Decontamination of polycyclic aromatic hydrocarbons and nonylphenol from sewage sludge using hydroxypropyl-β-cyclodextrin and evaluation of the toxicity of leachates

A decontamination technique based in cyclodextrin extraction has been developed to eliminate nonylphenol (NP) and 16 polycyclic aromatic hydrocarbons (PAHs; the US Environmental Protection Agency priority pollutants list) from sewage sludge. In a first step, PAHs and NP were characterised in six sludges to determine contamination levels according to limit values proposed by the European Union Sludge Directive draft. There were few variations in the total PAHs content with levels of 1.88 to 3.05 mg kg^?1. Three-ring PAHs predominated, but fluoranthene and pyrene were also present. None of the sludge exceeded the PAHs limit proposed by the European Union’s draft Directive. On the contrary, NP content in four of the six sludges was over the recommended limits of 50 mg kg^-1 for NP ethoxylates. With the aim of obtaining NP values below the concentration limits proposed to use the sewage sludge as agricultural amendments, a preliminary study using hydroxypropyl-β-cyclodextrin (HPBCD) extractions as a decontamination technique was carried out. About 90 % of NP content was removed with only one extraction with HPBCD, whereas after three sequential extractions using an aqueous solution without HPBCD, the NP extraction percentage was less than 1 %. Simultaneously, PAHs extraction percentages obtained with HPBCD were also much higher than when aqueous solution was used, especially in the case of two- and three-ring PAHs. Finally, the potential environmental hazard of HPBCD leachates to aquatic organisms (Daphnia magna) was tested. These results indicate that the treatment of sewage sludge with cyclodextrin could allow their safe use as fertiliser in agriculture.     

Drivers influencing adaptive management: a retrospective evaluation of water quality decisions in South East Queensland (Australia)

This article analyzes interviews with natural resource managers in South East Queensland (SEQ), Australia. The objectives of the research are (i) to apply and test deductive/inductive text analysis methods for constructing a conceptual model of water quality decision-making in SEQ, (ii) to understand the role of information in the decision-making process, and (iii) to understand how to improve adaptive management in SEQ. Our methodology provided the means to quickly and objectively explore interview data and also reduce potential subjective bias normally associated with deductive text analysis methods. At a more practical level, our methodology indicates potential intervention points if one is to influence the decision-making process in the region. Results indicate that relevant information is often ignored in SEQ, with significant consequences for adaptive management. Contextual factors (political, social, and environmental) together with effective communication or lobbying strategies often prevent evidence-based decisions. We propose that in addition to generating information to support decisions, adaptive management also requires an appraisal of the true character of the decision-making process, which includes how stakeholders interact, what information is relevant and salient to management, and how the available information should be communicated to stakeholders and decision-making bodies.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-014-0537-4) contains supplementary material, which is available to authorized users.     

Decontamination of produced water containing petroleum hydrocarbons by electrochemical methods: a minireview

Produced water (PW) is the largest waste stream generated in oil and gas industries. The drilling and extraction operations that are aimed to maximize the production of oil may be counterbalanced by the huge production of contaminated water (called PW) with pollutants, such as heavy metals, dissolved/suspended solids, and organic compounds. PW is conventionally treated through different physical, chemical, and biological methods. In offshore platforms, because of space constraints, compact physical and chemical systems are used. However, major research efforts are being developed with innovative technologies for treating PW in order to comply with reuse and discharge limits. Among them, electrochemical technologies have been proposed as a promising alternative for the treatment of this kind of wastewaters. Then, this paper presents a minireview of efficient electrochemical technologies used until now for treating PW generated by petrochemical industry.     

Genotoxicity and histological alterations in grey mullet Mugil liza exposed to petroleum water-soluble fraction (PWSF)

Petroleum hydrocarbons are considered one of the main organic chemicals found in water bodies. In the present study, the median lethal concentration (LC₅₀) was estimated for mullet Mugil liza after acute exposure to petroleum water-soluble fraction (PWSF). Furthermore, histopathological studies and micronuclei frequency were also performed in order to observe deleterious effects of medium-term exposition to PWSF. Mullets (25?±?2.3 g) were exposed to chronic concentrations (1.7, 3.5 and 7 % of PWSF), plus the control group, for 14 and 7 days of clearance time. Throughout the experimental period (1, 4, 14 and 21 days), blood samples were collected for analysis of micronucleus (MN) and liver and gills for histopathological study. For these procedures, seven fish were sampled per concentration tested. The LC₅₀-96 h was estimated at 37.5 % of the PWSF. The time required for MN induction was 96 h of exposure. The time of clearance was sufficient to achieve a MN frequency similar to that of the control group. Histopathological studies showed severe changes in the gill and liver tissues. The most relevant histopathology in the gills was telangiectasia. Hepatic histopathology such as cholestasis, dilated sinusoids and inflammatory infiltrates were commonly described. The MN test and histological study effectively detected damages caused by medium-term exposition to the PWSF, and despite the toxicity, a few days without exposure can minimize PWSF genotoxicity in juveniles of M. liza.     

