Radionuclides in marine mammals off the Portuguese coast

Radionuclide analyses were performed in tissue samples including muscle, gonad, liver, mammary gland, and bone of marine mammals stranded on the Portuguese west coast during January-July 2006. Tissues were collected from seven dolphins (Delphinus delphis and Stenella coeruleoalba) and one pilot whale (Globicephala sp.). Samples were analyzed for ²¹⁰Po and ²¹⁰Pb by alpha spectrometry and for ¹³⁷Cs and ⁴⁰K by gamma spectrometry. Po-210 concentrations in common dolphin’s muscle (D. delphis) averaged 56 ± 32 Bq kg⁻¹ wet weight (w.w.), while ²¹⁰Pb averaged 0.17 ± 0.07 Bq kg⁻¹ w.w., ¹³⁷Cs averaged 0.29 ± 0.28 Bq kg⁻¹ w.w., and ⁴⁰K 129 ± 48 Bq kg⁻¹ w.w. Absorbed radiation doses due to these radionuclides for the internal organs of common dolphins were computed and attained a 1.50 μGy h⁻¹ on a whole body basis. ²¹⁰Po was the main contributor to the weighted absorbed dose, accounting for 97% of the dose from internally accumulated radionuclides. These computed radiation doses in dolphins are compared to radiation doses from ²¹⁰Po and other radionuclides reported for human tissues. Due to the high ²¹⁰Po activity concentration in dolphins, the internal radiation dose in these marine mammals is about three orders of magnitude higher than in man.     

Spectroscopic changes on fulvic acids from a kraft pulp mill effluent caused by sun irradiation

Large volumes of wastewater with a high organic load are generated by the pulp and paper industry that negatively affect the quality of receiving waters. The main waste products in the pulp mill effluents are lignin derived macromolecular compounds, which are similar to natural humic substances and very resistant to wastewater treatments. Fulvic acids (FA) represent the higher percentage of these humic substances and it was observed that solar irradiation modify their properties. Several analytic tools, namely, UV–Visible, molecular fluorescence and FTIR spectroscopies, were used to assess the effect of solar exposition on fulvic acids from a kraft pulp mill effluent. It may be concluded that sun irradiation may alter to a high extent the physicochemical properties of macromolecular organic matter, namely fulvic acids, released by kraft pulp mill effluents. After solar exposition, the aromaticity decreases, the aliphatic structures become more oxygenated, and the fulvic acids from the pulp mill effluent remaining in solution are more similar to aquatic fulvic acids from non polluted sites.     

Determination of Hg and diet identification in otter (Lontra longicaudis) feces

An analytical procedure for the determination of Hg in otter (Lontra longicaudis) feces was developed, to separate fish scales for the identification of the animal diet. Samples were washed with ultra-pure water and the suspension was sampled and transferred for digestion. The solubilization was performed with nitric-perchloric acid mixture, and detection carried out by the atomic fluorescence spectrometry (AFS). The quality of the analytical procedure was assessed by analyzing in-house standard solutions and certified reference materials. Total Hg concentrations were in the range of 7.6-156 ng g(-1) (July 2004), 25.6-277 ng g(-1) (January 2005) and 14.6-744 ng g(-1) (May 2005) that is approximately the same order of magnitude for all samples collected in two reservoirs at the Tiete River, Brazil. Although Hg concentrations varied with sampling periods and diet, high levels were correlated to the percentage of carnivorous fish scales present in the otter feces.     

