Dental microwear patterns of extant and extinct Muridae (Rodentia, Mammalia): ecological implications

Extant species of Muridae occupy a wide array of habitats and have diverse dietary habits. Consequently, their dental microwear patterns represent a potential clue to better understand the paleoecology of their extinct relatives, which are abundant in many Old World Neogene localities. In this study, dental microwear is investigated for specimens of 17 extant species of murine and deomyine rodents in order to test the reliability of this method and infer dietary preferences on the fossil species Saïdomys afarensis. This extinct form comes from a mid-Pliocene site (AL 327) located at the Hadar Formation (Ethiopia) known to have delivered many hominid specimens of Australopithecus afarensis. A significant correlation between microwear patterns and diet is detected. Thus, grass, fruit, and insect eaters display, respectively, high amounts of fine scratches, wide scratches, and large pits. Moreover, some aspects of the paleoecology of S. afarensis, including feeding habits, could be assessed in regard to its dental microwear pattern. Indeed, it probably had feeding habits similar to that of living grass eaters. These results concur with the presence of open to woodland areas covered by an herbaceous vegetal layer, including monocotyledons, in the vicinity of this mid-Pliocene locality.     

Ecological restoration as a strategy for mitigating and adapting to climate change: lessons and challenges from Brazil

Climate change is a global phenomenon that affects biophysical systems and human well-being. The Paris Agreement of the United Nations Framework Convention on Climate Change entered into force in 2016 with the objective of strengthening the global response to climate change by keeping global temperature rise this century well below 2 °C above pre-industrial levels and to pursue efforts to limit the temperature increase even further to 1.5 °C. The agreement requires all Parties to submit their “nationally determined contributions” (NDCs) and to strengthen these efforts in the years ahead. Reducing carbon emissions from deforestation and forest degradation is an important strategy for mitigating climate change, particularly in developing countries with large forests. Extensive tropical forest loss and degradation have increased awareness at the international level of the need to undertake large-scale ecological restoration, highlighting the need to identify cases in which restoration strategies can contribute to mitigation and adaptation. Here we consider Brazil as a case study to evaluate the benefits and challenges of implementing large-scale restoration programs in developing countries. The Brazilian NDC included the target of restoring and reforesting 12 million hectares of forests for multiple uses by 2030. Restoration of native vegetation is one of the foundations of sustainable rural development in Brazil and should consider multiple purposes, from biodiversity and ecosystem services conservation to social and economic development. However, ecological restoration still presents substantial challenges for tropical and mega-diverse countries, including the need to develop plans that are technically and financially feasible, as well as public policies and monitoring instruments that can assess effectiveness. The planning, execution, and monitoring of restoration efforts strongly depend on the context and the diagnosis of the area with respect to reference ecosystems (e.g., forests, savannas, grasslands, wetlands). In addition, poor integration of climate change policies at the national and subnational levels and with other sectorial policies constrains the large-scale implementation of restoration programs. The case of Brazil shows that slowing deforestation is possible; however, this analysis highlights the need for increased national commitment and international support for actions that require large-scale transformations of the forest sector regarding ecosystem restoration efforts. Scaling up the ambitions and actions of the Paris Agreement implies the need for a global framework that recognizes landscape restoration as a cost-effective nature-based solution and that supports countries in addressing their remaining needs, challenges, and barriers.

     

Additional steps in mechanical recyling of PET

This study presents the laboratory scale results of an extra step in Poly (ethylene terephthalate) – PET mechanical recycling (grinding, washing, drying and reprocessing): a chemical washing after the conventional one. Cooking oil PET bottle flakes were washed in water and then subjected to a reaction with an aqueous solution of sodium hydroxide 5 M at 90 °C for 10 min (chemical washing). After rinsing and drying, the flakes were characterized by thermogravimetry, gas chromatography and elemental analysis tests. The results indicated that the chemically washed material had higher purity than PET washed only with water: 99.3% and 96.7%, respectively, which undoubtedly implies properties, applications and prices closer to those of virgin resin. The production of purified terephthalic acid (TPA) from the chemical washing residue was optimized and reached a purity of 99.6%. Despite the results, the use of chemically washed PET and of TPA obtained is not recommended for direct contact with food, since they still contain some impurities.     

Biological impacts of ocean acidification: a postgraduate perspective on research priorities

Research into the effects of ocean acidification (OA) on marine organisms has greatly increased during the past decade, as realization of the potential dramatic impacts has grown. Studies have revealed the multifarious responses of organisms to OA conditions, indicating a high level of intra- and interspecific variation in species’ ability to accommodate these alterations. If we are to provide policy makers with sound, scientific input regarding the expected consequences of OA, we need a broader understanding of these predicted changes. As a group of 20 multi-disciplinary postgraduate students from around the globe, with a study focus on OA, we are a strong representation of ‘next generation’ scientists in this field. In this unique cumulative paper, we review knowledge gaps in terms of assessing the biological impacts of OA, outlining directions for future research.     

Butyltin levels in several Portuguese coastal areas

This work aimed to report present levels (2007–2008 sampling) of tri- (TBT), di- (DBT), and monobutyltin (MBT) in surface sediments from 11 Portuguese coastal sites and discuss the evolution of BTs contamination in the last two decades. All the samples revealed quantifiable values of TBT, DBT, and MBT with total butyltin concentrations between 1 and 565 ng/g (of Sn in dry sediment). Maximum level of TBT, 66 ng/g, was observed in Sado estuary, at Lisnave site, in the proximity of a big shipyard. MBT decreased site by site by the same order as DBT and TBT did, but its concentrations were much higher in many cases, denoting that TBT contamination was much higher in the past. A comparison with the available previous data confirmed a marked decrease of TBT contamination all over the last years, indicating that the main sources of TBT in Portuguese coastwise stopped effectively.     

