Assessment of long-term leaching from waste incineration air-pollution-control residues

Assessment of long-term leaching from MSWI air-pollution-control (APC) residues is discussed with respect to use in environmental impact assessment, such as life-cycle assessment (LCA). A method was proposed for estimating leaching as a function of the liquid-to-solid (L/S) ratio in a long-term perspective (L/S 5000l/kg). Data for changes in residue pH as a function of L/S was used in combination with pH dependent leaching data to predict leachate concentrations of Al, Ca, Cd, Ba, Mg, Ni, Pb, S, Pb, V and Zn as a function of L/S. Mass balance calculations were used to determine the element fractions leached with respect to L/S. The estimated long-term leaching from a semi-dry residue and a fly ash was compared with short-term leaching determined by batch tests at L/S 10l/kg, both carbonated and non-carbonated versions of the residues were investigated. Generally, very high L/S ratios above 2000l/kg were required to leach 20-30% of the solid contents. However, Ca and S were depleted at L/S 200-900l/kg. The long-term leachate concentrations were found to either remain at the same level as the initial leaching determined by the L/S 10 batch test, or to significantly decrease compared with the initial leaching. Only Al and Zn were found to show higher leachate concentrations at L/S ratios above 3000-5000l/kg. Carbonation generally prolonged the time needed for depletion from the solid residues; however, Ca and S were depleted faster than in the case of non-carbonated residues. This study shows that uncritical use of batch leaching data for assessing the potential leaching is highly problematic, and evaluations of residue disposal should include scenario specific quantification of the long-term leaching.     

Mechanical-biological waste treatment and the associated occupational hygiene in Finland

A special feature of waste management in Finland has been the emphasis on the source separation of kitchen biowaste (catering waste); more than two-thirds of the Finnish population participates in this separation. Source-separated biowaste is usually treated by composting. The biowaste of about 5% of the population is handled by mechanical-biological treatment. A waste treatment plant at Mustasaari is the only plant in Finland using digestion for kitchen biowaste. For the protection of their employees, the plant owners commissioned a study on environmental factors and occupational hygiene in the plant area. During 1998-2000 the concentrations of dust, microbes and endotoxins and noise levels were investigated to identify possible problems at the plant. Three different work areas were investigated: the pre-processing and crushing hall, the bioreactor hall and the drying hall. Employees were asked about work-related health problems. Some problems with occupational hygiene were identified: concentrations of microbes and endotoxins may increase to levels harmful to health during waste crushing and in the bioreactor hall. Because employees complained of symptoms such as dry cough and rash or itching appearing once or twice a month, it is advisable to use respirator masks (class P3) during dusty working phases. The noise level in the drying hall exceeded the Finnish threshold value of 85 dBA. Qualitatively harmful factors for the health of employees are similar in all closed waste treatment plants in Finland. Quantitatively, however, the situation at the Mustasaari treatment plant is better than at some Finnish dry waste treatment plants. Therefore is reasonable to conclude that mechanical sorting, which produces a dry waste fraction for combustion and a biowaste fraction for anaerobic treatment, is in terms of occupational hygiene better for employees than combined aerobic treatment and dry waste treatment.     

Persistence of fermentative process to phenolic toxicity in groundwater

The fermentation process is an important component in the biodegradation of organic compounds in natural and contaminated systems. Comparing with terminal electron-accepting processes (TEAPs), however, research on fermentation processes has to some extent been ignored in the past decades, particularly on the persistence of fermentation process in the presence of toxic organic pollutants. Both field and laboratory studies, presented here, showed that microbial processes in a groundwater-based system exhibited a differential inhibitory response to toxicity of phenolic compounds from coal tar distillation, thus resulting in the accumulation of volatile fatty acids (VFAs) and hydrogen. This indicated that fermentation processes could be more resistant to phenol toxicity than the subsequent TEAPs such as methanogenesis and sulfate reduction, thus providing us with more options for enhancing bioremediation processes.     

