226Ra bioavailability to plants at the Urgeiriça uranium mill tailings site

Large amounts of solid wastes (tailings) resulting from the exploitation and treatment of uranium ore at the Urgeiri?a mine (north of Portugal) have been accumulated in dams (tailing ponds). To reduce the dispersion of natural radionuclides into the environment, some dams were revegetated with eucalyptus (Eucalyptus globolus) and pines (Pinus pinea). Besides these plants, some shrubs (Cytisus spp.) are growing in some of the dams. The objective of this study is to determine the 226Ra bioavailability from uranium mill tailings by quantifying the total and available fraction of radium in the tailings and to estimate its transfer to plants growing on the tailing piles. Plant and tailing samples were randomly collected and the activity concentration of 226Ra in plants (aerial part and roots) and tailings was measured by gamma-spectrometry. The exchangeable fraction of radium in tailings was quantified using one single step extraction with 1 mol dm-3 ammonium acetate (pH = 7) or 1 mol dm-3 calcium chloride solutions. The results obtained for 226Ra uptake by plants show that 226Ra concentration ratios for eucalyptus and pines decrease at low 226Ra concentrations in the tailings and appear relatively constant at higher radium concentrations. For shrubs, the concentration ratios increase at higher 226Ra solid waste concentrations approaching a saturation value. Percentage values of 16.0 +/- 8.3 and 12.9 +/- 8.9, for the fraction of radium extracted from the tailings, using 1 mol dm-3 ammonium acetate or calcium chloride solutions, respectively, were obtained. The 226Ra concentration ratios determined on the basis of exchangeable radium are one order of magnitude higher than those based on total radium. It can be concluded that, at a 95% confidence level, more consistent 226Ra concentration ratios were obtained when calculated on the basis of available radium than when total radium was considered, for all the dams.     

Mineralization of Poly(ɛ-caprolactone)/Adipate Modified Starch Blend in Agricultural Soil

The biodegradability properties of poly(ɛ-caprolactone) (PCL) and modified adipate-starch (AS) blends, using Edenol-3203 (E) as a starch plasticizer, were investigated in laboratory by burial tests of the samples in previously analyzed agricultural soil. The biodegradation process was carried out using the respirometric test according to ASTM D 5988-96, and the mineralization was followed by both variables such as carbon dioxide evolution and mass loss. The results indicated that the presence of AS-E accelerated the biodegradation rate as expected.     

Analysis of Appropriate Timescales for Water Diversion Permits in Brazil

Agreement on the criteria for granting the right to use water resources between governing bodies represents a significant advance in the process of sharing water use. To aid water resource management agencies in optimizing water use, the impact of using different criteria for permitting water use in the Paracatu river basin, Brazil, was evaluated in this study. The streamflow criteria corresponding to 30 % of the annual Q_7,10 (used by the governing body of Minas Gerais), 70 % of the annual Q₉₅ (used by the governing body of the union), 30 % of the monthly Q_7,10, and 70 % of the monthly Q₉₅ were evaluated. The use of criteria based on the monthly streamflow allows for better management of water use because it allows for greater utilization of this resource in times when there is high water availability and imposes a more realistic restriction during critical periods. Substitution of the annual Q_7,10 for the monthly Q_7,10 significantly increases the streamflow permitted in some months, for example, from December to May. Use of the criterion of 70 % of the annual Q₉₅ involves a high risk of drought in critical months, while the criterion of 70 % of the monthly Q₉₅ minimizes this risk.     

Distribution of polycyclic aromatic hydrocarbons in marine sediments and their potential toxic effects

The presence of polycyclic aromatic hydrocarbons (PAHs) in samples of marine sediments from Paranagua Bay on the southern coast of Brazil was investigated. Paranagua Bay is the location of a major port, one of the busiest in Brazil. The region has a great potential for tourism and port-related industries and activities. Due to its characteristics as a venue for tourism, two major campaigns were planned: one 3 months before the summer (between December and February) and a second after the vacation season. Total concentration of PAHs in sediments ranged from 26.33 to 406.76 ng/g (in both campaigns). The highest values were found in sediments with higher organic carbon content. We found no substantial differences between the two campaigns, and the values are quite similar. Ternary diagrams show that points P5 and P6 were considered polluted, while others were classified as non-polluted. Molecular ratios indicate that the main sources of PAHs are petrogenic and the burning of fossil fuels. Sediment toxicity was assessed by the presence of PAHs in terms of benzo(a)pyrene (BaP) concentration. The toxicity of PAHs mixtures can be characterized more accurately by developing and establishing toxic equivalency factors (TEFs) for PAHs. Considering TEFs, the BaP_eq concentrations vary between 0.264 and 5.922 ng/g (considering both campaigns). Thus, two points are above the maximum level recommended (3 ng/g) by the Netherlands sediment quality guidelines. In fact, sites P5 and P6 apparently are exposed to a greater number of pollution sources, thus reflecting the higher concentration of PAHs compounds in sediments.     

