Precipitator Gas Flow Distribution

An electrostatic precipitator, furnished on a 500-Mw tan-gentially-fired steam generator burning coal, was to collect 99.6% of the fly ash being generated in the furnace of this unit. Preliminary measurements indicated that the installation was not meeting its collection guarantee. Precipitator outlet flue dust distribution indicated that poor gas flow distribution might be one of the causes of the low performance. When observation ports were installed in the outlet flue to permit a direct visual evaluation of the problem, it was found that high velocity jets were present in the collecting electrodes, and that hopper sweepage was present. A model study along with velocity distribution measurements of the installation were authorized. Flow analysis indicated that the field and model correlated well. Extensive changes were made in the model, which eliminated or minimized the high velocity jets and hopper sweepage. After these changes were made in the field installation, it was able to achieve the required dust collection efficiency.     

A Technique for Respirable Sampling

The purpose of this paper is to describe instrumentation to aerodynamically size suspended particulates found in ambient air and to summarize results of field testing utilizing the new technique.

A four-stage, multiorifice high-volume fractionating impactor with backup filter, which can be operated as a component of the standard high-volume sampler, collects particulate matter in five separate aerodynamic size ranges: 7 micrometer (μm) or larger, 3.3 to 7 μm, 2.0 to 3.3 μm, 1.1 to 2.0 μm, and 0.01 to 1.1 μm.

Comparative field tests utilizing duplicate sampling techniques were conducted to determine the feasibility of using the size fractionator on a routine basis in field operations. Verification of the actual particle size separation was not undertaken; however, earlier tests utilizing laboratory-generated aerosols have been performed with satisfactory results.

The results of field tests indicate that the fractionator can be used to determine the aerodynamic size distribution of particulate matter. A glass fiber surface with a pH of 11.0 was found to adsorb atmospheric acid gases during sampling and thus gave erroneous mass concentration results when compared to the standard high-volume sampler. Glass fiber filters with a pH of 6.5 eliminated the acid gas adsorption.     

Isonychia spp. and macroinvertebrate community responses to stressors in streams utilizing the benthic in situ toxicity identification evaluation (BiTIE) method

Exposures of caged organisms in situ have proven to be a useful way to improve exposure realism and link to stressor effects in aquatic assessments of hazard or risk. A novel cage system, the benthic in situ toxicity identification evaluation (BiTIE), was developed for benthic macroinvertebrates (surrogate species, resident populations and communities) to separate low and high flow effects, and major chemical classes of stressors in streams. Three resin types were used to separate the chemical stressors in the streams Honey Creek and Little Beavercreek, Ohio, USA: Dowex Optipore (non-polar organics), zeolite (ammonia), and polywool (control). Isonychia spp. sensitivity was compared to Chironomus tentans, and no significant differences were found (p>0.05). Isonychia spp. growth (length) showed a stressor response in the zeolite treatments, and community testing revealed improved metric responses in the Dowex treatments. The BiTIE chamber system demonstrated stressor-response relationships using sublethal and multimetric endpoints.     

Fractionation and extractability of sulfur, iron and trace elements in sulfidic sediments

This study describes iron and sulfur fractionation, and the related extractability of selected trace elements (As, Cd, Cr, Cu, Ni, Pb and Zn) in estuarine sediments. The sediments were sulfidic, with moderately high concentrations of pore-water sulfide (200-600 micromol l(-1)) and acid-volatile sulfide (AVS; 9.9-129 micromol g(-1)). Pyrite-S concentrations increased with depth, with 63-251 micromol g(-1) at site W1 and 312-669 micromol g(-1) at site W2. The degree of sulfidisation was generally high (>80%), indicating that Fe may be limiting pyrite accumulation. The ratios of AVS to pyrite-S increased with sediment depth, as expected for the pyritisation of solid-phase AVS. Cadmium, Pb and Zn extractability in 1M HCl indicated that these elements are not significantly sequestered during pyritisation, whereas sequestration may be important for As, Cu and possibly Ni. Extractability trends for Cr suggest that diagenesis in sulfidic sediments may enhance Cr reactivity. Overall, replacement of AVS by pyrite during diagenesis may enhance the reactivity of Cd, Cr, Pb and Zn, whereas As, Cu and possibly Ni may be rendered less reactive.     

