Phylogeography of the Southwestern Atlantic menhaden genus <Emphasis Type="Italic">Brevoortia</Emphasis> (Clupeidae,Alosinae)

Among pelagic fish, the Southwestern Atlantic menhaden genus Brevoortia (Clupeidae, Alosinae) constitutes an important species model to investigate the patterns of genetic differentiation. It is abundant in the Río de la Plata estuary and in the Atlantic coastal lagoons system from Uruguay and Southern Brazil. To access in the taxa discrimination and population structure in Brevoortia we perform a phylogeographic approach based on mitochondrial cytochrome b (cyt-b) sequences including 240 individuals from 16 collecting sites. Among the 720 bp cyt-b sequenced, 199 correspond to variables and 88 to phylogenetically informative sites. High values of haplotype diversity (h = 1.000) and nucleotide diversity (π = 0.061), as well as an average of 0.084 polymorphic segregating sites and 46 different haplotypes were found. Maximum likelihood analysis based on the GTR + I + G model and Bayesian inference strongly support the idea that B. aurea is the only species of the genus inhabiting the Southwestern Atlantic region. Our analyses revealed a complex population pattern characterized by the existence of long-term highly structured genetic assemblages of mixed stocks. Each monophyletic entity included individuals from different collecting sites, different age groups and collected in different years. Our data also suggest that the recruitment of unrelated mtDNA haplotypes carried out by individuals within schools could be occurring in the same nursery areas revealing the existence of many different maternal lineages. A scenario where different simultaneously and successively mixed mtDNA lineages remain historically connected through basal haplotypes among different clades could explains more accurately the complex and ordered metapopulation dynamic found in this pelagic fish.     

Spatial–temporal pattern of bluefin tuna (Thunnus thynnus L. 1758) gonad maturation across the Mediterranean Sea

Atlantic bluefin tuna (BFT; Thunnus thynnus) is a migrating species straddling the North Atlantic Ocean and Mediterranean Sea. It is assumed that this species is divided into a western and an eastern stock, which spawn in the Gulf of Mexico and the Mediterranean Sea, respectively. To learn more about the reproductive behavior of the eastern BFT stock, we tracked gonadal development in adult fish that were sampled between April and July during three consecutive years (2003–2005). Sampling campaigns were carried out using common fishing methods at selected locations within the Mediterranean Sea, namely Levantine Sea, Malta, and Balearic Islands. An additional sampling point, Barbate, was situated northwest of the Straits of Gibraltar along the Atlantic coast. Morphometric parameters such as the total body mass (M _B) and the weights of the gonads (M _G) were recorded, and the respective gonadosomatic index (GSI) values were calculated. The data collected revealed two important trends: (1) GSI values are higher in fish caught in the eastern rather than the western locations across the Mediterranean Sea, and (2) the GSI reaches maximum values between late May and early June in Levantine Sea (eastern Mediterranean Sea), and only 2 and 4 weeks later in the central (Malta) and western (Balearic Islands) locations, respectively. The advanced gonadal development in BFT correlates well with higher sea surface temperatures. Our findings also distinguish the northern Levantine Sea BFT population (mean M _B 78.41 ± 4.13 kg), and the Barbate BFT population with the greatest M _B (all fish sampled > 100 kg). These data reflect a situation in which the eastern Mediterranean basin may function as a habitat for young BFT, until they gain a larger M _B and are able to move to the Atlantic Ocean. However, the existence of genetically discrete BFT populations in the Mediterranean Sea cannot be ruled out.     

Verification of the geographical origin of modeled air-mass trajectories by means of the isotope composition of rainwater during the SALLJEX experiment

The SALLJEX experiment was held during the summer 2002–2003. It consisted of three-dimensional observation of the atmosphere to study the structure of the low level jet along the eastern slopes of the Andes. Daily precipitation water samples were collected at two stations (Resistencia and Salta) in northern Argentina and isotope content was analyzed. The isotope data were used in conjunction with air parcel trajectories obtained from a 3-D kinematic model (3D-MTC) developed by the University of Sao Paulo, Brazil. Values of deuterium excess were related with air masses of continental origin, whilst low values were associated with air masses with longer oceanic trajectories. Furthermore, although data are scarce, results show that oxygen-18 and deuterium excess in rainwater are related with the occurrence of the low level jet.     

