these NP in the environment requires an understanding of their mobility, reactivity, ecotoxicity and persistency. This review presents an overview of the classes of NP relevant to the environment and summarizes their formation, emission, occurrence and fate in the environment. The engineered NP are thereby compared to natural products such as soot and organic colloids. To date only few quantitative analytical techniques for measuring NP in natural systems are available, which results in a serious lack of information about their occurrence in the environment. Results from ecotoxicological studies show that certain NP have effects on organisms under environmental conditions, though mostly at elevated concentrations. The next step towards an assessment of the risks of NP in the environment should therefore be to estimate the exposure to the different NP. It is also important to notice that most NP in technical applications are functionalized and therefore studies using pristine NP may not be relevant for assessing the behavior of the NP actually used.     

PAH and PCB in soils of Switzerland--status and critical review

The surface soil concentrations (0-20 cm) of the Swiss soil monitoring network (NABO) with 105 observation sites representing all major land use types ranged for the sum of 16 EPA PAH (PAH(16)) from 32 to 8465 microg kg(-1) (median 163 microg kg(-1)), for benzo[a]pyrene (BaP) from 0.5 to 1129 microg kg(-1) (median 13 microg kg(-1)) and for the sum of seven IRMM PCB (PCB(7)) from 0.5 to 12 microg kg(-1) (median 1.6 microg kg(-1)). The legal guide values of Switzerland were exceeded for PAH(16) at only three and for BaP at two sites. The PCB(7) concentrations were clearly below any assessment value. The concentration ranges were overlapping between all land use types. Tendencies for higher concentrations were observed at urban and viticulture sites. The overall measurement precision at repeatability conditions ranged from 1 to 37% RSD for PAH(16), BaP and PCB(7). The median bias for the chemical analysis was around zero for PAH(16), +5% for BaP and -5% for PCB(7) with spreads ranging from less than -20% up to more than +30%. The PAH profiles were clearly dominated by phenanthrene. Stratification by land use revealed a prevalence of benzo[a]pyrene at urban and naphthalene at conservation sites. For PCB, the general congener rank order was PCB no. 153 > 138 > 101 > 180. From a broad correlation screening only PAH(16)/BaP (r = 0.88**) were relevant for practical soil protection. The extensive comparison with other studies was severely biased by the lack of harmonisation, especially concerning sampling depth, sampling support, analytical method and the sum calculation procedure.     

Critical evaluation of PAH source apportionment tools using data from the Swiss soil monitoring network

In this study a large dataset on the polycyclic aromatic hydrocarbon (PAH) content of Swiss soils was analysed to evaluate two source apportionment tools, i.e., characteristic PAH ratios/molecular markers and a linear mixing model. Population density and total organic carbon (TOC) content were identified by a multiple regression model as independently and positively influencing the PAH concentrations in Swiss background soil. Specifically, TOC was more strongly positively correlated with the sum of light PAH (naphthalene to phenanthrene) than with the sum of heavy PAH (anthracene to benzo[ghj]perylene), whereas population density was more strongly positively correlated with the sum of heavy PAH than with light PAH. In addition, the sum of the heavy PAH as well as the total sum correlated negatively with sample site altitude. It is therefore hypothesised that heavy PAH are less mobile, whereas light PAH were closer to equilibrium with TOC in the soil. Similar results were found for polychlorinated biphenyls (PCB). The characteristic ratios and molecular markers pointed to pyrogenic origin of PAH in Swiss background soil but did not allow for further differentiation of individual fuel contributions, even though attempts to take environmental fractionation processes into account were made. The comparison of three soil profiles identified with a linear mixing model from the pattern of 16 PAH with >300 PAH emission profiles from the literature suggested urban dust, wood combustion and binders from asphalt as PAH sources. However, also here, environmental fractionation processes probably obscured source characteristic PAH ratios and fingerprints, which thus need to be interpreted with caution.