Ecological recovery of vegetation on a coke-factory soil: role of plant antioxidant enzymes and possible implications in site restoration

The present paper investigated the short-term colonization by plants of a highly degraded soil in field conditions. The objectives were to identify, through phytosociological analysis, the plant species able to grow on such polluted areas and to characterize pollutant effects at different biological levels through analyses of plant oxidative status, plant growth or community indexes of richness and biodiversity. Our results showed that among the plants present in the uncontaminated surrounding area, only few species were able to colonize the polluted soil. These species were typical of the first years of grassland successions. Ecological indexes proved that the polluted soil vegetation presented a lower degree of species richness and biodiversity than the control area. These discrepancies were partly explained by pollutant phytotoxicity. Indeed, for several species including Erigeron canadensis and Oenothera biennis, we observed toxic effects of the polluted soil on plant height and biomass. Moreover, at the cellular level, changes in antioxidant enzyme activities (SOD, CAT, APX, GPX and GRD) and lipid peroxidation level (MDA) were observed. Such biochemical changes seemed to play an important role on plant sensitivity/tolerance to pollutants and thus to render them more or less competitive for colonization of such disturbed areas.     

Effect of copper on soil functional stability measured by relative soil stability index (RSSI) based on two enzyme activities

Copper can affect essential processes in soils, often for long periods. Enzyme activity is considered a sensitive indicator to evaluate soil health and the potential toxic impact of a soil contaminant. Nevertheless, there is heterogeneity in the responses from enzyme activity assays because of the influence of pH and other physicochemical parameters on both enzyme activity and metal speciation. This leads to complications when comparing soils and limits the validity of the results. To overcome these problems, this paper evaluates resistance and recovery, quantified by using a relative soil stability index (RSSI), of the beta-glucosidase and protease activities towards an additional heat disturbance (17 h at 60 degrees C) in soils where soil organic matter, pH and Cu content were modified in a factorial setup. Chemical analyses (dissolved Cu, pCu(2+), dissolved organic carbon, pH) were performed both before the heat-perturbation and after the enzyme activity monitoring period. Results show that soil pH did not interfere with the RSSI scores of both enzymes. beta-glucosidase RSSI scores were scarcely affected by copper, making it inappropriate for evaluating copper-induced stress to soils. Protease activity shows stimulations of up to 2.5 times the activity of the unperturbed control in uncontaminated samples only. Thus, the protease RSSI score seems a good indicator for soil health relative to copper contamination given that all samples were affected by the presence of copper and high correlations were observed between RSSI scores and the different copper forms.     

Socialist hydropower governances compared: dams and resettlement as experienced by Dai and Thai societies from the Sino-Vietnamese borderlands

Regional Environmental Change - Research on hydropower development has shown that a diversity of social and environmental impacts of dams is distributed unevenly among various state and corporate...     

Phylogenetic diversity and functional characterization of the Manila clam microbiota: a culture-based approach

According to the hologenome theory, the microbiota contributes to the fitness of the holobiont having an important role in its adaptation, survival, development, health, and evolution. Environmental stress also affects the microbiota and its capability to assist the holobiont in coping with stress factors. Here, we analyzed the diversity of cultivable bacteria associated with Manila clam tissues (mantle, gills, hemolymph) in two non-contaminated sites (Portugal and France) and one metal-contaminated site (Portugal). A total of 240 isolates were obtained. Representative isolates (n = 198) of the overall diversity were identified by 16S rDNA sequencing and subjected to functional characterization. Isolates affiliated with Proteobacteria, Actinobacteria, Firmicutes, and Bacteroidetes. Proteobacteria (mostly Pseudoalteromonadaceae and Vibrionaceae) were dominant in non-contaminated sites while Actinobacteria (mostly Microbacteriaceae) dominated in the metal-contaminated site. The main factor affecting the microbiota composition was contamination. No significant differences were observed between clam tissues and geographic regions. Several isolates tested positive for antibacterial activity, biofilm formation, protease, and siderophore production. The results show that the Manila clam harbors a diverse microbiota that may contribute to clam protection and overall fitness, as well as to its adaptation to stressful environments. In addition, the Manila clam microbiota is revealed as a promising source of novel probiotics with potential application in aquaculture.     

