Source apportionment of fine carbonaceous particles by positive matrix factorization at Gosan background site in East Asia

Fine particle (aerodynamic diameter <2.5 microm) samples were collected during six intensive measurement periods from November 2001 to August 2003 at Gosan, Jeju Island, Korea, which is one of the representative background sites in East Asia. Chemical composition of these aerosol samples including major ion components, trace elements, organic and elemental carbon (OC and EC), and particulate polycyclic aromatic hydrocarbons (PAHs) were analyzed to study the impact of long-range transport of anthropogenic aerosol. Aerosol chemical composition data were then analyzed using the positive matrix factorization (PMF) technique in order to identify the possible sources and estimate their contribution to particulate matter mass. Fourteen sources were then resolved including soil dust, fresh sea salt, transformed natural source, ammonium sulfate, ammonium nitrate, secondary organic carbon, diesel vehicle, gasoline vehicle, fuel oil combustion, biomass burning, coal combustion, municipal incineration, metallurgical emission source, and volcanic emission. The PMF analysis results of source contributions showed that the natural sources including soil dust, fresh and aged sea salt, and volcanic emission contributed to about 20% of the measured PM(2.5) mass. Other primary anthropogenic sources such as diesel and gasoline vehicle, coal and fuel oil combustion, biomass burning, municipal incineration, metallurgical source contributed about 34% of PM(2.5) mass. Especially, the secondary aerosol mainly involved with sulfate, nitrate, ammonium, and organic carbon contributed to about 39% of the PM(2.5) mass.     

Experimental study of the characteristics of solid fuel from fry-dried swine excreta

Swine excreta were dried by boiling via immersion in hot oil. In this method, moisture in the excreta is replaced with oil or evaporated by turbulent heat transfer in high-temperature oil. The dried excreta can be used in an incinerator like low-rank coal or solid fuel. Refined waste oil and B–C heavy oil were used for drying. Drying for 8 min at 150 °C reduced the water content of raw excreta from 78.90 wt.% to 1.56 wt.% (refined waste oil) or 1.62 wt.% (B–C heavy oil) and that of digested excreta from 79.58 wt.% to 3.40 wt.% (refined waste oil) or 3.48 wt.% (B–C heavy oil). The low heating values of the raw and digested excreta were 422 kJ/kg and ?2,713 kJ/kg, respectively, before drying and 27,842–28,169 kJ/kg and 14,394–14,905 kJ/kg, respectively, after drying. A heavy metal analysis did not detect Hg, Pb, Cd, As, and Cr in the dried excreta, but Al, Cu, and Zn, which occur in the feed formula, were detected. Thermogravimetric analysis before and after drying revealed that emission of volatiles and combustion of volatiles and fixed carbon occurred at temperatures of 250–500 °C when air was used as the transfer gas.     

Heavy metal immobilization in soil near abandoned mines using eggshell waste and rapeseed residue

Heavy metal contamination of agricultural soils has received great concern due to potential risk to human health. Cadmium and Pb are largely released from abandoned or closed mines in Korea, resulting in soil contamination. The objective of this study was to evaluate the effects of eggshell waste in combination with the conventional nitrogen, phosphorous, and potassium fertilizer (also known as NPK fertilizer) or the rapeseed residue on immobilization of Cd and Pb in the rice paddy soil. Cadmium and Pb extractabilities were tested using two methods of (1) the toxicity characteristics leaching procedure (TCLP) and (2) the 0.1 M HCl extraction. With 5 % eggshell addition, the values of soil pH were increased from 6.33 and 6.51 to 8.15 and 8.04 in combination with NPK fertilizer and rapeseed residue, respectively, compared to no eggshell addition. The increase in soil pH may contribute to heavy metal immobilization by altering heavy metals into more stable in soils. Concentrations of TCLP-extracted Cd and Pb were reduced by up to 67.9 and 93.2 % by addition of 5 % eggshell compared to control. For 0.1 M HCl extraction method, the concentration of 0.1 M HCl-Cd in soils treated with NPK fertilizer and rapeseed residue was significantly reduced by up to 34.01 and 46.1 %, respectively, with 5 % eggshell addition compared to control. A decrease in acid phosphatase activity and an increase in alkaline phosphatase activity at high soil pH were also observed. Combined application of eggshell waste and rapeseed residue can be cost-effective and beneficial way to remediate the soil contaminated with heavy metals.     

