A model for positive environmental control

In the control of pollution, two apparently important facts are often negelected: (1) removal of a particular pollutant from a particular source and location may merely result in transforming it into a pollutant, or pollutants of different forms, in other locations; (2) the activity of pollution control itself requires inputs, the production of which may generate additional pollutants. In order to achieve positive environmental control, these two facts must be considered in selecting control processes and in determining optimum control standards. It is necessary that an integrated approach to pollution control be taken, making allowances for ecological inter-relations. As practiced today, pollution control is handled as separate problems of disposing gas, liquid and solid wastes. This paper proposes a model for evaluating the total environmental impact of a pollution control process or method. Theoretical criteria for determining an optimum control level with or without resource constraint are also derived.     

Water and soil pollution by Spent lubricating oils

This paper shows that spent lubricating oils from automobile engines generate carboxylic acids on environmental exposure. Samples of exposed oils, isolated from polluted river water and shore muds obtained from various locations, showed a direct proportionality between carboxylic acid content and time of exposure. Carboxylic acids were isolated by solvent extraction and studied by infrared spectroscopy.     

Mobility control: How injected surfactants and biostimulants may be forced into low‐permeability units

Recovering dense nonaqueous‐phase liquid (DNAPL) remains one of the most difficult problems facing the remediation industry. Still, the most common method of recovering DNAPL is to physically remove the contaminants using common technologies such as total fluids recovery pumps, vacuum systems, and “pump‐and‐treat.” Increased DNAPL removal can be attained using surfactants to mobilize and/or solubilize the pollutants. However, very little is understood of the methods developed by petroleum engineers beginning in the 1960s to overcome by‐passed, low‐permeability zones in heterogeneous oil reservoirs. By injecting or causing the formation of viscous fluids in the subsurface, petroleum engineers caused increased in‐situ pressures that forced fluid flow into low permeability units as well as the higher permeability thief zones. Polymer flooding involves injecting a viscous aqueous polymer solution into the contaminated aquifer. Foam flooding involves injecting surfactant to decontaminate the high‐permeability zones and then periodic pulses of air to cause a temporary viscous foam to form in the high‐permeable zones after all DNAPL is removed. Later surfactant pulses are directed by the foam into unswept low‐permeable units. These methods have been applied to DNAPL removal using surfactants but they can also be applied to the injection of bio‐amendments into low‐permeability zones still requiring continued remediation. Here we discuss the principles of mobility control as practiced in an alluvial aquifer contaminated with chlorinated solvent and coal tar DNAPLs as well as some field results. © 2003 Wiley Periodicals, Inc.     

Implications of Land Use Changes on Carbon Dynamics and Sequestration—Evaluation from Forestry Datasets, India

Forests and soils are a major sink of carbon, and land use changes can affect the magnitude of above ground and below ground carbon stores and the net flux of carbon between the land and the atmosphere. Studies on methods for examining the future consequences of changes in patterns of land use change and carbon flux gains importance, as they provide different options for CO₂ mitigation strategies. In this study, a simulation approach combining Markov chain processes and carbon pools for forests and soils has been implemented to study the carbon flows over a period of time. Markov chains have been computed by converting the land use change and forestry data of India from 1997 to 1999 into a matrix of conditional probabilities reflecting the changes from one class at time t to another class time t+1. Results from Markov modeling suggested Indian forests as a potential sink for 0.94 Gt carbon, with an increase in dense forest area of about 75.93 Mha and decrease of about 3.4 Mha and 5.0 Mha in open and scrub forests, if similar land use changes that occurred during 1997–1999 would continue. The limiting probabilities suggested 34.27 percent as dense forest, 6.90 as open forest, 0.4 percent mangrove forest, 0.1 percent scrub and 58 percent as non-forest area. Although Indian forests are found to be a potential carbon sink, analysis of results from transition probabilities for different years till 2050 suggests that, the forests will continue to be a source of about 20.59 MtC to the atmosphere. The implications of these results in the context of increasing anthropogenic pressure on open and scrub forests and their contribution to carbon source from land use change and forestry sector are discussed. Some of the mitigation aspects to reduce greenhouse gas emissions from land use change and forestry sector in India are also reviewed in the study.     