Use of beryllium-7 to document soil redistribution following forest harvest operations

Rapid and reliable methods for documenting soil erosion associated with forest harvest operations are needed to support the development of best management practices for soil and water conservation. To address this need, the potential for using 7Be measurements to estimate patterns and amounts of soil redistribution associated with individual post-harvest events was explored. The 7Be technique, which was originally developed for use on agricultural land, was employed to estimate soil redistribution associated with a period of heavy rainfall within a harvested forest area located in the Lake Region of Chile (39 degrees 44'7' S, 73 degrees 10'39' W; 22% slope; and mean annual rainfall 2300 mm yr(-1)). The results provided by the 7Be technique were validated against direct measurements of soil gain or loss during the same period obtained using erosion pins. The information produced by the two approaches was similar. The results of this study demonstrate the potential for using 7Be measurements to document event-based erosion in recently harvested forest areas.     

Effects of elevated atmospheric carbon dioxide on biomass and carbon accumulation in a model regenerating longleaf pine community

Plant species vary in response to atmospheric CO2 concentration due to differences in physiology, morphology, phenology, and symbiotic relationships. These differences make it very difficult to predict how plant communities will respond to elevated CO2. Such information is critical to furthering our understanding of community and ecosystem responses to global climate change. To determine how a simple plant community might respond to elevated CO2, a model regenerating longleaf pine community composed of five species was exposed to two CO2 regimes (ambient, 365 micromol mol(-1) and elevated, 720 micromol mol(-1)) for 3 yr. Total above- and belowground biomass was 70 and 49% greater, respectively, in CO2-enriched plots. Carbon (C) content followed a response pattern similar to biomass, resulting in a significant increase of 13.8 Mg C ha(-1) under elevated CO2. Responses of individual species, however, varied. Longleaf pine (Pinus palustris Mill.) was primarily responsible for the positive response to CO2 enrichment. Wiregrass (Aristida stricta Michx.), rattlebox (Crotalaria rotundifolia Walt. Ex Gmel.), and butterfly weed (Asclepias tuberosa L.) exhibited negative above- and belowground biomass responses to elevated CO2, while sand post oak (Quercus margaretta Ashe) did not differ significantly between CO2 treatments. As with pine, C content followed patterns similar to biomass. Elevated CO2 resulted in alterations in community structure. Longleaf pine comprised 88% of total biomass in CO2-enriched plots, but only 76% in ambient plots. In contrast, wiregrass, rattlebox, and butterfly weed comprised 19% in ambient CO2 plots, but only 8% under high CO2. Therefore, while longleaf pine may perform well in a high CO2 world, other members of this community may not compete as well, which could alter community function. Effects of elevated CO2 on plant communities are complex, dynamic, and difficult to predict, clearly demonstrating the need for more research in this important area of global change science.     

Environmental and production consequences of using alum-amended poultry litter as a nutrient source for corn

Field trials were established to compare alum-treated poultry litter (ATPL), normal poultry litter (NPL), and triple superphosphate (TSP) as fertilizer sources for corn (Zea mays L.) when applied at rates based on current litter management strategies in Virginia. Trials were established in the Costal Plain and Piedmont physiographic regions near Painter and Orange, VA, respectively. Nitrogen-based applications of ATPL or NPL applied at rates estimated to supply 173 kg of plant-available nitrogen (PAN) ha(-1) resulted in significantly lower grain yields than treatments receiving commercial fertilizer at the same rate in 2000 and 2001 at Painter. These decreases in grain yield at the N-based application rates were attributed to inadequate N availability, resulting from overestimates of PAN as demonstrated by tissue N concentrations. However, at Orange no treatment effects on grain yield were observed. Applications of ATPL did not affect Al concentrations in corn ear-leaves at either location. Exchangeable soil Al concentrations were most elevated in treatments receiving only NH4NO3 as an N source. At N-based application rates, the ATPL resulted in lower Mehlich 1-extractable P (M1-P) and water-extractable soil phosphorus (H2O-P) concentrations compared to the application of NPL. A portion of this reduction could be attributed to lower rates of P applied in the N-based ATPL treatments. Runoff collected from treatments which received ATPL 2 d before conducting rainfall simulations contained 61 to 71% less dissolved reactive phosphorus (DRP) than treatments receiving NPL. These results show that ATPL may be used as a nutrient source for corn production without significant management alterations. Alum-treated poultry litter can also reduce the environmental impact of litter applications, primarily through minimizing the P status of soils receiving long-term applications of litter and reductions in runoff DRP losses shortly after application.     

