Trace element concentrations in soil, corn leaves, and grain after cessation of biosolids applications

From 1974 to 1984, 543 Mg ha(-1) of biosolids were applied to portions of a land-reclamation site in Fulton County, IL. Soil organic C increased to 5.1% then decreased significantly (p < 0.01) to 3.8% following cessation of biosolids applications (1985-1997). Metal concentrations in amended soils (1995-1997) were not significantly different (p > 0.05) (Ni and Zn) or were significantly lower (p < 0.05) (6.4% for Cd and 8.4% for Cu) than concentrations from 1985-1987. For the same biosolids-amended fields, metal concentrations in corn (Zea mays L.) either remained the same (p > 0.05, grain Cu and Zn) or decreased (p < 0.05, grain Cd and Ni, leaf Cd, Cu, Ni, Zn) for plants grown in 1995-1997 compared with plants grown immediately following termination of biosolids applications (1985-1987). Biosolids application increased (p < 0.05) Cd and Zn concentrations in grain compared with unamended fields (0.01 to 0.10 mg kg(-1) for Cd and 23 to 28 mg kg(-1) for Zn) but had no effect (p > 0.05) on grain Ni concentrations. Biosolids reduced (p < 0.05) Cu concentration in grain compared with grain from unamended fields (1.9 to 1.5 mg kg(-1)). Biosolids increased (p < 0.05) Cd, Ni, and Zn concentrations in leaves compared with unamended fields (0.3 to 5.6 mg kg(-1) for Cd, 0.2 to 0.5 mg kg(-1) for Ni, and 32 to 87 mg kg(-1) for Zn), but had no significant effect (p > 0.05) on leaf Cu concentrations. Based on results from this field study, USEPA's Part 503 risk model overpredicted transfer of these metals from biosolids-amended soil to corn.     

Expediting sustainable brownfields redevelopment by applying Triad using the membrane interface probe

Redevelopment and reuse plans are often based upon an expedited delineation and remediation life cycle, since delayed reuse usually has economic consequences. It has also become increasingly important to utilize sustainable practices to achieve investigation and remediation goals. In this article, the Triad approach is used to expedite the delineation of a source area within a municipal landfill to complete the remedial effort prior to construction of an urban civic center. The Triad approach uses the three elements of systematic project planning, dynamic work strategy, and real‐time measurement to expedite site characterization (Interstate Technology and Regulatory Council, 2003). In this article, the Triad sampling strategy consisted of two phases. The first phase included in situ screening of soil and groundwater using the membrane interface probe (MIP), and the second phase included confirmatory sampling via vertical profiles in the soil and groundwater. This study found that, using the MIP in a dynamic sampling strategy, a critical element of the Triad approach, combined with the proper placement of confirmatory samples, significantly reduced overall project cost and will expedite the site redevelopment. The use of the Triad approach also contributed to the integration of green and sustainable practices into the project. © 2010 Wiley Periodicals, Inc.     

Statistical control in correlational studies: 10 essential recommendations for organizational researchers

Statistical control is widely used in correlational studies with the intent of providing more accurate estimates of relationships among variables, more conservative tests of hypotheses, or ruling out alternative explanations for empirical findings. However, the use of control variables can produce uninterpretable parameter estimates, erroneous inferences, irreplicable results, and other barriers to scientific progress. As a result, methodologists have provided a great deal of advice regarding the use of statistical control, to the point that researchers might have difficulties sifting through and prioritizing the available suggestions. We integrate and condense this literature into a set of 10 essential recommendations that are generally applicable and which, if followed, would substantially enhance the quality of published organizational research. We provide explanations, qualifications, and examples following each recommendation. Copyright © 2015 John Wiley & Sons, Ltd.     

ANALYSIS AND PREDICTION OF SURFACE RUNOFF IN AN URBANIZING WATERSHED USING SATELLITE IMAGERY1

ABSTRACT: This paper demonstrates how satellite image data [e.g., from Landsat 5 Thematic Mapper (TM)], in conjunction with an urban growth model and simple runoff calculations, can be used to estimate future surface runoff and, by implication, water quality within a watershed. To illustrate the method, predictions of land use change and surface runoff are shown for Spring Creek Watershed, a medium sized urbanizing watershed in Central Pennsylvania. Land cover classifications for this watershed were created from images for summertime 1986 and 1996 and subsequently used as input to the Clarke urban growth model, called SLEUTH, to predict land use changes to the year 2025. Simulations with this model show a progressive growth in the percentage of urban pixels and in impervious surface area in the watershed but also an increase in woodland, primarily in previously clear‐cut areas. Given that woodland area will continue to increase in area, surface runoff into Spring Creek is predicted to remain only slightly above present level. However, should the woodland amount fail to increase, surface runoff is then predicted to increase more significantly during the next 25 years. Finally, the concept of urban sprawl is addressed within the context of predicted increases in urbanization by relating the implied increase in impervious surface area to population density within the watershed.     