Developmental Processes, Changing Lifestyle and Traditional Wisdom: Analyses from Western Himalaya

Traditional knowledge and practices are important in prudent resource use and biodiversity conservation. The implications of modernization and changing lifestyle are discussed in the context of agriculture and resource use, the two sectors in which maximum modernization has occurred. The information was gathered through observations and structured interviews over three years (July 1996 to July 1999) of field work in the western Himalaya. It was observed that forest based subsistence agriculture has given way to the market dependant cash crop cultivation. That apart from loss of genetic diversity, has also resulted in the degradation of forests. The use of wild plants in the day-to-day activities has also declined and dependence on high value market products has increased. Currently, wild plants are used only if no other cheap substitute is available in the market or if the use is economically beneficial to the people. Thus, the knowledge gathered through ages of experience is eroding because of the activities geared for short-term economic benefits which, in long run, may not be sustainable.     

The Water Poverty Index: Development and application at the community scale

The article details the development and uses of the water poverty index (WPI). The index was developed as a holistic tool to measure water stress at the household and community levels, designed to aid national decision makers, at community and central government level, as well as donor agencies, to determine priority needs for interventions in the water sector. The index combines into a single number a cluster of data directly and indirectly relevant to water stress. Subcomponents of the index include measures of: access to water; water quantity, quality and variability; water uses (domestic, food, productive purposes); capacity for water management; and environmental aspects.
The WPI methodology was developed through pilot projects in South Africa, Tanzania and Sri Lanka and involved intensive participation and consultation with all stakeholders, including water users, politicians, water sector professionals, aid agency personnel and others. The article discusses approaches for the further implementation of the water poverty index, including the possibilities of acquiring the necessary data through existing national surveys or by establishing interdisciplinary water modules in school curricula. The article argues that the WPI fills the need for a simple, open and transparent tool, one that will appeal to politicians and decision makers, and at the same time can empower poor people to participate in the better targeting of water sector interventions and development budgets in general.     

Strategies for sustainable development of the small-scale gold and diamond mining industry of Ghana

The small-scale gold and diamonds mining industry is of great importance to Ghana. Since its regularization in 1989 the sector has produced and sold over 1.5 million troy ounces of gold and 8.0 million carats of diamonds. During the same period the sector also provided direct employment to over 100,000 people and improved the socioeconomic life of many individuals and communities. However, these were largely achieved at a cost to the environment in areas where mining is carried out and there is the need to develop the industry in a sustainable manner. This paper looks at the developments in the small-scale gold and diamonds mining industry in Ghana and proposes some strategies on how the concepts of sustainable development could be applied to the industry.     

Occurence and Distribution of Polycyclic Aromatic Hydrocarbons in Ankara Precipitation

Urban atmospheric environment contains many trace organic pollutants that are related to the incomplete fuel combustion in domestic heating, industrial plants and automobile traffic. Removal of these pollutants from the atmosphere takes place through wet and dry deposition as well as chemical transformations. In this study, concentrations of polycyclic aromatic hydrocarbons (PAHs) in wet deposition samples were determined at an urban site of Turkey. Wet and dry deposition samples were collected using Andersen Rain Sampler. The sampler was modified accordingly for the collection of organic pollutants. Collected samples were preconcentrated by using solid phase extraction (SPE) disks and consecutively analyzed by Gas Chromatography-Mass Spectrometry (GC-MS). Among the 13 compounds quantified in this study, anthracene, fluoranthene, and pyrene were found more frequently and at elevated concentrations (202, 271 and 260 ng L^-1 mean concentrations, respectively).Concentrations of PAHs were found to be high in winter period.     

Evidence for biodegradation and volatilisation of dissolved petroleum hydrocarbons during in situ air sparging in large laboratory columns

Laboratory column experiments run for up to 13 days compared air sparging of groundwater contaminated by dissolved petroleum hydrocarbons in sterile and non-sterile aquifer sediments as well as uncontaminated sediments and groundwater. Loss of dissolved BTEX compounds in the contaminated columns was very rapid, occurring through volatilisation. The majority of the dissolved total organic carbon (TOC) persisted for much longer periods however. A direct comparison between losses from sterile and non-sterile columns suggested a negligible contribution of biodegradation to the removal of TOC. This was difficult to confirm through examination of O₂ utilisation because oxidation of a small amount of reduced sulphur in the aquifer materials was the dominant sink for O₂. Despite this, it was possible to conclude that less than 22% of the removal of TOC was through biodegradation during the first three days of air sparging.