Performance characteristics of sequential separation and quantification of lead-210 and polonium-210 by ion exchange chromatography and nuclear spectrometric measurements

A selective separation and quantitative determination procedure for 210Pb and 210Po in various environmental matrices from different sources such as IAEA-326 soil, phosphate rocks (PR), and phosphogypsum (PG) was developed. The tested samples were digested sequentially using concentrated mineral acids (HF, HNO3) by a programmable high-pressure microwave digestion system. The sample solution was loaded onto a preconditioned ion exchange column (Sr-resin) for chromatographic separation. Polonium-210 was eluted by 6 M HNO3 then spontaneously deposited onto polished silver discs to be measured using low-background alpha spectrometry. Lead-210 was sequentially eluted using 6 M HCl solution, precipitated as lead oxalate, dissolved in HNO3 solution, and mixed with scintillation cocktail to be measured by liquid scintillation counting (LSC). Performance of the developed procedure was tested using a reference soil (IAEA-326), with recommended isotope values, that was used as a quality control to assess separation and quantification efficiency (recovery %). The minimum detectable activities of 210Pb and 210Po were found to be 24 and 0.28 Bq kg(-1) for the measurements using LSC and alpha spectrometry, respectively. The recoveries (%) of 210Pb and 210Po were found to be 80 and 60%, respectively. To test the validity of the proposed LSC method, a comparative study was performed by measuring 210Pb activity concentration in test samples by nondestructive gamma-ray spectrometry.     

Soil organic carbon sequestration in cotton production systems of the southeastern United States: a review

Past agricultural management practices have contributed to the loss of soil organic carbon (SOC) and emission of greenhouse gases (e.g., carbon dioxide and nitrous oxide). Fortunately, however, conservation-oriented agricultural management systems can be, and have been, developed to sequester SOC, improve soil quality, and increase crop productivity. Our objectives were to (i) review literature related to SOC sequestration in cotton (Gossypium hirsutum L.) production systems, (ii) recommend best management practices to sequester SOC, and (iii) outline the current political scenario and future probabilities for cotton producers to benefit from SOC sequestration. From a review of 20 studies in the region, SOC increased with no tillage compared with conventional tillage by 0.48 +/- 0.56 Mg C ha(-1) yr(-1) (H(0): no change, p < 0.001). More diverse rotations of cotton with high-residue-producing crops such as corn (Zea mays L.) and small grains would sequester greater quantities of SOC than continuous cotton. No-tillage cropping with a cover crop sequestered 0.67 +/- 0.63 Mg C ha(-1) yr(-1), while that of no-tillage cropping without a cover crop sequestered 0.34 +/- 47 Mg C ha(-1) yr(-1) (mean comparison, p = 0.04). Current government incentive programs recommend agricultural practices that would contribute to SOC sequestration. Participation in the Conservation Security Program could lead to government payments of up to Dollars 20 ha(-1). Current open-market trading of C credits would appear to yield less than Dollars 3 ha(-1), although prices would greatly increase should a government policy to limit greenhouse gas emissions be mandated.     