Macroalgae mitigation potential for fish aquaculture effluents: an approach coupling nitrogen uptake and metabolic pathways using Ulva rigida and Enteromorpha clathrata

Aquaculture effluents are rich in nitrogen compounds that may enhance local primary productivity, leading to the development of algae blooms. The goal of this study was to assess the potential use of naturally occurring green macroalgae (Ulva and Enteromorpha) as bioremediators for nitrogen-rich effluents from a fish aquaculture plant, by evaluating their respective uptake dynamics under controlled conditions. Ulva and Enteromorpha were incubated separately in aquaculture effluent from a local pilot station. Algae tissue and water samples were collected periodically along 4 h. For each sample, nitrate, nitrite, and ammonia concentrations were quantified in the effluent, while internal algae reserve pools and nitrate reductase activity (NRA) were determined within the algae tissues. Both macroalgae absorbed all dissolved inorganic nitrogen compounds in less than 1 h, favoring ammonia over nitrate. Ulva stored nitrate temporarily as an internal reserve and only used it after ammonia availability decreased, whereas Enteromorpha stored and metabolized ammonia and nitrate simultaneously. These distinct dynamics of ammonia and nitrate uptake supported an increase in NRA during the experiment. This study supports the hypothesis that Ulva or Enteromorpha can be used as bioremediators in aquaculture effluents to mitigate excess of dissolved inorganic nitrogen.     

Helmet retention system types as a risk factor to properly attach the chin strap

Objectives: This study aimed to determine the factors associated with the incorrect use of a helmet retention system (loose or open) and how often this happens.

Methods: This was an observational transversal study conducted in Curitiba, Brazil. Trained observers positioned at traffic lights collected information about the helmet fixation mode, the helmet model (full-face, open-face, modular, half), and the helmet retention system model (micrometric, double-D, fast-release). Additional data including position on the motorcycle, gender, and function of the motorcycle (as a work vehicle) were collected. The observers, collection site, and periods were randomly selected by lots.

Results: From a total of 3,050 motorcyclists, 1,807 (59.2%) had their helmets fastened correctly, 907 (29.7%) had the retention system fastened loosely, and in 336 (11.0%), the retention system was completely open. Increased odds of incorrect use were observed for the fast-release and double-D buckles compared to the micrometrics buckles, with a fixed odds ratio (OR) of 4.62 (95% confidence interval [CI], 3.89–5.51) and 3.54 (95% CI, 2.46–5.09), respectively (P <.0001). Full-face helmets had a higher chance of incorrect use (P <.0001), and passengers had a higher incidence of incorrect use of the helmet than drivers (P <.0001).

Conclusion: An important risk factor related to the incorrect use of the helmet was the type of retention system. The helmet model and being a passenger had a secondary influence on incorrect use of helmets.     

Isolation and characteristics of sulfentrazone-degrading bacteria

This study aimed to isolate and characterize bacteria able to use sulfentrazone in the commercial formulation as their sole carbon source. The isolation of the potential sulfentrazone-degrading bacteria was made from soil samples with a recent history of herbicide application and from isolates identified through rDNA sequencing. Subsequently, we assessed the growth of the isolates and their sulfentrazone degradation ability using high-performance liquid chromatography. Twenty-six potential sulfentrazone-degrading bacterial isolates were obtained in pure culture. Through analysis of the rDNA sequences, the predominance of bacterial species of the genus Pseudomonas was found. The isolates presented a differentiated ability of sulfentrazone degradation. The presence of herbicide in the culture medium reduced the log phase of four isolates. Pseudomonas putida, Pseudomonas lutea, Pseudomonas plecoglossicida and three isolates of Pseudomonas sp. showed higher sulfentrazone degradation capacity, which varied from 4 to 15%. This is the first report of the Pseudomonas genre capable of sulfentrazone degradation. The isolates obtained present potential use in bioremediation programs for soil contaminated with sulfentrazone.     