Feasibility and costs of phosphorus application limits on 39 U.S. swine operations

Concerns about manure P and water quality have prompted new regulations imposing P limits on land application of manure. Previous research established that P limits increase land needs for animal feeding operations. We evaluated the effect of N, annual P, and rotation P limits on the feasibility of manure management. A mechanistic model characterized manure management practices on 39 swine operations (20 unagitated lagoon and 19 slurry operations) in five states (Iowa, Missouri, North Carolina, Oklahoma, and Pennsylvania). Extensive information collected from each operation was used to determine effects of manure storage type, ownership structure, and application limits on attributes of manure management. Phosphorus limits had substantially greater effect on slurry operations, increasing land needs 250% (0.3 hectares per animal unit [AU]) and time for manure application 24% (2.5 min AU(-1)) for rotation P limits and 41% (4.4 min AU(-1)) for annual P limits. Annual P limits were infeasible for current land application equipment on two operations and had the greatest effect on time and costs because they required all but three slurry operations to reduce discharge rate. We recommend implementing rotation P limits (not to exceed crop N need) to minimize time effects, allow most farmers to use their current manure application methods, and allow manure to fulfill crop N and P needs in the year of application. Phosphorus limits increased potential manure value but would require slurry operations to recover at least 61% of manure value through manure sales. Phosphorus limits are likely to shape the U.S. swine industry through differential effects on the various sectors of the swine industry.     

Estimating the extinction date of the thylacine with mixed certainty data

The thylacine (Thylacinus cynocephalus), one of Australia's most characteristic megafauna, was the largest marsupial carnivore until hunting, and potentially disease, drove it to extinction in 1936. Although thylacines were restricted to Tasmania for 2 millennia prior to their extinction, recent so‐called plausible sightings on the Cape York Peninsula in northern Queensland have emerged, leading some to speculate the species may have persisted undetected. We compiled a data set that included physical evidence, expert‐validated sightings, and unconfirmed sightings up to the present day and implemented a range of extinction models (focusing on a Bayesian approach that incorporates all 3 types of data by modeling valid and invalid sightings as independent processes) to evaluate the likelihood of the thylacine's persistence. Although the last captive individual died in September 1936, our results suggested that the most likely extinction date would be 1940. Our other extinction models estimated the thylacine's extinction date between 1936 and 1943, and the most optimistic scenario indicated that the species did not persist beyond 1956. The search for the thylacine, much like similar efforts to rediscover other recently extinct charismatic taxa, is likely to be fruitless, especially given that persistence on Tasmania would have been no guarantee the species could reappear in regions that had been unoccupied for millennia. The search for the thylacine may become a rallying point for conservation and wildlife biology and could indirectly help fund and support critical research in understudied areas such as Cape York. However, our results suggest that attempts to rediscover the thylacine will be unsuccessful and that the continued survival of the thylacine is entirely implausible based on most current mathematical theories of extinction.     

Experimental analysis of friction stir forming for dissimilar material joining application

Mass reduction of automotive body structures is a critical part of achieving reduced CO₂ emissions in the automotive industry. There has been significant work on the application of ultra high strength steels and aluminum alloys. However, the next paradigm is the integrated use of both materials, which poses a challenge of how to join the dissimilar materials. Friction stir forming is a new manufacturing process for joining dissimilar materials. The concept of this process is stir heating one material and forming it into a mechanical interlocking joint with the second material. In this research the process was experimentally analyzed in a position controlled robotic friction stir welding machine between aluminum and steel workpieces. New tool geometries were evaluated toward the goal of optimizing joint strength. The significant process parameters were identified and their optimized settings for the current experimental conditions defined using a design of experiments methodology. A scanning electron microscope was used to characterize the bonding and joint structure for single and multi-pin configurations. Two failure modes, aluminum sheet peeling and bonding delamination, i.e. braze fracture, were identified. It was found that the presence of zinc coating on the steel and overall joint geometry greatly affected the joint strength. The aluminum–zinc braze joint appears to be the largest contributor to joint strength for the single-pin joint configuration. The multi-pin geometry enabled a distribution of load to the four pins following fracture of the braze for increased joint toughness and ductility. Thus, the FSF method has been shown to exhibit potential for joining of aluminum to steel.     

Ozone Suppression of White Pine Net Photosynthesis

Reduction in rates of net photosynthesis following exposure to ozone was observed in eastern white pine saplings prior to the development of visible injury. Branches exposed to consecutive doses of 50–80 pphm ozone for 4 hr and 80–90 pphm ozone for 3 hr appeared to have suppressed net photosynthetic rates but results were confounded by diurnal rate variation. Photosynthetic rates of treated branches returned to normal levels following this initial ozone exposure. A second ozonation involving dosages of 90–100 pphm for 5 and 3 hr was sufficient to reduce rates of net photosynthesis by approximately 80 percent.     

Development of a field enhanced photocatalytic device for biocide of coliform bacteria

A field enhanced flow reactor using bias assisted photocatalysis was developed for bacterial disinfection in lab-synthesized and natural waters. The reactor provided complete inactivation of contaminated waters with flow rates of 50 m L/min. The device consisted of titanium dioxide nanotube arrays, with an externally applied bias of up to 6 V. Light intensity, applied voltage, background electrolytes and bacteria concentration were all found to impact the device performance. Complete inactivation of Escherichia coli W3110(~ 8 × 10~3CFU/m L) occurred in 15 sec in the reactor irradiated at 25 m W/cm~2 with an applied voltage of 4 V in a 100 ppm NaCl solution. Real world testing was conducted using source water from Emigration Creek in Salt Lake City, Utah. Disinfection of natural creek water proved more challenging, providing complete bacterial inactivation after 25 sec at 6 V. A reduction in bactericidal efficacy was attributed to the presence of inorganic and organic species, as well as the increase in robustness of natural bacteria.