Assays of dioxins and dioxin-like compounds in actually contaminated soils using transgenic tobacco plants carrying a recombinant mouse aryl hydrocarbon receptor-mediated β-glucuronidase reporter gene expression system

The transgenic tobacco plant XD4V-26 carrying the recombinant mouse aryl hydrocarbon receptor XD4V-mediated β-glucuronidase (GUS) reporter gene expression system was used for assay of dioxins and dioxin-like compounds consisting of polychlorinated dibenzeno-p-dioxins, polychlorinated dibenzofurans, and coplanar polychlorinated biphenyls (Co-PCBs) in actually contaminated soils. The transgenic tobacco plant XD4V-26 showed a significant dose-dependent induced GUS activity when cultured on MS medium containing PCB126 [toxic equivalency factor (TEF) = 0.1]. In contrast, PCB169 and PCB180, which have 0.03 of TEF and unassigned TEF values, respectively, did not significantly induce GUS activity under the same conditions as with PCB126. When the tobacco plants were cultivated for up to 5 weeks on actually contaminated soils with dioxins and dioxin-like compounds collected from the periphery of an incinerator used for disposal of residential and industrial wastes, GUS activity in the leaves was dose-dependently increased. The plants clearly detected 360 pg-TEQ g^?1 of dioxins and dioxin-like compounds in this assay. There was a positive correlation between GUS activity and TEQ value of dioxins and dioxin-like compounds in the plants. This assay does not require any extraction and purification processes for the actually contaminated soil samples.     

Studies on hexavalent chromium biosorption by chemically-treated biomass of Ecklonia sp

The biomass of the brown seaweed, Ecklonia sp., is capable of reducing Cr(VI) to Cr(III). However, very little is known about the mechanism of Cr(VI) reduction by the biomass. The aims of the present investigation were to enhance the Cr(VI)-reducing capacity of the biomass using various chemical treatments and to elucidate the mechanisms governing Cr(VI) reduction. Among the various chemical treatments, acid-treatment showed the best performance with regards the improvement of Cr(VI) removal from the aqueous phase, while organic solvent-treatment significantly improved the removal efficiency of total Cr in the equilibrium state. Based on FTIR study, the biomass was subjected to chemical modification of its amino and carboxyl groups, to examine their roles in the Cr(VI) removal from the aqueous phase. Methylation of the amino group significantly decreased the Cr(VI) removal rate, but amination of the carboxyl group significantly increased the Cr(VI) removal rate. Meanwhile, esterification of the carboxyl group and carboxylation of the amino group decreased the Cr(VI) removal rate, but the former showed a more negative effect than the latter. These findings indicated that the amino and carboxyl groups take part in the Cr(VI) removal from the aqueous phase. In conclusion, mechanisms for direct and indirect Cr(VI) removal are proposed, and some aspects for the application of this biomass to Cr(VI) detoxification are discussed.     

Phytotoxicity and phytoremediation of 2,6-dinitrotoluene using a model plant, Arabidopsis thaliana

