Soil moisture determines the effectiveness of two urease inhibitors to decrease N<Subscript>2</Subscript>O emission

Among the mitigation strategies to prevent nitrogen (N) losses from ureic fertilizers, urease inhibitors (UIs) have been demonstrated to promote high N use efficiency by reducing ammonia (NH₃) volatilization. In the last few years, some field experiments have also shown its effectiveness in reducing nitrous oxide (N₂O) losses from fertilized soils under conditions of low soil moisture. An incubation experiment was carried out with the aim of assessing the main biotic mechanisms behind N₂O emissions once that the UIs N-(n-butyl) thiophosphoric triamid (NBPT) and phenil phosphorodiamidate (PPDA) were applied with Urea (U) under different soil moisture conditions (40, 60 and 80 % water-filled pore space, WFPS). In the same study we tried to analyze to what extent soil WFPS regulates the effect of these inhibitors on N₂O emissions. The use of PPDA in our study allowed us to compare the effect of NBPT with that of another commercially available urease inhibitor, aiming to see if the results were inhibitor-specific or not. Based on the results from this experiment, a WFPS (i.e. 60 %) was chosen for a second study (i.e. mesocosm experiment) aiming to assess the efficiency of the UIs to indirectly affect N₂O emissions through influencing the pool of soil mineral N. The N₂O emissions at 40 % WFPS were almost negligible, being significantly lower from all fertilized treatments than that produced at 60 and 80 % WFPS. When compared to U alone, NBPT+U reduced the N₂O emissions at 60 % WFPS but had no effect at 80 % WFPS. The application of PPDA significantly increased the emissions with respect to U at 80 % WFPS whereas no significant effect was found at 60 %. At 80 % WFPS, denitrification was the main source of N₂O emissions for all treatments. In the mesocosm study, the application of NBPT+U was an effective strategy to reduce N₂O emissions (75 % reduction compared to U alone), due to a lower soil ammonium (NH₄ ⁺) content induced by the inhibitor. These results suggest that adequate management of the UI NBPT could provide, under certain soil conditions, an opportunity for mitigation of N₂O emissions from fertilized soils.     

Impact of Drip Irrigation Method,Soil, and Virus Type on Tomato and Cucumber Contamination

The goal of this study was to better quantify the degree of viral contamination of tomato and cucumber in relationship to virus type, soil type, and irrigation method. Tomatoes and cucumbers were grown in ten-gallon (37.8 L) buckets filled with Pima clay loam or Brazito sandy loam soils. Plants were irrigated with secondary wastewater effluent using surface drip irrigation or subsurface drip irrigation. At specified time intervals irrigation water was seeded with bacteriophages MS-2 and P22, poliovirus type 1 (PV1), enteric adenovirus 40 (Ead 40), and hepatitis A virus. Surface drip irrigation always resulted in viral contamination of both the above and below ground parts of both crops. The roots showed the greatest level of contamination, followed by leaves and fruits. In contrast, with subsurface drip irrigation no viruses were detected in any of the above ground plant surfaces. It was found that under similar soil type and irrigation method, risk of crop contamination was similar for all of the viruses studied. It can be concluded that method of irrigation is the single most critical factor in the contamination trend of different parts of crop plants. Plant parts can be categorized into three groups (root, stem, and leaf/fruit) based on the risk of viral contamination from irrigation water.     

Environmental Impact Assessment Regulation in Hong Kong and Shanghai: A Cross-city Analysis

Cross-city analysis in environmental regulation within non-democratic political systems is a neglected area. Taking policy convergence and styles of regulation as the focus, this paper has taken an initial step to compare the environmental impact assessment (EIA) regulation in Hong Kong and Shanghai. In this comparative exercise, it is identified that policy convergence occurs more explicitly in policy ideology and policy consequences, whereas divergence takes place in policy content, regulatory process and public consultation. Convergence, however, is only superficial whereas divergence is substantial. Indeed EIA systems of these two jurisdictions have displayed contrasting styles of regulation. The formal EIA system in Shanghai is dominated by the environmental agency, which regulates informal politics in the EIA process within a legal format. The informal EIA system in Hong Kong is co-ordinated by the environmental agency, which seeks active co-operation with the clients in a consultative EIA process in an informal and discretionary manner. What makes the Hong Kong system superior to the Shanghai system is the existence of institutional channels for public consultation. Within a non-democratic political setting, the EIA process in Hong Kong is more transparent and the EIA system is more accountable to the public, whereas the EIA process in Shanghai is lacking in transparency and the EIA system is under tight bureaucratic control.     

Mechanism of complexation of toxic arsenate,selenate, and molybdate with hydrotalcites

Environmental Chemistry Letters - Wastewater from the uranium mining industry contains toxic arsenate (AsO43–), selenate (SeO42–), and molybdate (MoO42–) that can be removed by...     

