Mass balance to assess the efficiency of a mechanical-biological treatment

Using mechanical-biological treatment of residual municipal solid waste, it is possible to significantly lower landfill volume and gas and leachate emissions. Moreover, the landfill characteristics are improved. The performance of the Mende (France) mechanical-biological treatment plant is assessed via mass balances coupled with manual sorting according to the MODECOMtrade mark methodology and biochemical methane potential after 90 days of incubation. The site includes mechanical sorting operations, a rotary sequential bioreactor, controlled aerobic stabilisation corridors, maturation platforms, and a sanitary landfill site for waste disposal in separated cells. Results showed that several steps could be improved: after a first sieving step, about 12% of the potentially biodegradable matter is landfilled directly without any treatment; mechanical disintegration of papers and cardboards in the rotary sequential bioreactor is insufficient and leads to a high proportion of papers and cardboards being landfilled without further treatment. Two fine fractions go through stabilisation and maturation steps. At the end of the maturation step, about 54% of the potentially biodegradable matter is degraded. The biochemical methane potential after 90 days of incubation is reduced by 81% for one of the two fine fractions and reduced by 88% for the other one. Considering the whole plant, there is a reduction of nearly 20% DM of the entering residual municipal solid waste.     

Developing and Implementing Multiple-Use Forest Management Planning in Turkey

This paper explains briefly the conceptual framework of an ecosystem-based multiple-use forest management planning focusing on biodiversity conservation and participation. Some results from a case study were documented to realize the implementation of the concept. A strong liaison between the related institutions and major stakeholders and the effective use of Geographic Information System (GIS) and Remote Sensing (RS) are necessary. Effective participation is evident only with the involvement of enthusiastic and skillful stakeholders. A case study of ??neada, Turkey, supported the idea that participation as communication has better possibilities to promote multiple-use forest management than participation as information gathering. Primary challenges relate to the effectiveness of conservation program, availability of coherent biodiversity data, capacity building; awareness, training, and common understanding of biodiversity and protected area concept; coordination among the related institutions and stakeholders; and willingness and enthusiasm of authorities to accept and implement the concept.     

Vegetation as an Indicator of Soil Properties and Water Quality in the Akarçay Stream (Turkey)

In this study, the relationship among water quality, soil properties, and plant coverage in the region of the Akarçay stream was examined. Correlation analyses were carried out between soil samples taken from each of four plant communities in the Akarçay basin and water in the Akarçay stream. The four plant communities in the study area are as follows: Limonium lilacinum (Boiss. et Bal.) Wag., Alhagi pseudalhagi (M. Bieb.) Desv. Peganum harmala L., and Hordeum marinum Huds. subsp. marinum. B, Cl, EC, K, Mg, Na, pH, and SO₄ data from both soil and water samples were subjected to statistical analysis, and significant correlations were obtained (p < 0.05). These correlations indicated that the chemical features of the soil had a major effect on water quality. The important parameters were B, Cl, EC, K, Mg, Na, pH, and SO₄ for Limonium lilacinum communities; Ca, K, and pV for Peganum harmala; and B, Cl, Mg, pH, and pV for Alhagi pseudalhagi. There were also statistically significant relationships (p < 0.05) among the parameters examined. These findings strongly suggested that these plant communities can be used as indicators for soil chemistry and water quality.     

Characterisation of sugar cane straw waste as pozzolanic material for construction: calcining temperature and kinetic parameters

This paper reports on the influence of calcining temperature (800 and 1000 degrees C) on the pozzolanic activation of sugar cane straw (SCS). The reaction kinetics of SCS ash-lime mixtures were inferred from physicochemical characteristics (X-ray diffraction patterns and thermogravimetry analysis. The fitting of a kinetic-diffusive model to the experimental data (fixed lime versus time) allowed the computing of the kinetic parameters (reaction rate constant) of the pozzolanic reaction. Results obtained confirm that the sugar cane straw ash (SCSA) calcined at 800 and 1000 degrees C have properties indicative of very high pozzolanic activity. No influence of calcining temperature on the pozzolanic activity was observed. Also, no crystalline compounds during the pozzolanic reaction were identified up to 90 days of reaction. Environmental durability and strength of the consequential mortars remain to be assessed.     