Spatial Distribution Patterns,Sources of Heavy Metals,and Relation to Ecological Risk of Surface Sediments of the Cyprus Northern Shelf (Eastern Mediterranean)

In this study, the spatial distribution of metals and the sources of metal pollution were investigated along the Northern Shelf of Cyprus (Mediterranean Sea). The concentrations of heavy metals and organic matter were measured in sediments collected from the Gemi Konagi, Girne, and Gazi Magusa areas. Measured metal values were compared with Mediterranean background concentrations. Cu and Zn concentrations at the Gemi Konagi area and all of the Cr values were higher than Mediterranean backgrounds. The metal levels were evaluated by the enrichment factor (EF), contamination factor (C_f) and degree of contamination (C_d). EF results indicated that heavy metal sources were probably originated from natural processes and mining activities. The C_f values of Hg indicated low contamination. The C_d (degree of contamination) values for all heavy metals also showed a low degree of contamination at the study area. Metal levels were also compared with the numerical Sediment Quality Guidelines (SQG) for an environmental risk assessment. Results showed that sediments were classified as heavily polluted by Cu and moderately polluted by Zn at Gemi Konagi and heavily polluted by Cr and Ni contamination at all sampling areas per the SQG.     

Effect of carbaryl (carbamate insecticide) on acetylcholinesterase activity of two strains of Daphnia magna (Crustacea,Cladocera)

The present study was designed to investigate the effect of carbaryl (carbamate insecticide) on the acetylcholinesterase activity in two strains (same clone A) of the crustacean cladoceran Daphnia magna. Four carbaryl concentrations (0.4, 0.9, 1.8 and 3.7 µg L^?1) were compared against control AChE activity. Our results showed that after 48 h of carbaryl exposure, all treatments induced a significant decrease of AChE activities whatever the two considered strains. However, different responses were registered in terms of lowest observed effect concentrations (LOEC: 0.4 µg L^?1 for strain 1 and 0.9 µg L^?1 for strains 2) revealing differences in sensitivity among the two tested strains of D. magna. These results suggest that after carbaryl exposure, the AChE activity responses can be also used as a biomarker of susceptibility. Moreover, our results show that strain1 is less sensitive than strain 2 in terms of IC50-48 h of AChE activity. Comparing the EC50-48 h of standard ecotoxicity test and IC50-48 h of AChE inhibition, there is the same order of sensitivity with both strains.     

The effects of different CCS technological scenarios on EU low-carbon generation mix

Carbon capture and storage technology (CCS), a technology to reduce the emissions in coal and gas power generation plants, will play an important role in the achievement of the European Union emissions reduction objective. In the European Union, energy policies are articulated around three different elements: measures to promote renewable energy technologies, the emissions certificates system and both energy-saving and energy-efficiency policies. The succession of directives and communications from the EU Commission on renewable technology generation share targets and the implementation of the European Emissions Market exemplify the serious EU commitment to a more environmentally friendly future. CCS technologies—together with RES technologies—are thus key to achieve the European emissions reduction target. Although the CCS commercial availability is not guaranteed—due to a slow technological development—some institutions, such as the Institute for Prospective Technological Studies, assume, for 2030 horizon, a quick development of this technology, growing until a maximum participation of an 18 % over the fossil fuels total generation. An eventual non-availability of these technologies in 2030 could increase the cost of this objective in a 70 %. Therefore, the achievement of pollutant emissions reduction targets depends on a correct design of the European generation technologies mix, which should include CCS technologies. Nevertheless, the uncertainty about the final costs and economic risk of these technologies makes a question about their future role to arise. This paper analyses the effects of different variations in the cost and risk of the CCS technologies (scenarios) over the European power technologies mix. The results confirm the need of the availability of these technologies in 2030, beyond the potential costs and risks of both options. The reason lies in the methodological approach of portfolio theory, which allows an analysis from an efficient portfolio point of view.     