Integration of geophysical,geochemical and microbiological data for a comprehensive small-scale characterizationof an aged LNAPL-contaminated site

Characterization of aged hydrocarbon-contaminated sites is often a challenge due to the heterogeneity of subsurface conditions. Geoelectrical methods can aid in the characterization of such sites due to their non-invasive nature, but need to be supported by geochemical and microbiological data. In this study, a combination of respective methods was used to characterize an aged light non-aqueous phase liquid-contaminated site, which was the scene of a crude oil blow-out in 1994. As a consequence, a significant amount of crude oil was released into the subsurface. Complex resistivity has been acquired, both along single boreholes and in cross-hole configuration, in a two-borehole test site addressed with electrodes, to observe the electrical behaviour at the site over a two-year period (2010–2011). Geoelectrical response has been compared to results of the analysis of hydrocarbon contamination in soil and groundwater samples. Geochemical parameters of groundwater have been observed by collecting samples in a continuous multi-channel tubing (CMT) piezometer system. We have also performed a biological characterization on soil samples by drilling new boreholes close to the monitoring wells. Particular attention has been given to the characterization of the smear zone that is the sub-soil zone affected by the seasonal groundwater fluctuations. In the smear zone, trapped hydrocarbons were present, serving as organic substrate for chemical and biological degradation, as was indicated by an increase of microbial biomass and activity as well as ferrogenic-sulfidogenic conditions in the smear zone. The results show a good agreement between the intense electrical anomaly and the peaks of total organic matter and degradation by-products, particularly enhanced in the smear zone.     

Cyprodinil retention on mixtures of soil and solid wastes from wineries. Effects of waste dose and ageing

In spite of its wide-world economic relevance, wine production generates a huge amount of waste that threatens the environment. A batch experiment was designed to assess the effect of the amendment of an agricultural soil with two winery wastes (perlite and bentonite wastes) in the immobilization of cyprodinil. Waste addition (0, 10, 20, 40, and 80 Mg ha^?1) and different times of incubation of soil-waste mixtures (1, 30, and 120 days) were tested. The addition of wastes improved the soil’s ability to immobilize cyprodinil, which was significantly correlated to total C content in soil-waste mixtures. Longer incubation times decreased the cyprodinil sorption possibly due to the mineralization of organic matter but also as a consequence of the high pH values reached after bentonite waste addition (up to 10.0). Cyprodinil desorption increased as the amount of waste added to soil, and the incubation time increased. The use of these winery wastes contributes to a more sustainable agriculture preventing fungicide mobilization to groundwater.     

Continuous flow photo-Fenton treatment of ciprofloxacin in aqueous solutions using homogeneous and magnetically recoverable catalysts

The degradation of ciprofloxacin was studied in aqueous solutions by using a continuous flow homogeneous photo-Fenton process under simulated solar light. The effect of different operating conditions on the degradation of ciprofloxacin was investigated by changing the hydrogen peroxide (0–2.50 mM) and iron(II) sulphate (0–10 mg Fe L^?1) concentrations, as well as the pH (2.8–10), irradiance (0–750 W m^?2) and residence time (0.13–3.4 min) of the process. As expected, the highest catalytic activity in steady state conditions was achieved at acidic pH (2.8), namely 85 % of ciprofloxacin conversion, when maintaining the other variables constant (i.e. 2.0 mg L^?1 of iron(II), 2.50 mM of hydrogen peroxide, 1.8 min of residence time and 500 W m^?2 of irradiance). Additionally, magnetite magnetic nanoparticles (ca. 20 nm of average particle size) were synthesized, characterized and tested as a possible catalyst for this reaction. In this case, the highest catalytic activity was achieved at natural pH, namely a 55 % average conversion of ciprofloxacin in 1.8 min of residence time and under 500 W m^?2. Some of the photocatalytic activity was attributed to Fe²⁺ leaching from the magnetic nanoparticles to the solution.     

