Characteristics of organic precursors and their relationship with disinfection by-products

The molecular weight distribution and chemical composition of precursors and their relationship with disinfection by-products (DBPs) were investigated. Most of the organic matter responsible for the major DBP precursors in the Pan-Hsin water are small compounds with a molecular weight less than 1 kDa. The hydrophobic acids display the greatest ability to produce DBP. Therefore, effective removal of small molecules or hydrophobic acidic organics prior to disinfection process will significantly reduce the DBP concentration in the finished water. Although the coagulation process is effective in removing large organic precursors and the removal efficiencies of CHCl3 formation potential and organic carbon increase proportionally to the molecular weight of the precursors, the conventional treatment methods have limited efficiency in eliminating small precursors, which have high DBP formation potential.     

Liquid chromatography study of pyrene degradation by two micromycetes in a freshwater sediment.

Pyrene biodegradation in a freshwater sediment without fungi supply, or inoculated with two sediment micromycetes, Mucor racemosus var. sphaerosporus and Phialophora alba was studied after 0, 5, 13, 28, 60 and 90 days. The influence of glucose addition was estimated, and a liquid chromatographic method for simultaneous quantitative determination of residual anthracene, fluoranthene and pyrene in the sediment was developed. Samples with PAHs were extracted in Soxhlet with ethyl acetate, and LC analysis was performed on a 5 microm Supelcosil column (150 x 4.6 mm I.D.) with gradient elution (2 ml min(-1)) of acetonitrile-water and UV detection at 254 nm. Recoveries of anthracene, fluoranthene and pyrene were 90.3%+/-1.1%, 93.2%+/-0.9% and 90.42%+/-1.9%, respectively, without interference. The native sediment microorganisms (with or without glucose added) have shown 35% pyrene degradation and sediment with glucose inoculated by the strains revealed 40%.     

Sediments as a sink for UV filters and benzotriazoles: the case study of Upper Iguaçu watershed,Curitiba (Brazil)

Ingredients in home and personal care products, including UV filters and benzotriazoles, are high production volume chemicals extensively used in our daily life, despite several studies revealed their potential eco-toxicity and endocrine-disrupting capacity. Due to some features, such as high lipophilicity, low degradability, and persistence of many of these compounds, sediments can be considered a sink for them in the aquatic environment. In the present study, nine organic UV filters and three benzotriazoles were investigated for the first time in sediments from four urban rivers in Brazil. The contaminants were analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The results revealed that octocrylene (OC), etylhexyl-methoxycinnamate (EHMC), benzophenone-3 (oxybenzone, BP3), and benzotriazole (BZT) were the predominant compounds adsorbed on the sediments, with concentrations ranging from 5.6 to 322.2 ng g⁻¹ dry weight. The results reported in this work constitute the first data on the accumulation of polar benzotriazoles and lipophilic organic UV filters in sediments from Brazil.

     

Development and evaluation of a continuous coarse (PM10-PM2.5) particle monitor

In this paper, we describe the development and laboratory and field evaluation of a continuous coarse (2.5-10 microm) particle mass (PM) monitor that can provide reliable measurements of the coarse mass (CM) concentrations in time intervals as short as 5-10 min. The operating principle of the monitor is based on enriching CM concentrations by a factor of approximately 25 by means of a 2.5-microm cut point round nozzle virtual impactor while maintaining fine mass (FM)--that is, the mass of PM2.5 at ambient concentrations. The aerosol mixture is subsequently drawn through a standard tapered element oscillating microbalance (TEOM), the response of which is dominated by the contributions of the CM, due to concentration enrichment. Findings from the field study ascertain that a TEOM coupled with a PM10 inlet followed by a 2.5-microm cut point round nozzle virtual impactor can be used successfully for continuous CM concentration measurements. The average concentration-enriched CM concentrations measured by the TEOM were 26-27 times higher than those measured by the time-integrated PM10 samplers [the micro-orifice uniform deposit impactor (MOUDI) and the Partisol] and were highly correlated. CM concentrations measured by the concentration-enriched TEOM were independent of the ambient FM-to-CM concentration ratio, due to the decrease in ambient coarse particle mass median diameter with an increasing FM-to-CM concentration ratio. Finally, our results illustrate one of the main problems associated with the use of real impactors to sample particles at relative humidity (RH) values less than 40%. While PM10 concentrations obtained by means of the MOUDI and Partisol were in excellent agreement, CM concentrations measured by the MOUDI were low by 20%, and FM concentrations were high by a factor of 5, together suggesting particle bounce at low RH.     

