Effect of Rainfall Regime and Slope on Runoff in a Gullied Loess Region on the Loess Plateau in China

Runoff was measured from seven plots with different slopes nested in Tuanshangou catchment on the Loess Plateau to study effect of slopes on runoff in relation to rainfall regimes. Based on nine years of field observation and K-mean clusters, 84 rainfall events were grouped into three rainfall regimes. Rainfall regime A is the group of events with strong rainfall intensity, high frequency, and short duration. Rainfall regime C consists of events with low intensity, long duration, and infrequent occurrence. Rainfall regime B is the aggregation of events of medium intensity and medium duration, and less frequent occurrence. The following results were found: (1) Different from traditional studies, runoff coefficient neither decreased nor increased, but presented peak value on the slope surfaces; (2) For individual plot, runoff coefficients induced by rainfall regime A were the highest, and those induced by rainfall regime C were the lowest; Downslope, the runoff coefficients induced by three rainfall regimes presented the same changing trend, although the peak value induced by regime A occurred on a shorter slope length compared to those by regime B and C; (3) Scale effect on runoff induced by rainfall regime A was the least, and that induced by rainfall regime C was the largest. These results can be explained by the interactions of crusting, soil moisture content, slope length and gradient, and erosion units, etc., in the context of different rainfall regimes.     

Life cycle assessment of disposal of residues from municipal solid waste incineration: recycling of bottom ash in road construction or landfilling in Denmark evaluated in the ROAD-RES model

Two disposal methods for MSWI bottom ash were assessed in a new life cycle assessment (LCA) model for road construction and disposal of residues. The two scenarios evaluated in the model were: (i) landfilling of bottom ash in a coastal landfill in Denmark and (ii) recycling of bottom ash as subbase layer in an asphalted secondary road. The LCA included resource and energy consumption, and emissions associated with upgrading of bottom ash, transport, landfilling processes, incorporation of bottom ash in road, substitution of natural gravel as road construction material and leaching of heavy metals and salts from bottom ash in road as well as in landfill. Environmental impacts associated with emissions to air, fresh surface water, marine surface water, groundwater and soil were aggregated into 12 environmental impact categories: Global Warming, Photochemical Ozone Formation, Nutrient Enrichment, Acidification, Stratospheric Ozone Depletion, Human Toxicity via air/water/soil, Ecotoxicity in water/soil, and a new impact category, Stored Ecotoxicity to water/soil that accounts for the presence of heavy metals and very persistent organic compounds that in the long-term might leach. Leaching of heavy metals and salts from bottom ash was estimated from a series of laboratory leaching tests. For both scenarios, Ecotoxicity(water) was, when evaluated for the first 100 yr, the most important among the twelve impact categories involved in the assessment. Human Toxicity(soil) was also important, especially for the Road scenario. When the long-term leaching of heavy metals from bottom ash was evaluated, based on the total content of heavy metals in bottom ash, all impact categories became negligible compared to the potential Stored Ecotoxicity, which was two orders of magnitudes greater than Ecotoxicity(water). Copper was the constituent that gave the strongest contributions to the ecotoxicities. The most important resources consumed were clay as liner in landfill and the groundwater resource which was potentially spoiled due to leaching of salts from bottom ash in road. The difference in environmental impacts between landfilling and utilization of bottom ash in road was marginal when these alternatives were assessed in a life cycle perspective.     

Recycled vertical flow constructed wetland (RVFCW)--a novel method of recycling greywater for irrigation in small communities and households

The use of greywater for irrigation is becoming increasingly common. However, raw greywater is often contaminated and can cause environmental harm and pose health risks. Nevertheless, it is often used without any significant pretreatment, a practice mistakenly considered safe. The aim of this study was to develop an economically sound, low-tech and easily maintainable treatment system that would allow safe and sustainable use of greywater for landscape irrigation in small communities and households. The system is based on a combination of vertical flow constructed wetland with water recycling and trickling filter, and is termed recycled vertical flow constructed wetland (RVFCW). The RVFCW's properties, removal efficiency, hydraulic parameters and feasibility were studied, as well as the environmental effects of the treated greywater, as reflected by soil and plant parameters over time. The RVFCW was efficient at removing virtually all of the suspended solids and biological oxygen demand, and about 80% of the chemical oxygen demand after 8h. Fecal coliforms dropped by three to four orders of magnitude from their initial concentration after 8h, but this was not always enough to meet current regulations for unlimited irrigation. The treated greywater had no significant negative impact on plants or soil during the study period. The feasibility analysis indicated a return over investment after approximately three years. We concluded that the RVFCW is a sustainable and promising treatment system for greywater use that can be run and maintained by unskilled operators.     