Identification, analysis and dissemination of information on near misses: A case study in the construction industry

Near misses are well-known for providing a major source of useful information for safety management. They are more frequent events than accidents and their causes may potentially result in an accident under slightly different circumstances. Despite the importance of this type of feedback, there is little knowledge on the characteristics of near misses, and on the use of this information in safety management. This article proposes guidelines for identifying, analyzing and disseminating information on near misses in construction sites. In particular, it is proposed that near misses be analyzed based on four categories: (a) whether or not it was possible to track down the event; (b) the nature of each event, in terms of its physical features (e.g. falling objects); (c) whether they provided positive or negative feedback for the safety management system; and (d) risk, based on the probability and severity associated with each event. The guidelines were devised and tested while a safety management system was being developed in a healthcare building project. The monitoring of near misses was part of a safety performance measurement system. Among the main results, a dramatic increase in both the number and quality of reports stands out after the workforce was systematically encouraged to report. While in the first 4 months of the study – when the workforce was not encouraged to report – there were just 12 reports, during the subsequent 4 months – when the workforce was so encouraged – there were 110 reports, all of them being analyzed based on the four analytical categories proposed.     

Estimation of chemical concentration due to fugitive emissions during chemical process design

Fugitive emissions are not an environmental concern alone, but are also a health concern. From occupational health standpoint, fugitive emissions are the main sources of origin of the continuous exposure to workers. Operating plants regularly measure release and concentration levels through a plant-monitoring program. However, for processes which are still ‘on paper’, predictive estimation methods are required. Therefore, three methods for estimating concentration of the fugitive emissions are presented for the process development and design phases of petrochemical processes. The methods estimate the fugitive emission rates and plant plot dimensions resulting to fugitive emission concentrations. The methods were developed for the type and amount of information available in three process design stages; conceptual design, preliminary process design, and detailed process design. The methods are applied on a real benzene plant; the estimated benzene concentrations are compared to the actual concentration measured at the plant. The results show that as the information mounts up during design, the concentration estimate becomes more accurate. The results indicate that the methods presented provide simple estimates of fugitive emission-based concentrations during the design stages.     

Predicting the relative oral bioavailability of naturally occurring As,Cd and Pb from in vitro bioaccessibility measurement: implications for human soil ingestion exposure assessment

Environmental Geochemistry and Health - Chestnut soils developed over mineralized areas of southwestern Spain are characterized by high baseline concentrations of geogenic trace elements, notably...     

Vertical growth in a coastal city: an analysis of Boa Viagem (Recife,Brazil)

Coastal zones around the world have experienced urban growth in the last 50 years. This landscape change brings new aspects for those zones and the environment. Real estate speculation is a decisive factor that changes landscape, with urban growth that occurs both in the extent and volume of construction. Boa Viagem (BV) beach at Recife, Northeast Brazil was just a sand bar covered by an Atlantic Forest until middle of the 1800s. Today, it has turned into a busy area of the city where residences, services and commerce co-exist in a densely packed arrangement. This work demonstrates and analyses vertical growth in BV and urban changes from 1961 to 2011. It was developed using digital image processing and visual analysis of satellite imagery and aerial photos. A GIS was created using SPRING and ArcScene, to calculate variations in area and volume creating a Volumetric Index (VI). The Minimal Mapping Area was used in sixteen census tract as samples of the area. Occupation and vertical growth were especially accentuated from 1981 to 1996 with the peak at 2011. Increases in vertical growth from shore to inland are evident in all parts of the district. This finding was confirmed by three-dimensional GIS representations of the study area and the VI during the period of this work, showing the potential of 3D GIS models for studying dense urbanization areas in coastal zones.     

Shiny cowbirds share foster mothers but not true mothers in multiply parasitized mockingbird nests

Obligate brood parasitic birds, such as cowbirds, evade parental care duties by laying their eggs in the nests of other species. Cowbirds are assumed to avoid laying repeatedly in the same nest so as to prevent intrabrood competition between their offspring. However, because searching for host nests requires time and energy, laying more than one egg per nest might be favoured where hosts are large and can readily rear multiple parasites per brood. Such ‘repeat parasitism’ by females would have important consequences for parasite evolution because young parasites would then incur indirect fitness costs from behaving selfishly. We investigated shiny cowbird (Molothrus bonariensis) parasitism of a large host, the chalk-browed mockingbird (Mimus saturninus), in a population where over 70 % of the parasitized mockingbird nests receive multiple cowbird eggs. We assessed egg maternity directly, using cameras at nests to film the laying of individually-marked females. We also supplemented video data with evidence from egg morphology, after confirming that each female lays eggs of a consistent appearance. From 133 eggs laid, we found that less than 5 % were followed by the same female visiting the nest to lay again or to puncture eggs. Multiple eggs in mockingbird nests were instead the result of different females, with up to eight individuals parasitizing a single brood. Thus, while cowbird chicks regularly share mockingbird nests with conspecifics, these are unlikely to be their maternal siblings. Our results are consistent with shiny cowbird females following a one-egg-per-nest rule, even where hosts can rear multiple parasitic young.