A model for estimation of potential generation of waste electrical and electronic equipment in Brazil

Sales of electrical and electronic equipment are increasing dramatically in developing countries. Usually, there are no reliable data about quantities of the waste generated. A new law for solid waste management was enacted in Brazil in 2010, and the infrastructure to treat this waste must be planned, considering the volumes of the different types of electrical and electronic equipment generated.This paper reviews the literature regarding estimation of waste electrical and electronic equipment (WEEE), focusing on developing countries, particularly in Latin America. It briefly describes the current WEEE system in Brazil and presents an updated estimate of generation of WEEE. Considering the limited available data in Brazil, a model for WEEE generation estimation is proposed in which different methods are used for mature and non-mature market products.The results showed that the most important variable is the equipment lifetime, which requires a thorough understanding of consumer behavior to estimate. Since Brazil is a rapidly expanding market, the “boom” in waste generation is still to come. In the near future, better data will provide more reliable estimation of waste generation and a clearer interpretation of the lifetime variable throughout the years.     

Methodology for quantification of waste generated in Spanish railway construction works

In the last years, the European Union (EU) has been focused on the reduction of construction and demolition (C&D) waste. Specifically, in 2006, Spain generated roughly 47million tons of C&D waste, of which only 13.6% was recycled. This situation has lead to the drawing up of many regulations on C&D waste during the past years forcing EU countries to include new measures for waste prevention and recycling. Among these measures, the mandatory obligation to quantify the C&D waste expected to be originated during a construction project is mandated. However, limited data is available on civil engineering projects. Therefore, the aim of this research study is to improve C&D waste management in railway projects, by developing a model for C&D waste quantification. For this purpose, we develop two equations which estimate in advance the amount, both in weight and volume, of the C&D waste likely to be generated in railway construction projects, including the category of C&D waste generated for the entire project.     

Correlation analysis between sulphate content and leaching of sulphates in recycled aggregates from construction and demolition wastes

In some recycled aggregates applications, such as component of new concrete or roads, the total content of soluble sulphates should be measured and controlled. Restrictions are usually motivated by the resistance or stability of the new structure, and in most cases, structural concerns can be remedied by the use of techniques such as sulphur-resistant cements. However, environmental risk assessment from recycling and reuse construction products is often forgotten. The purpose of this study is to analyse the content of soluble sulphate on eleven recycled aggregates and six samples prepared in laboratory by the addition of different gypsum percentages. As points of reference, two natural aggregates were tested. An analysis of the content of the leachable amount of heavy metals regulated by European regulation was included. As a result, the correlation between solubility and leachability data allow suggest a limiting gypsum amount of 4.4% on recycled aggregates. This limit satisfies EU Landfill Directive criteria, which is currently used as reference by public Spanish Government for recycled aggregates in construction works.     

Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling

This paper describes a direct analysis study carried out in a recycling unit for waste electrical and electronic equipment (WEEE) in Portugal to characterize the plastic constituents of WEEE. Approximately 3400 items, including cooling appliances, small WEEE, printers, copying equipment, central processing units, cathode ray tube (CRT) monitors and CRT televisions were characterized, with the analysis finding around 6000 kg of plastics with several polymer types. The most common polymers are polystyrene, acrylonitrile-butadiene-styrene, polycarbonate blends, high-impact polystyrene and polypropylene. Additives to darken color are common contaminants in these plastics when used in CRT televisions and small WEEE. These additives can make plastic identification difficult, along with missing polymer identification and flame retardant identification marks. These drawbacks contribute to the inefficiency of manual dismantling of WEEE, which is the typical recycling process in Portugal. The information found here can be used to set a baseline for the plastics recycling industry and provide information for ecodesign in electrical and electronic equipment production.     