Composting of wastewater treatment sludge with different bulking agents

The main objectives of this study were to investigate the compostability of wastewater treatment sludge (WTS) containing different bulking agents (BAs) and to determine the most efficient BA. Four different compost trials consisting of mixtures of wheat straw (WS), plane leaf (PL), corncob (CC) and sunflower stalk (SS) with WTS were performed in laboratory reactors. In all experiments, a mixture of 60% WTS and 40% BA (wet basis) was used. The temperature, dry matter (DM), organic matter (OM), pH, electrical conductivity (EC) and C/N ratio were monitored during the composting process. Evaluation of the operational parameters showed that the highest organic matter degradation (i.e. 37.6%), loss of dry matter (i.e. 29.6%) and temperature (i.e. 64 °C) were achieved for the WTS-CC mixtures. Results also showed that the WTS-SS mixture was also successful in terms of these operational parameters. Use of bulking agents for the treatment of wastewater treatment sludge in composting process is an important issue with regards to process efficiency, economy and disposal of agricultural waste. Corncob and sunflower stalk that were previously not used for the composting of WTS from food industry were shown to be highly successful BA materials in this study.

Implications: The compostability of wastewater treatment sludge from the food industry with different bulking agents was studied. Wheat straw, plane leaf, corncob, and sunflower stalk were used as bulking agents. The required microbial stabilization and degree of mineralization were achieved with corncobs and sunflower stalks.     

A new device for formaldehyde and total aldehydes real-time monitoring

A new sensitive technique for the quantification of formaldehyde (HCHO) and total aldehydes has been developed in order to monitor these compounds, which are known to be involved in air quality issues and to have health impacts. Our approach is based on a colorimetric method where aldehydes are initially stripped from the air into a scrubbing solution by means of a turning coil sampler tube and then derivatised with 3-methylbenzothiazolinone-2-hydrazone in acid media (pH?=??0.5). Hence, colourless aldehydes are transformed into blue dyes that are detected by UV–visible spectroscopy at 630 nm. Liquid core waveguide LCW Teflon® AF-2400 tube was used as innovative optical cells providing a HCHO detection limit of 4 pptv for 100 cm optical path with a time resolution of 15 min. This instrument showed good correlation with commonly used techniques for aldehydes analysis such as DNPH derivatisation chromatographic techniques with off-line and on-line samplers, and DOAS techniques (with deviation below 6 %) for both indoor and outdoor conditions. This instrument is associated with simplicity and low cost, which is a prerequisite for indoor monitoring.     

A national reconnaissance for selected organic micropollutants in sediments on French territory

To collect a large data set regarding the occurrence of organic substances in sediment, this study presents the examination of 20 micropollutants, as a national survey. The list of target compounds contains two alkylphenols, three polycyclic aromatic hydrocarbons (PAHs) not commonly included in monitoring programmes, six pesticides or metabolites, five pharmaceutical compounds, two hormones, one UV filter and bisphenol A. The selective and sensitive analytical methods, based on quick, easy, cheap, effective, rugged, and safe (QuEChERS) sample preparation followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) or gas chromatography-time-of-flight mass spectrometry (GC-ToF-MS), allow the quantification at limits comprised between 0.5 and 23 ng/g, depending on the compound. The paper summarizes the analytical results from 154 sampling points. Of the 20 target compounds, 9 were determined at least once, and the sediments contained a maximum of 7 substances. The most frequently detected were PAHs (frequency, 77 %; max., 1,400 ng/g). The pharmaceutical compounds, hormones and pesticides were rarely detected in the samples; the most frequently detected was carbamazepine (frequency, 6 %; max., 31 ng/g). In some cases, the levels of PAHs and bisphenol A exceed the predicted no-effect concentration (PNEC) values.