Biochemical and genetic studies of xenobiotic metabolism in the model plant Arabidopsis have significant potential in providing information for phytoremediation. This paper presents the toxicity of 2,6-dinitrotoluene (2,6-DNT) to Arabidopsis under axenic conditions, the fate and transformation of 2,6-DNT after uptake by the plant, and the effect of a putative glutathione S-transferase (GST), which is highly induced by 2,4,6-trinitrotoluene (TNT) in the previous study, on the detoxification of 2,6-DNT. 2,6-DNT had toxic effects on the growth of Arabidopsis based on whole seedling as well as root growth assays. Using [U- 14C]2,6-DNT, the recovery was over 87% and less than 2% accounted for the mineralization of 2,6-DNT in axenic liquid cultures during the 14d of exposure. About half (48.3%) of the intracellular radioactivity was located in the root tissues in non-sterile hydroponic cultures. 2-Amino-6-nitrotoluene (2A6NT) and two unknown metabolites were produced as transformation products of 2,6-DNT in the liquid media. The metabolites were further characterized by proton NMR spectra and the UV-chromatograms when the plant was fed with either 2,6-DNT or 2A6NT. In addition, polar unknown metabolites were detected at short retention times from radiochromatograms of plant tissue extracts. The GST gene of the wild-type of Arabidopsis in response to 2,6-DNT was induced by 4.7-fold. However, the uptake rates and the tolerance at different concentrations of 2,6-DNT and TNT were not significantly different between the wild-type and the gst mutant indicating that induction of the GST gene is not related to the detoxification of 2,6-DNT.     

Airborne rice pollen and pollen allergen in an agricultural field: aerobiological and immunochemical evidence

Grass pollens are well known among the health hazardous bioaerosols causing respiratory allergy. Being an important member of the grass family, the rice plants contribute a huge pollen load in agricultural fields during flowering. This results in a seasonal trigger of hay fever and respiratory allergy in the field workers and people living in the vicinity. Studies on the monitoring of airborne rice pollen and the intensity of the released allergen in agricultural fields are largely lacking. The aims of the present study were: (1) daily and hourly monitoring of airborne rice pollen in an agricultural field during the flowering period of plants in a winter crop season by using the Burkard 7-Day Volumetric Sampler and (2) the measurement of hourly airborne allergen intensity in the field in a peak rice pollen period by the double-antibody and chemiluminescence techniques to find out its relationship with the airborne rice pollen concentration. The monthly average concentration of rice pollen was 95 pollen m(-3) and the range of daily average pollen concentration was 0 to 386 pollen m(-3). A bimodal diurnal periodicity showed that the airborne rice pollen concentrations remained high at two different times of the day: between 08:00 h to 12:00 h and 14:00 h to 16:00 h. Deposition of airborne rice pollen allergen showed darker intensities on the immunostained tapes from the Burkard Sampler at the same two positions corresponding to higher pollen counts. These observations provided direct evidence of the allergenicity of airborne rice pollen in field conditions.     

A simultaneous optimization approach for the design of wastewater and heat exchange networks based on cost estimation

A new systematic methodology for designing wastewater and heat exchange networks for process industries involving effluent streams containing multiple contaminants is proposed. A simultaneous optimization approach mathematically combines the problems of wastewater and heat exchanger network optimization into a single step. This process includes two global iterations of a similar two-stage approach and optimizes networks for water and heat exchange simultaneously based on cost estimation. The objective function is to minimize the total annual cost of the wastewater and heat exchange network design which is subject to the mass and energy balance constraints on all the pertinent flows and to constraints related to the concentrations of contaminants. The proposed method employs a strategy to address a mixed integer non-linear programming (MINLP) formulation. Cost estimates for optimized wastewater and heat exchange networks for an oil refinery process are generated, illustrating the effectiveness of the proposed methodology.     

Evaluation of Hook Handles in a Pulling Task

To evaluate the effect of handle design characteristics on subjective ratings and pulling forces, meat-hook handles with various handle shapes, sizes, and hook positions were tested in a pulling task. Finger and phalange force data measured by force sensitive resistors and subjective ratings of discomfort were also evaluated. Generally subjects preferred 37-mm double frustum, 30-mm oval handles followed by 30-mm double frustum handles, 37-mm oval, and 45-mm double frustum handles. In the analyses of total pulling force, 37- and 45-mm double frustum handles showed less required pulling force than the others. The averages of finger force contributions to the total pulling force were 27.2, 28.1, 23.9, and 20.8% in order from index to little fingers. The average of phalange force contributions were 28.8, 33.6, and 37.6% for the distal, middle, and proximal phalanges, respectively. The findings illustrate that the pulling finger forces and subjective discomfort ratings were related to the handle shape as well as handle size.