Count, identification and antimicrobial susceptibility of bacteria recovered from dental solid waste in Brazil

In Brazil, few studies on microbial content of dental solid waste and its antibiotic susceptibility are available. An effort has been made through this study to evaluate the hazardous status of dental solid waste, keeping in mind its possible role in cross-infection chain. Six samples of solid waste were collected at different times and seasons from three dental health services. The microbial content was evaluated in different culture media and atmospheric conditions, and the isolates were submitted to antibiotic susceptibility testing. A total of 766 bacterial strains were isolated and identified during the study period. Gram-positive cocci were the most frequent morphotype isolated (48.0%), followed by Gram-negative rods (46.2%), Gram-positive rods (5.0%), Gram-negative-cocci (0.4%), and Gram-positive coccobacillus (0.1%). Only two anaerobic bacteria were isolated (0.3%). The most frequently isolated species was Staphylococcus epidermidis (29.9%), followed by Stenotrophomonas maltophilia (8.2%), and Enterococcus faecalis (6.7%). High resistance rate to ampicillin was observed among Gram-negative rods (59.4%) and Gram-positive cocci (44.4%). For Gram-negative rods, high resistance was also noted to aztreonam (47.7%), cefotaxime (47.4%), ceftriaxone and cefazolin (43.7%), and ticarcillin-clavulanic acid (38.2%). Against Gram-positive cocci penicillin exhibit a higher resistance rate (45.0%), followed by ampicillin, erythromycin (27.2%), and tetracycline (22.0%). The present study demonstrated that several pathogenic bacteria are present in dental solid waste and can survive after 48 h from the waste generation time and harbor resistance profiles against several clinical recommended antibiotics.     

Biodegradable Films Based on Blends of Gelatin and Poly (Vinyl Alcohol): Effect of PVA Type or Concentration on Some Physical Properties of Films

The aim of this work was to develop biodegradable films based on blends of gelatin and poly (vinyl alcohol) (PVA), without a plasticizer. Firstly, the effect of five types of PVA with different degree of hydrolysis (DH) on the physical properties of films elaborated with blends containing 23.1% PVA was studied. One PVA type was then chosen for the study of the effect of the PVA concentration on the mechanical properties, color, opacity, gloss, and water solubility of the films. The five types of PVA studied allowed for films with different characteristics, but with no direct relationship with the DH of the PVA. Therefore, the PVA Celvol^®418 with a DH = 91.8% was chosen for the second part, because they produced films with greater tensile strength. The PVA concentration affected all studied properties of films. These results could be explained by the results of the DSC and FTIR analyses, which showed that some interactions between the gelatin and the PVA occurred depending on the PVA concentration, affecting the crystallinity of the films.     

Soda-Treated Sisal/Polypropylene Composites

Treated sisal fibers were used as reinforcement of polypropylene (PP) composites, with maleic anhydride-grafted PP (MAPP) as coupling agent. The composites were made by melting processing of PP with the fiber in a heated roller followed by multiple extrusions in a single-screw extruder. Injection molded specimens were produced for the characterization of the material. In order to improve the adhesion between fiber and matrix and to eliminate odorous substances, sisal fibers were treated with boiling water and with NaOH solutions at 3 and 10 wt.%. The mechanical properties of the composites were assessed by tensile, bend and impact tests. Additionally, the morphology of the composites and the adhesion at he fiber–matrix interface were analyzed by SEM. The fiber treatment led to very light and odorless materials, with yields of 95, 74 and 62 wt.% for treatments with hot water, 3 and 10 wt.% soda solution respectively. Fiber treatment caused an appreciable change in fiber characteristics, yet the mechanical properties under tensile and flexural tests were not influenced by that treatment. Only the impact strength increased in the composites with alkali-treated sisal fibers.     

Determination of copper in biological samples by flame atomic absorption spectrometry after precipitation with Me-BTAP

A simple and sensitive method was developed for determination of trace copper by direct precipitation preconcentration and detection with Flame Atomic Absorption Spectrometry (FAAS). The reagent 2-[2'-(6-methyl-benzothiazolylazo)]-4-aminophenol (Me-BTAP) was used as precipitating agent. The experimental conditions for the quantitative precipitation of copper, such as pH, amount of reagents, temperature and the effect of diverse ions on the precipitation have been investigated. It was found that copper is quantitatively extracted (> or =95%) and the method provides a sensitivity enhancement of 40-fold for a 10 ml sample volume with a detection limit of 0.5 microg l(-1). The proposed method was successfully applied for the determination of trace copper in water, urine and biological samples.