Monitoring of pathogenic microorganisms contamination during heat drying process of sewage sludge

The sewage sludge from wastewater treatment plant is a potential source of infectious organism. The number and type of pathogens in sludge depends on various factors namely, the wastewater source, the type of treatment plant, and other environmental factors such as the biological medium offered by the sewage sludge. The principal sludge-borne diseases are presented followed by discussion on biological aspect of growth and occurrence. The overall objective of this work is to estimate kinetic reduction of pathogen population in sludge during different thermal-drying process including: the agitated conductive drying, drum drying, solar drying, and fry-drying. The temperature curves were reported from literature except frying data which were determined in experiment. In order to apply the temperature influence on pathogens population, kinetic parameters for the thermal inactivation (D, z-values) were chosen from literature. Values of concentrations of each pathogen were also extracted from scientific review of pathogens in bio-solids. This study conducted to resolve the survival kinetic of Hepatitis A viruses. The result showed that a concentration of 7 × 10⁴ cfu/100 ml initially present in the sewage sludge is significantly reduced during the heat drying processes except the solar plant. The sewage sludge is completely disinfected when heated for 20 min, 10 min, and 10 s, respectively, during the agitated conductive process, vacuum fry-drying, and drum drying process.     

Evaluation of vacuum filter sock surface sample collection method for Bacillus spores from porous and non-porous surfaces

Vacuum filter socks were evaluated for recovery efficiency of powdered Bacillus atrophaeus spores from two non-porous surfaces, stainless steel and painted wallboard and two porous surfaces, carpet and bare concrete. Two surface coupons were positioned side-by-side and seeded with aerosolized Bacillus atrophaeus spores. One of the surfaces, a stainless steel reference coupon, was sized to fit into a sample vial for direct spore removal, while the other surface, a sample surface coupon, was sized for a vacuum collection application. Deposited spore material was directly removed from the reference coupon surface and cultured for enumeration of colony forming units (CFU), while deposited spore material was collected from the sample coupon using the vacuum filter sock method, extracted by sonication and cultured for enumeration. Recovery efficiency, which is a measure of overall transfer effectiveness from the surface to culture, was calculated as the number of CFU enumerated from the filter sock sample per unit area relative to the number of CFU enumerated from the co-located reference coupon per unit area. The observed mean filter sock recovery efficiency from stainless steel was 0.29 (SD = 0.14, n = 36), from painted wallboard was 0.25 (SD = 0.15, n = 36), from carpet was 0.28 (SD = 0.13, n = 40) and from bare concrete was 0.19 (SD = 0.14, n = 44). Vacuum filter sock recovery quantitative limits of detection were estimated at 105 CFU m(-2) from stainless steel and carpet, 120 CFU m(-2) from painted wallboard and 160 CFU m(-2) from bare concrete. The method recovery efficiency and limits of detection established in this work provide useful guidance for the planning of incident response environmental sampling for biological agents such as Bacillus anthracis.     

The potential of animal manure management pathways toward a circular economy: a bibliometric analysis

Environmental Science and Pollution Research - Improper disposal of animal waste is responsible for several environmental problems, causing eutrophication of lakes and rivers, nutrient overload in...