Genotoxic damage in free-living Algerian mouse (Mus spretus) after the Coto Doñana ecological disaster

The Do?ana National Park (Spain), one of the most important wildlife sites in the West of Europe, was affected (25 April 1998) by the spill of acidic waste rich in toxic metals (mainly zinc, lead, copper, etc.), arsenic and aromatic amines from the Aznalcollar mine accident. Micronuclei test with May Grunwald-Giemsa and with CREST-antikinetocore staining using DAPI as counter-staining were performed on peripheral blood erythrocytes from Algerian mice to evaluate genotoxic damage. Animals were collected in four locations each differently affected by the disaster. Higher frequencies of micronuclei and CREST-positive micronuclei were observed in the sites, which were reached by toxic sludge and contaminated water in comparison with those located within the park. The results obtained applying the two methods indicate that DAPI staining is more sensitive in detecting micronuclei. Genotoxic biomonitoring should be further carried out in the area to control the mutagenetic level in natural populations.     

Evidence of coprostanol estrogenicity to the freshwater mussel Elliptio complanata

Coprostanol (5 beta (H)-cholestan-3 beta ol) is a reduced metabolite of cholesterol produced by micro-organisms found in the intestinal tract of mammals. This substance abounds in urban effluents and is accumulated by organisms living in the vicinity of municipal effluent outfalls. In an earlier study, freshwater mussels exposed to contaminated river water for 62 days accumulated large quantities of coprostanol (Cop) in their soft tissues (16 micrograms/g dry wt.). Moreover, these mussels were found to have elevated levels of vitellin in their hemolymphs, suggesting estrogenic effects. Although municipal wastewaters are known to contain other estrogenic compounds capable of inducing Vn synthesis in mussels, the estrogenic potential of coprostanol was singled out for examination. To this end, mussels were first injected with concentrations of coprostanol via the abductor muscle route, and allowed to stand in aerated water for 72 h at 15 degrees C. The levels of Vn in mussel hemolymph were assayed using the organic alkali-labile phosphate method. A competitive estradiol-binding assay was then devised to measure the ability of coprostanol to compete in the binding of fluorescein-labeled estradiol-albumin to cytosolic proteins. Coprostanol partially reversed the binding of labeled estradiol-albumin to cytosolic proteins with an EC50 of 1 mM. In addition, injections of coprostanol and estradiol-17 beta led to increased levels of vitellins in the hemolymph of treated mussels. Moreover, incubation of cop in gonad homogenate extracts in the presence of NADPH led to the formation of two compounds, as determined by high-performance thin-layer chromatography. One of these compounds appears to be the C17 oxidation product of coprostanol, whose polarity is similar to that of estradiol. The results present evidence that coprostanol is estrogenic to freshwater mussels.     

Mineralogical compositions of aquifer matrix as necessary initial conditions in reactive contaminant transport models

Mineralogical compositions and their spatial distributions are important initial conditions for reactive transport modeling. However, popular Kd-based "reactive" transport models only require contaminant concentrations in the pore fluids as initial conditions, and minerals implicitly represent infinite sources and sinks in these models. That situation results in a general neglect of mineralogical characterization in site investigations. This study uses a coupled multi-component reactive mass transport model to predict the natural attenuation of a ground water plume at a uranium mill tailings site in western USA. Numerous ground water geochemistry data are available at this site, but mineralogical data are sketchy. Even given the well-defined pore fluid chemistry, variations of secondary mineral species and mineral abundances in the aquifer resulted in significantly different modeling outcomes. Results show that the amount of calcite in the aquifer determines the distances of plume migration. The possible presence of jurbanite, an aluminum sulfate phase, can store acidity temporarily but cause more severe contamination on a later date. The surfaces of iron oxyhydroxides can store significant amounts of sulfate and protons and serve as a second source for prolonged contamination. These simulations under field conditions illustrate that mineralogical compositions are an essential requirement for accurate prediction of contaminant fate and transport.     