Applications of life cycle assessment and cost analysis in health care waste management

The establishment of rules to manage Health Care Waste (HCW) is a challenge for the public sector. Regulatory agencies must ensure the safety of waste management alternatives for two very different profiles of generators: (1) hospitals, which concentrate the production of HCW and (2) small establishments, such as clinics, pharmacies and other sources, that generate dispersed quantities of HCW and are scattered throughout the city. To assist in developing sector regulations for the small generators, we evaluated three management scenarios using decision-making tools. They consisted of a disinfection technique (microwave, autoclave and lime) followed by landfilling, where transportation was also included. The microwave, autoclave and lime techniques were tested at the laboratory to establish the operating parameters to ensure their efficiency in disinfection. Using a life cycle assessment (LCA) and cost analysis, the decision-making tools aimed to determine the technique with the best environmental performance. This consisted of evaluating the eco-efficiency of each scenario. Based on the life cycle assessment, microwaving had the lowest environmental impact (12.64 Pt) followed by autoclaving (48.46 Pt). The cost analyses indicated values of US$ 0.12 kg^?1 for the waste treated with microwaves, US$ 1.10 kg^?1 for the waste treated by the autoclave and US$ 1.53 kg^?1 for the waste treated with lime. The microwave disinfection presented the best eco-efficiency performance among those studied and provided a feasible alternative to subsidize the formulation of the policy for small generators of HCW.     

Exposure to Selected Heavy Metals Through Water Ingestion in an Area Under the Influence of Tanneries

This study evaluated the potential toxicological risk posed to human health due to the exposure to heavy metals by water ingestion in an area affected by tanneries – the Cadeia-Feitoria hydrographic basin (Brazil). River water was collected at 10 sites, every 3 months, from July 1999 to April 2000. After acid digestion, total metal concentration was determined by inductively coupled plasma optical emission spectrometry (Cd, Cu, Cr, Ni, Zn), flame atomic absorption (Al, Fe, Pb, Mn), or cold vapor atomic absorption spectrometry (Hg). Cr(VI) was complexed with diphenyl-carbazide and detected by UV–vis spectrometry. In order to quantify the risk of exposure, the risk assessment methodology employed by the Environmental Protection Agency of the United States was applied at a screening level. The assumed scenarios included extreme exposure patterns (ingestion of untreated water, conversion of Cr(III) to Cr(VI), temporal peaks of pollution). Fe, Al, Cd, Hg, and Pb were not included in the risk analysis, since they showed a low toxicity potential or were undetected in the samples. The selected metals presented Hazard Quotients < 1, in the following order of increasing risk: Cu < Cr(III) < Zn < Ni < Mn < Cr(VI). Hazard indexes, representing the additive effect of contaminants, were also low in the basin (< 1), but comparatively increased in the lower reach of Feitoria and Cadeia Rivers. Although noncarcinogenic risk levels did not suggest possible adverse toxicological effects to the human population, a considerable deviation from background conditions was observed downstream the area where tanneries are mainly located.     

Presence of Torque Teno Virus (TTV) in Tap Water in Public Schools from Southern Brazil

Torque teno virus (TTV) was surveyed in tap water collected in schools from three municipalities located in the south of Brazil. TTV genomes were found in 11.7 % (4/34) of the samples. TTV DNA was detected in 10.5 % (2/19) of the samples collected at the city of Caxias do Sul and in 25 % (2/8) of the samples from Pelotas. Those cities have a low rate of sewage treatment. All samples from Santa Cruz do Sul, which has nearly 92 % of its sewage treated, were negative. These results suggest that the amount of sewage treated may have an effect on the detection rates of TTV DNA in drinking water in a given urban area, showing a mild negative correlation (r = ?0.76), when comparing the percentage of sewage treatment to the detection of TTV genomes. The detection rate of TTV was also compared with Escherichia coli, showing a strong correlation (r = 0.97), indicating that TTV may be a suitable marker of fecal contamination.     

Environmental Impact and Sustainable Development: An Analysis in the Context of Standards ISO 9001, ISO 14001, and OHSAS 18001

In this study, we seek to verify the contributions made by three international standards to efforts by eight companies to reduce their environmental impacts and move toward sustainable development. The standards considered in this article are the International Organization for Standardization's (ISO) 9001 (quality), ISO 14001 (environmental management systems), and the Occupational Health and Safety Assessment Series (OHSAS) 18001. The eight companies analyzed for this study are located in the state of Rio Grande do Sul in Brazil. As part of this work, the authors generated a proposed sustainable positioning matrix and placed each company within one of four quadrants—economic approach, environmental approach, social approach, and sustainability approach—derived from the context of the Triple Bottom Line (Elkington, 2004 ).     

Environmental performance evaluation of agro-industrial innovations – Part 2: methodological approach for performing vulnerability analysis of watersheds

Environmental vulnerability analysis has been sparsely used in environmental performance evaluation (EPE) of technological innovations. The present paper proposes a methodological approach to carry out vulnerability analysis of watersheds and to integrate this analysis into methods of environmental performance evaluation of agro-industrial innovations. This approach is applied to the Ambitec-Life Cycle method, described in Part 1 (this issue) of this study. The case study of green coconut substrate compared to ripe coconut substrate, also described in Part 1 (this issue), is now presented considering the vulnerability analysis of the watersheds where the life cycle stages of these products occur. The integration of vulnerability analysis in Ambitec-Life Cycle contributes to a better understanding of the environmental aspects of agro-industrial technological innovations with potential to cause significant impacts in watersheds where these innovations are implemented.