Comparing wildlife habitat suitability models based on expert opinion with camera trap detections

Expert knowledge is used in the development of wildlife habitat suitability models (HSMs) for management and conservation decisions. However, the consistency of such models has been questioned. Focusing on 1 method for elicitation, the analytic hierarchy process, we generated expert-based HSMs for 4 felid species: 2 forest specialists (ocelot [Leopardus pardalis] and margay [Leopardus wiedii]) and 2 habitat generalist species (Pampas cat [Leopardus colocola] and puma [Puma concolor]). Using these HSMs, species detections from camera-trap surveys, and generalized linear models, we assessed the effect of study species and expert attributes on the correspondence between expert models and camera-trap detections. We also examined whether aggregation of participant responses and iterative feedback improved model performance. We ran 160 HSMs and found that models for specialist species showed higher correspondence with camera-trap detections (AUC [area under the receiver operating characteristic curve] >0.7) than those for generalists (AUC < 0.7). Model correspondence increased as participant years of experience in the study area increased, but only for the understudied generalist species, Pampas cat (β = 0.024 [SE 0.007]). No other participant attribute was associated with model correspondence. Feedback and revision of models improved model correspondence, and aggregating judgments across multiple participants improved correspondence only for specialist species. The average correspondence of aggregated judgments increased as group size increased but leveled off after 5 experts for all species. Our results suggest that correspondence between expert models and empirical surveys increases as habitat specialization increases. We encourage inclusion of participants knowledgeable of the study area and model validation for expert-based modeling of understudied and generalist species.     

Genetic structure of natural populations of California red abalone (<Emphasis Type="Italic">Haliotis rufescens</Emphasis>) using multiple genetic markers

Mitochondrial cytochrome oxidase subunit one (COI) sequence, nuclear microsatellites, and amplified fragment length polymorphisms (AFLPs) were used to evaluate connectivity among nine red abalone (Haliotis rufescens) populations sampled between August 1998 and November 2003 along approximately 1,300 km of California coastline from Crescent City (41°46′N, 124°12′W) to San Miguel Island (34°02′N, 120°22′W). COI sequences and microsatellite genotypes did not show significant genetic divergence among nine sampled populations. A subset of five populations spanning the geographic range of the study was scored for 163 polymorphic AFLP markers. Of these, 41 loci showed significant divergence (P < 0.001) among populations. Still, no AFLP markers were diagnostic for any of the study populations, and assignment tests did not consistently assign individuals to the correct population. Although the AFLP data are the first to suggest there is significant genetic differentiation among California red abalone populations, the discordance between the different genetic markers needs further study before unambiguous conclusions can be drawn with respect to connectivity among the populations. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

THE EFFECTS OF CHLORINE,ELEVATED TEMPERATURE AND EXPOSURE DURATION OF POWER PLANT EFFLUENTS ON LARVAL WHITE PERCH Morone americana (Gmelin)1

ABSTRACT: Chlorine-temperature interaction studies with various exposure times were conducted on 25–day old larval white perch, Morone Americana, using total residual chlorine (TRC) concentrations of 0.0, 0.15, and 0.30 mg/1 TRC in combination with ΔTs of 2, 6, and 10 C above a base temperature of 18 C. Larval fish were exposed to the chlorine-temperature test conditions for exposure periods of 0.08, 2.0 and 4.0 hours. After each respective exposure period, chlorine concentrations were decayed naturally over a 1.0 to 1.5 hour period to < 0.01 mg/1 TRC; temperatures were decayed over a 4 hour period to 2.0 C above the base temperature. These test conditions were used to simulate chlorine and temperature conditions encountered in power plant discharge canals and near field receiving streams. The interactions of chlorine, ΔT and exposure duration as factors which caused death up to 36 hours after the exposure periods were established by regression model techniques. An initial interaction model showed that ΔT was not a factor which contributed to death. A predictive model for chlorine and exposure duration was constructed which showed that potential impact to larval white perch from chlorine at power facilities with once through cooling systems can be minimized by 1) using short duration exposures (< 1 hour) to chlorine in plants that chlorinate intermittently or 2) by rapid mixing in the receiving stream in plants that chlorinate on a low level (< 0.05 mg/1) continuous basis. Similar considerations should be given to cooling tower blowdown which contain chlorinated water.