Influence of the recycled material percentage on the rheological behaviour of HDPE for injection moulding process

The amount of polymer material wasted during thermoplastic injection moulding is very high. It comes from both the feed system of the part, and parts necessary to set up the mould, as well as the scrap generated along the process due to quality problems. The residues are managed through polymer recycling that allows reuse of the materials in the manufacturing injection process. Recycling mills convert the parts into small pieces that are used as feed material for injection, by mixing the recycled feedstock in different percentages with raw material. This mixture of both raw and recycled material modifies material properties according to the percentage of recycled material introduced. Some of the properties affected by this modification are those related to rheologic behaviour, which strongly conditions the future injection moulding process. This paper analyzes the rheologic behaviour of material with different percentages of recycled material by means of a capillary rheometer, and evaluates the influence of the corresponding viscosity curves obtained on the injection moulding process, where small variations of parameters related to rheological behaviour, such as pressure or clamping force, can be critical to the viability and cost of the parts manufactured by injection moulding.     

Biochemical responses of the marine mussel Mytilus galloprovincialis to petrochemical environmental contamination along the North-western coast of Portugal

Following the development of urban and industrial centres petrochemical products have become a widespread class of contaminants. The aim of this study was to investigate the effects of petrochemical contamination in wild populations of mussels (Mytilus galloprovincialis) along the NW Atlantic coast of Portugal by applying antioxidant and energetic metabolism parameters as biomarkers. For that, mussels were collected at five sampling sites presenting different petrochemical contamination levels. To evaluate the mussels' antioxidant status, enzymatic activities of catalase, superoxide dismutase, glutathione peroxidase, glutathione reductase, glutathione S-transferases, as well as glutathione redox status were evaluated in gills and digestive glands of mussels collected from the selected sites. Lipid peroxidation was determined in the same tissues to quantify cellular oxidative damage. Furthermore, to investigate how energetic processes may respond to these contaminants, the activity of NADP(+)-dependent isocitrate dehydrogenase was determined in mussels' digestive glands, and octopine dehydrogenase was determined in mussels' posterior adductor muscle. Furthermore, the concentrations of aliphatic hydrocarbons, unresolved complex mixture and polycyclic aromatic hydrocarbons (PAHs) were quantified in mussels' tissue, and abiotic parameters were quantified in water samples collected at each site. Several biomarkers showed statistically significant differences among sampling sites. The redundancy analysis (RDA) used to perform the integrated analysis of the data showed a clear separation of the sampling sites in three different assemblages, which are in agreement with the PAHs levels found in mussels tissues. In addition, the RDA indicated that some of the selected biomarkers may be influenced by abiotic parameters (e.g. salinity, pH, nitrates and ammonia). The approach selected for this study seems to be suitable for monitoring petrochemical contamination.     

Arsenic speciation of atmospheric particulate matter (PM10) in an industrialised urban site in southwestern Spain

An arsenic speciation study has been performed in PM10 samples collected on a fortnight basis in the city of Huelva (SW Spain) during 2001 and 2002. The arsenic species were extracted from the PM10 filters using a NH2OH x HCl solution and sonication, and determined by HPLC-HG-AFS. The mean bulk As concentration of the samples analyzed during 2001 and 2002 slightly exceed the mean annual 6 ng m(-3) target value proposed by the European Commission for 2013, arsenate [As(V)] being responsible for the high level of arsenic. The speciation analyses showed that As(V) was the main arsenic species found, followed by arsenite [As(III)] (mean 6.5 and 7.8 ng m(-3) for As(V), mean 1.2 and 2.1 ng m(-3) for As(III), in 2001 and 2002, respectively). The high levels of arsenic species found in PM10 in Huelva have a predominant industrial origin, such as the one from a nearby copper smelter, and do not present a seasonal pattern. The highest daily levels of arsenic species correspond to synoptic conditions in which the winds with S and SW components transport the contaminants from the main emission source. The frequent African dust outbreaks over Huelva may result in an increment of mass levels of PM10, but do not represent a significant input of arsenic in comparison to the anthropogenic source. The rural background levels of arsenic around Huelva are rather high, in comparison to other rural or urban areas in Spain, showing a relatively high atmosphere residence time of arsenic. This work shows the importance of arsenic speciation in studies of aerosol chemistry, due to the presence of arsenic species [As(III) and As(V)] with distinct toxicity.     