Measurements and modeling of reactive nitrogen deposition in southeast Brazil

Increased reactive nitrogen (N_r) deposition due to expansion of agro-industry was investigated considering emission sources, atmospheric transport and chemical reactions. Measurements of the main inorganic nitrogen species (NO₂, NH₃, HNO₃, and aerosol nitrate and ammonium) were made over a period of one year at six sites distributed across an area of ∼130,000 km² in southeast Brazil. Oxidized species were estimated to account for ∼90% of dry deposited N_r, due to the region’s large emissions of nitrogen oxides from biomass burning and road transport. NO₂-N was important closer to urban areas, however overall HNO₃-N represented the largest component of dry deposited N_r. A simple mathematical modeling procedure was developed to enable estimates of total N_r dry deposition to be made from knowledge of NO₂ concentrations. The technique, whose accuracy here ranged from <1% to 29%, provides a useful new tool for the mapping of reactive nitrogen deposition.     

Batch test assessment of waste-to-energy combustion residues impacts on precipitate formation in landfill leachate collection systems

Disposal practices for bottom ash and fly ash from waste-to-energy (WTE) facilities include emplacement in ash monofills or co-disposal with municipal solid waste (MSW) and residues from water and wastewater treatment facilities. In some cases, WTE residues are used as daily cover in landfills that receive MSW. A recurring problem in many landfills is the development of calcium-based precipitates in leachate collection systems. Although MSW contains varying levels of calcium, WTE residues and treatment plant sludges have the potential to contribute concentrated sources of leachable minerals into landfill leachates. This study was conducted to evaluate the leachability of calcium and other minerals from residues generated by WTE combustion using residues obtained from three WTE facilities in Florida (two mass-burn and one refuse-derived fuel). Leaching potential was quantified as a function of contact time and liquid-to-solid ratios with batch tests and longer-term leaching tests using laboratory lysimeters to simulate an ash monofill containing fly ash and bottom ash. The leachate generated as a result of these tests had total dissolved solid (TDS) levels ranging from 5 to 320 mg TDS/g ash. Calcium was a major contributor to the TDS values, contributing from 20 to 105 g calcium/kg ash. Fly ash was a major contributor of leachable calcium. Precipitate formation in leachates from WTE combustion residues could be induced by adding mineral acids or through gas dissolution (carbon dioxide or air). Stabilization of residual calcium in fly ashes that are landfilled and/or the use of less leachable neutralization reagents during processing of acidic gases from WTE facilities could help to decrease the calcium levels in leachates and help to prevent precipitate formation in leachate collection systems.     

Quality and sustainability in the production process: A study of bakeries using an integrated multi-criteria method based on fuzzy AHP and fuzzy TOPSIS

The objective of the present study is to evaluate, determine, and apply alternatives for improving the quality of the process and the product, with an emphasis on sustainable practices, using an integrated multi-criteria method. For this purpose, an analysis was conducted at a chain of bakeries, aiming to highlight bottlenecks in the production process and in the product. With the support of a literature review, four criteria and seven alternatives were defined to overcome these bottlenecks and, at the same time, contribute to the sustainability of the organization. For data analysis, six decision makers were interviewed and, following their evaluations, an integrated method based on fuzzy AHP and fuzzy TOPSIS was created. The fuzzy AHP was adopted to establish the importance of the criteria, while the fuzzy TOPSIS was used to evaluate and classify the alternatives developed to bypass the bottlenecks. The results revealed that of the criteria, Criterion “Cr1 – Quality” was prioritized. On the other hand, the alternative with the best performance was “A3 – Physical Layout Reorganization”. Applying this alternative, the study demonstrates the results achieved such as reduction of errors and accident risks, as well as greater fluidity in the productive space. the present study also makes theoretical and managerial contributions to the field, bringing the theory closer to the reality of companies that operate in the food sector.     

Model for sustainability implementation and measurement in construction sites

Sustainable practices at construction sites should be considered from the start of the project, meaning during the design phase. A model for the implementation of sustainability at a site is an important management tool, and its adoption can indicate good practices and propose an assessment of local conditions. Thus, the main contribution of this article is to propose a practical model to evaluate the level of implementation of sustainable practices at construction sites. The model was based on sustainability certifications and validated at six construction sites in Brazil. The results indicate that construction companies that possess environmental certifications have better levels of implementation of good practices at their work sites. However, it was noted that it is not necessary for a company to obtain an environmental certification; rather, it is necessary for sustainability strategies to become corporate culture.     

The use of sewage sludge as remediation for imidacloprid toxicity in soils

Environmental Science and Pollution Research - This study investigated the influence of the sewage sludge (SS) soil amendment on the chronic toxicity of imidacloprid (through the seed dressing...