Environmental assessment of mercury dispersion, transformation and bioavailability in the Lake Victoria Goldfields, Tanzania

Environmental dispersion and transformation of mercury discharged from gold mining operations has been investigated in field and laboratory studies in order to provide better understanding of the degree of mercury (Hg) pollution and bioavailability in the Lake Victoria goldfields (LVGF) ecosystems. This paper reviews results already published elsewhere and presents additional data on Hg dynamics in the LVGF. Studies conducted at the Mugusu and Rwamagaza artisanal mines indicated different degrees of Hg contamination and dispersion in environmental matrices. Mercury concentration in contaminated river sediments near the Mugusu mine varied from 6.0 to 0.5 mg/kg on a dry weight basis. The highest Hg contamination levels (165-232 mg/kg) were associated with mine tailings at the Rwamagaza mine. Mercury concentrations in fish representing different dietary habits on the southwestern shore of Lake Victoria at the Nungwe Bay were very low (2-35 microg/kg) and thought to represent background levels. These and other results suggested that the use of Hg in gold extraction in the LVGF has not caused high Hg levels in lake fish. The study of Hg in lichens showed Parmelia lichen to be an effective bioindicator for atmospheric Hg contamination due to Hg emissions from gold-amalgam firing and purification operations. The Hg levels in the lichens around the Mugusu mine ranged from 3.1 to 0.1 microg/g; the highest levels were recorded in the lichens sampled close to gold-amalgam processing sites. The regional background level in the Parmelia lichen was 0.05-0.10 microg/g, with a mean level of 0.07 microg/g. Studies of Hg transformation in the mine tailings revealed unexpectedly high methylmercury (MeHg) levels in the tailings (629-710 ng/g), which indicated that oxidation and methylation of metallic Hg in the tailings occurred at significant levels under tropical conditions. Re-equilibration of the tailings with freshwater (FW) indicated the MeHg was firmly bound in the tailings and therefore very little MeHg was released to the water column (0.2-1.5 ng/L). The methylation of Hg in tropical loamy clay soil contaminated with HgCl(2) (5 mg Hg/kg) yielded MeHg concentrations of 11 and 14 ng/g when inundated with seawater and FW, respectively, for 4 weeks. Little MeHg was transferred from the soil to the equilibrated water (< or = 0.4 ng/L). Atmospheric exposure of the soil pre-inundated with FW resulted in net degradation of MeHg during the 1st week of exposure, followed by net production and accumulation of MeHg in the soil (up to 15.5 ng/g) during atmospheric desiccation. Mercury uptake by fish from the Hg(0)-contaminated aquatic sediment-tailings system in the aquarium experiment was found to be low, suggesting the low availability of MeHg for bioaccumulation in the system. These and other results provide useful insights into Hg transformation, mobility and bioavailability in tropical aquatic systems affected by Hg pollution from gold mining operations.     

Integrated Risk Framework for Onsite Wastewater Treatment Systems

Onsite wastewater treatment systems (OWTS) are becoming increasingly important for the treatment and dispersal of effluent in new urbanised developments that are not serviced by centralised wastewater collection and treatment systems. However, the current standards and guidelines adopted by many local authorities for assessing suitable site and soil conditions for OWTS are increasingly coming under scrutiny due to the public health and environmental impacts caused by poorly performing systems, in particular septic tank-soil adsorption systems. In order to achieve sustainable onsite wastewater treatment with minimal impacts on the environment and public health, more appropriate means of assessment are required. This paper highlights an integrated risk based approach for assessing the inherent hazards associated with OWTS in order to manage and mitigate the environmental and public health risks inherent with onsite wastewater treatment. In developing a sound and cohesive integrated risk framework for OWTS, several key issues must be recognised. These include the inclusion of relevant stakeholders throughout framework development, the integration of scientific knowledge, data and analysis with risk assessment and management ideals, and identification of the appropriate performance goals for successful management and mitigation of associated risks. These issues were addressed in the development of the risk framework to provide a generic approach to assessing risk from OWTS. The utilisation of the developed risk framework for achieving more appropriate assessment and management techniques for OWTS is presented in a case study for the Gold Coast region, Queensland State, Australia.