Relations between PM10 composition and cell toxicity: a multivariate and graphical approach

Previous studies have used particle mass and size as metrics to link airborne particles with deleterious health effects. Recent evidence suggests that particle composition can play an important role in PM-toxicity; however, little is known about the specific participation of components (individually or acting in groups) present in such a complex mixture that accounts for toxicity. This work explores relationships among PM(10) components in order to identify their covariant structure and how they vary in three sites in Mexico City. Relationships between PM(10) with cell toxicity and geographical location were also explored. PM(10) was analyzed for elemental composition, organic and elemental carbon, endotoxins and the induction of inhibition of cell proliferation, IL-6, TNFalpha and p53. PM(10) variables were evaluated with principal component analysis and one-way ANOVA. The inhibition of cell proliferation, IL-6 and TNFalpha were evaluated with factorial ANOVA and p53 with the Welch test. The results indicate that there is heterogeneity in particle mass, composition and toxicity in samples collected at different sites. Multivariate analysis identified three major groups: (1) S/K/Ca/Ti/Mn/Fe/Zn/Pb; (2) Cl/Cr/Ni/Cu; and (3) endotoxins, organic and elemental carbon. Groups 1 and 3 showed significant differences among sites. Factorial ANOVA modeling indicated that cell proliferation was affected by PM concentration; TNFalpha and IL-6 by the interaction of concentration and site, and p53 was different by site. Radial plots suggest the existence of complex interactions between components, resulting in characteristic patterns of toxicity by site. We conclude that interactions of PM(10) components determine specific cellular outcomes.     

Ground laser remote sensing measurements of a Saharan dust outbreak in Central Spain. Influence on PM10 concentrations in the lower and upper Spanish plateaus

This paper presents the hourly evolution of a severe Saharan dust outbreak, (SDO), affecting Central Spain over July 23-24, 2004 measured with a laser remote sensing device at a location close to the Guadarrama mountain range foothills and its impact on PM10 levels (particles with an aerodynamic diameter below 10 microm) recorded at four contrasting monitoring stations located in the upper and lower Spanish plateau, some 170km apart. During the period of study the Saharan dust layer, (SDL), presented significant hourly variability in height (3600-1500m), depth (1500-700m) and aerosol dust loading (extinction coefficient, EC, 0.22-1.28km(-1)). Overnight layering was generally observed whereas a well mixed layer prevailed in the afternoon. The (SDO) impact on the lower levels took place approximately 12h after the (SDL) was initially observed and triggered by a descending dust enriched, evidencing the important role of subsidence over the presence of dust in lower altitudes. During the event, PM10 levels at all the stations exceeded EU air quality daily mean standards, 50 microgm(-3), on 2-4days. The maximum values ranged from 185 to 245 microgm(-3) depending on the monitoring station. The impact on PM10 spread from 2days in the upper plateau to 3-4 in the lower plateau, in agreement with the geographical location of the monitoring stations with respect to the southwest origin of the intrusion. The impact was even more dramatic on PM10 hourly concentrations, leading to maximum hourly peaks ranging from 322 to 598 microgm(-3) again depending on the monitoring station. Correlations between EC vertical profiles and PM10 hourly concentrations at the monitoring stations showed the great influence of the (SDO) on surface concentrations. The best linear fits corresponded to the extinction coefficients in the lower altitudes (close to the lower range of the device 500-650m), EC2, yielding satisfactory correlation coefficients ranging from 0.68 to 0.71. The low variability of the slope of each individual linear fit, 19.2%, shows the similar impact of (SDO) on the PM10 hourly concentrations recorded in the area under study.