Occurrence of organic contaminants in sewage sludges from eleven wastewater treatment plants, China

This study presents the occurrence of 43 semi-volatile organic compounds (SVOCs) listed as priority pollutants by both China and the United States Environmental Protection Agency, in sewage sludges collected from eleven wastewater treatment plants (WWTPs) of mainland and Hong Kong, China. Thirty-six SVOCs were detected by gas chromatography coupled with mass spectrometer (GC-MS) and at least 14 in each sample. The most abundant compounds were phthalic acid esters (PAEs) and polycyclic aromatic hydrocarbons (PAHs) with total concentrations ranging from 10 to 114mgkg(-1) dry weight (d.w.) (with a mean of 30mgkg(-1) d.w.) and from 1.4 to 33mgkg(-1)d.w. (with a mean of 16mgkg(-1) d.w.), respectively, followed by chlorobenzenes, nitroaromatics, haloethers and halogenated hydrocarbons which occurred generally at concentrations lower than 10mgkg(-1) d.w. Large variations were observed between the concentrations of individual compounds as well as their total concentrations in sludge samples from different WWTPs. The highest values of sum concentration of 16 PAHs and of 6 PAEs were found in sewage sludge from Beijing. The mean total concentration of each class of SVOCs in sewage sludge from mainland was remarkably higher than that from Hong Kong. The concentrations of di(2-ethylhexyl) phthalate in 91% sludge samples met the limit (100mgkg(-1)d.w.) proposed by the Europe Union for land application, whereas the PAH concentrations of 64% sludge samples exceeded the maximum permissible concentration (6.0mgkg(-1)d.w.). The occurrence of SVOCs in this study are compared with other studies and their sources are discussed.     

Channel flow and trichloroethylene treatment in a partly iron-filled fracture: experimental and model results

Technical developments have now made it possible to emplace granular zero-valent iron (Fe(0)) in fractured media to create a Fe(0) fracture reactive barrier (Fe(0) FRB) for the treatment of contaminated groundwater. To evaluate this concept, we conducted a laboratory experiment in which trichloroethylene (TCE) contaminated water was flushed through a single uniform fracture created between two sandstone blocks. This fracture was partly filled with what was intended to be a uniform thickness of iron. Partial treatment of TCE by iron demonstrated that the concept of a Fe(0) FRB is practical, but was less than anticipated for an iron layer of uniform thickness. When the experiment was disassembled, evidence of discrete channelised flow was noted and attributed to imperfect placement of the iron. To evaluate the effect of the channel flow, an explicit Channel Model was developed that simplifies this complex flow regime into a conceptualised set of uniform and parallel channels. The mathematical representation of this conceptualisation directly accounts for (i) flow channels and immobile fluid arising from the non-uniform iron placement, (ii) mass transfer from the open fracture to iron and immobile fluid regions, and (iii) degradation in the iron regions. A favourable comparison between laboratory data and the results from the developed mathematical model suggests that the model is capable of representing TCE degradation in fractures with non-uniform iron placement. In order to apply this Channel Model concept to a Fe(0) FRB system, a simplified, or implicit, Lumped Channel Model was developed where the physical and chemical processes in the iron layer and immobile fluid regions are captured by a first-order lumped rate parameter. The performance of this Lumped Channel Model was compared to laboratory data, and benchmarked against the Channel Model. The advantages of the Lumped Channel Model are that the degradation of TCE in the system is represented by a first-order parameter that can be used directly in readily available numerical simulators.     

Epiphytic lichens as biomonitors of atmospheric pollution in Slovenian forests

Two country-wide surveys using epiphytic lichens as biomonitors of atmospheric pollution carried out during 2000 and 2001 in Slovenia were compared with surveys in 1991 and 1992. In the first survey, epiphytic lichen cover was studied in more than 500 plots of the 4 x 4 km national grid carried out within the framework of forest decline inventories. In the second survey, the epiphytic lichen Hypogymnia physodes (L.) Nyl., was collected on a 16 x 16 km bioindication grid and analysed for S, N, As, Br, Ce, Cd, Cr, K, La, Mo, Rb, Sb, Th, U and Zn contents. Only 'forested area' sampling points were included in the present study. Lichen cover was low, with about 70% of plots with less than 10% foliose lichen cover. No relationship was found between Hypogymnia trace element, N and S concentrations and foliose epiphytic lichen cover.     

长江流域养殖池塘氮磷污染负荷估算

长江流域平原区水网密布、渔业发达,养殖池塘造成的氮磷污染问题突出,是河湖富营养化的重要污染源之一;从大空间尺度,精细化估算养殖池塘的氮磷污染负荷,对水污染的精准防控具有重要意义.以长江流域为研究区,依托Google Earth Engine遥感大数据平台,构建了基于机器学习算法的养殖池塘识别模型,精细化识别了长江流域养殖池塘的分布与类型;梳理养殖坑塘的氮磷污染研究案例,针对长江流域养殖坑塘的特征,构建氮磷污染负荷的估算方法,评估氮磷污染负荷的时空分布.研究结果表明：2021年,长江流域养殖池塘总面积为14567km²,包括鱼塘5820 km²、虾蟹塘8747 km²、氮磷排放量分别为95059、16224 t;中部地区的氮磷污染负荷最大,东部地区次之,西部地区最小.本研究是遥感大数据在大尺度污染负荷定量分析的尝试应用,方法适用于其它类型污染负荷的估算.     

基于GIS的台风灾害损失评估模型研究

由于台风灾害所造成的损失有些是无法用精确的数学模型来描述,其损失可能是一个区间值。为准确及时地了解台风灾害过程中可能造成灾害损失等级的大小,选择了降水量、降水强度、最大风速、经济易损性作为评价的指标。采用可拓分析方法,将评价指标及其特征值作为物元,通过计算综合关联度判断灾害损失的等级;建立基于GIS的台风灾害损失评估模型,以实现台风灾害的动态评估。