On the hydro-dispersive equivalence between multi-layered mineral barriers

In the context of municipal solid waste and hazardous waste disposal, the notion of "equivalence" between different barrier designs appears in regulatory documents from several industrialized countries. While in the past, equivalence has been thought of mainly in terms of contaminant travel times, in recent years it has been defined more in terms of the magnitude of a disposal site's potential impact on groundwater resources. This paper presents some original analytical solutions to the problem of contaminant migration through a multi-layered mineral barrier. The solutions account for the two major mechanisms of subsurface contaminant migration, namely, advection and diffusion-dispersion. An example application using the proposed solutions and a numerical model illustrates how one multi-layered mineral barrier can be considered superior to another from a strictly hydro-dispersive viewpoint. The influence of partial saturation of the mineral barrier is investigated using a numerical solution to the Richards equation for unsaturated flow. It is emphasized that conclusions relative to the superiority of one multi-layered barrier, with respect to another, should not only consider hydro-dispersive aspects, but also other processes such as the mechanical and chemical evolutions of the different barrier components. Although such phenomena are poorly addressed by existing models, failure to take them into account, at least in a qualitative fashion, may lead to unconservative conclusions with respect to barrier equivalence.     

The occurrence of xenoestrogens in the Elbe river and the North Sea

The xenoestrogens Bisphenol A (BPA), p-alkylphenols and p-alkylphenol ethoxylates were determined in water samples of the North Sea, the Elbe river, and its tributaries Schwarze Elster, Mulde, Saale and the Weisse Elster. The sampling sites of the Elbe river reached from Schmilka at the German-Czech border to Cuxhaven at the estuary. Samples of the North Sea were taken in the German Bight. Additionally, freshly deposed sediments of the River Elbe and its tributaries were analyzed. Partitioning coefficients of these compounds for the distribution between suspended particulate matter (SPM) and the aqueous phase were calculated for samples of the River Elbe at sampling site Geesthacht. The analytical procedure consisted of liquid-liquid extractions of the acidified water samples using dichloromethane. Sediments and SPM samples were extracted by Accelerated Solvent Extraction with n-hexane/acetone. Following a clean-up by HPLC, the analytes were derivatized with heptafluorobutyric acid anhydride and quantified using GC-MSD. The concentration ranges of the compounds analyzed in water samples of the Elbe river were as follows (in ng l(-1)): BPA 9-776, alkylphenols 10-221 and alkylphenol ethoxylates 18-302. In sediment samples the concentrations were (in microg kg(-1) dry mass): BPA 66-343, alkylphenols 17-1378 and alkylphenol ethoxylates 30-1797. In samples of the North Sea the concentrations were generally about 1 order of magnitude lower. As shown by the concentration profiles following the River Elbe into the North Sea, the Elbe river must be considered as a major pollution source for the North Sea concerning the compounds analyzed. The SPM/water-partitioning coefficients calculated (mean values) amounted to: BPA 4.50, alkylphenols 5.52-5.58 and alkylphenol ethoxylates 5.60-6.38. A comparison of the results with data from other surface waters showed that concentrations of these xenoestrogens in the River Elbe and its tributaries were relatively low. The evaluation of the data based on the lowest observable effect concentration (LOEC) for alkylphenols (endpoint: vitellogenin synthesis in male trout) indicated that the concentrations were well below the effectivity threshold.     

Economic comparison of emission control systems for glass manufacturing furnaces with heat recovery

Glass manufacturing, like other process industries, is faced with air pollution compliance problems due to ever stricter emission limits. Several waste gas cleaning equipment options are available for air pollution control (APC) in glass plants, the most common arrangements being based on electrostatic precipitator (ESP) or fabric filter (FF) dust collectors and semi-wet or dry processes for acid gas removal. However, several counteracting aspects affect the choice of gas cleaning technologies, which are confirmed by the discrepancies encountered in actual suppliers' bids. In this paper, the main pollution control options are analyzed by carrying out a critical comparison under the cost-effectiveness point of view to select the lowest cost arrangement considering capital investment, operating expenses, and energy-saving revenues from heat recovery processes. The analysis is carried out with reference to a case study involving actual float glass production lines at Pilkington plants in Italy.