Designing conservation-development policies for the forest frontier

The conservation of forests in expanding frontier landscapes is critically important to maintain intact forest ecosystems and support forest dependent communities. To conserve frontier forests, policy approaches are needed that conserve forests and advance the well-being of local resource dependent communities. To identify such approaches, the forest conservation and development framework (FCDF) was designed to find place-based conservation-development policies that target system leverage-points influencing land-use practices. To demonstrate the utility of the FCDF, a portfolio of conservation-development policies were identified for Peru’s Manu-Tambopata Corridor (MAT) and evaluated by local land-users. Results of the MAT case study show high levels of interest in the proposed policies, but a wide variation in interest levels relative to personal circumstances and policies proposed. Barriers to implementing conservation-development policies in frontier environments were also identified, including high value land-use alternatives generating high opportunity costs for accepting PES payments (e.g., REDD+), insecure land tenure and conflicting authorizations limiting land-users policy choices, and broad demographic diversity among local land-users. Collectively, this research suggests the FCDF is a useful approach for identifying policies matched to local conditions that advance conservation and human development. This research also indicates policy design in frontier environments is most effective when adapted to local conditions, seeks to identify a mix of complementary policies, and is targeted at key system variables influencing land-use practices (i.e., system leverage-points). Importantly, the MAT case study also highlights how even in rapidly changing frontier landscapes, land-users are interested in policies that advance conservation and development goals.     

Measuring and modeling nitrous oxide and methane emissions from beef cattle feedlot manure management: First assessments under Brazilian condition

Intensive beef production has increased during recent decades in Brazil and may substantially increase both methane (CH₄) and nitrous oxide (N₂O) emissions from manure management. However, the quantification of these gases and methods for extrapolating them are scarce in Brazil. A case study examines CH₄ and N₂O emissions from one typical beef cattle feedlot manure management continuum in Brazil and the applicability of Manure-DNDC model in predicting these emissions for better understand fluxes and mitigation options. Measurements track CH₄ and N₂O emissions from manure excreted in one housing floor holding 21 animals for 78 days, stockpiled for 73 days and field spread (360 kg N ha^?1). We found total emissions (CH₄ + N₂O) of 0.19 ± 0.10 kg CO₂eq per kg of animal live weight gain; mostly coming from field application (73%), followed housing (25%) and storage (2%). The Manure-DNDC simulations were generally within the statistical deviation ranges of the field data, differing in ?28% in total emission. Large uncertainties in measurements showed the model was more accurate estimating the magnitude of gases emissions than replicate results at daily basis. Modeled results suggested increasing the frequency of manure removal from housing, splitting the field application and adopting no-tillage system is the most efficient management for reducing emissions from manure (up to about 75%). Since this work consists in the first assessment under Brazilian conditions, more and continuous field measurements are required for decreasing uncertainties and improving model validations. However, this paper reports promising results and scientific perceptions for the design of further integrated work on farm-scale measurements and Manure-DNDC model development for Brazilian conditions.     

Metabolism of nC11 fatty acid fed to Trichoderma koningii and Penicillium janthinellum II: Production of intracellular and extracellular lipids

Abstract

Little is known about the fungal metabolism of nC₁₀ and nC₁₁ fatty acids and their conversion into lipids. A mixed batch culture of soil fungi, T. koningii and P. janthinellum, was grown on undecanoic acid (UDA), a mixture of UDA and potato dextrose broth (UDA+PDB), and PDB alone to examine their metabolic conversion during growth. We quantified seven intracellular and extracellular lipid classes using Iatroscan thin-layer chromatography with flame ionization detection (TLC-FID). Gas chromatography with flame ionization detection (GC-FID) was used to quantify 42 individual fatty acids. Per 150 mL culture, the mixed fungal culture grown on UDA+PDB produced the highest amount of intracellular (531 mg) and extracellular (14.7 mg) lipids during the exponential phase. The content of total intracellular lipids represented 25% of the total biomass-carbon, or 10% of the total biomass dry weight produced. Fatty acids made up the largest class of intracellular lipids (457 mg/150 mL culture) and they were synthesized at a rate of 2.4 mg/h during the exponential phase, and decomposed at a rate of 1.8 mg/h during the stationary phase, when UDA+PDB was the carbon source. Palmitic acid (C_16:0), stearic acid (C_18:0), oleic acid (C_18:1), linoleic acid (C_18:2) and vaccenic acid (C_18:1) accounted for >80% of the total intracellular fatty acids. During exponential growth on UDA+PDB, hydrocarbons were the largest pool of all extracellular lipids (6.5 mg), and intracellularly they were synthesized at a rate of 64 μg/h. The mixed fungal species culture of T. koningii and P. janthinellum produced many lipids for potential use as industrial feedstocks or bioproducts in biorefineries.