Collection and recycling of electronic scrap: a worldwide overview and comparison with the Brazilian situation

Recycling and the related issue of sustainable development are increasing in importance around the world. In Brazil, the new National Policy on Solid Wastes has prompted discussion on the future of electronic waste (e-waste). Over the last 10 years, different e-waste collection systems and recycling processes have been applied globally. This paper presents the systems used in different countries and compares the world situation to the current Brazilian reality. To establish a recycling process, it is necessary to organize efficient collection management. The main difficulty associated with the implementation of e-waste recycling processes in Brazil is the collection system, as its efficiency depends not only on the education and cooperation of the people but also on cooperation among industrial waste generators, distributors and the government. Over half a million waste pickers have been reported in Brazil and they are responsible for the success of metal scrap collection in the country. The country also has close to 2400 companies and cooperatives involved in recycling and scrap trading. On the other hand, the collection and recycling of e-waste is still incipient because e-wastes are not seen as valuable in the informal sector. The Brazilian challenge is therefore to organize a system of e-waste management including the informal sector without neglecting environmentally sound management principles.     

Extractable atrazine and its metabolites in agricultural soils from the temperate humid zone

Extractable atrazine and its metabolites (hydroxyatrazine, deethylatrazine and deisopropylatrazine) were evaluated in agricultural soils from the temperate humid zone (Galicia, NW Spain) under laboratory conditions. The experiment was performed with five soils with different properties (organic C, soil texture and atrazine application history), both unamended and treated with atrazine at field application rate. Measurements of the atrazine compounds were made at different time intervals (1, 3, 6, 9 and 12 weeks) during a 3-month incubation period. Results showed that only hydroxyatrazine was detected in the extractable fraction of the unamended soils, with values remaining relatively constant throughout the incubation period. Atrazine addition notably increased the concentration of the parent compound and its degradation products; deisopropylatrazine and hydroxyatrazine were the main metabolites detected in the extractable fraction of the treated soils, whereas deethylatrazine was not detected. After 7 days incubation, values of total extractable residues, expressed as percentage of initially added atrazine, ranged from 75 to 86% (25–68% of atrazine, 7–11% of hydroxyatrazine and 9–57% of deisopropylatrazine). The values decreased rapidly during the first 3 weeks of incubation, showing values of 2–8% in soils with higher atrazine application and from 28 to 30% in soils with lower application history. At the end of the incubation, 2–8% of total extractable residues were still detected (0–4% of atrazine, 2–3% of hydroxyatrazine and 0–2% of deisopropylatrazine), indicating a residual effect of atrazine addition. These variations in the extractable fraction indicated that most added atrazine was rapidly degraded, especially in soils with higher application history.     

Territory characteristics and coexistence with heterospecifics in the Dartford warbler <Emphasis Type="Italic">Sylvia undata</Emphasis> across a habitat gradient

The study of successional gradients may help to understand the relative influence of habitat structure and competition on territory characteristics. Here, we evaluate the effects of vegetation cover, conspecific and heterospecific densities, and distance to the nearest neighbor on territory size, shape, and overlap in insectivorous birds. We studied these effects along a gradient of postfire habitat regeneration in which foliage cover and densities of focal species varied several-fold. We delineate 197 territories (minimum convex polygons) of the shrub-dwelling Dartford warbler (Sylvia undata) and 255 of the syntopic Sardinian (Sylvia melanocephala), subalpine (Sylvia cantillans) and melodious (Hippolais polyglotta) warblers at three plots in NE Catalonia (Spain and France) in 1987–2005. After accounting for the effect of the number of locations used to delineate polygons, generalized linear mixed models (GLMM) showed a reduction in territory area of the Dartford warbler as conspecific density increased and distance to nearest neighbor decreased, in accordance with the contender pressure hypothesis for territory size regulation. Heterospecific density was not included in the final model of territory size and the effect of habitat structure was marginal. Territory roundness was positively correlated with its size and with conspecific density, probably in relation to energetic constraints, and negatively with heterospecific density. Territorial exclusion was almost complete among Dartford warblers, whereas interspecific territory overlap was extensive and tended to increase with heterospecific density and with structural diversity along the gradient. Our results support the hypothesis that Mediterranean warbler coexistence derives from ecological segregation and not from interspecific territoriality.