The environmental behaviour of polychlorinated phenols and its relevance to cork forest ecosystems: a review

Pentachlorophenol (PCP) has been used as a herbicide, biocide and preservative worldwide since the 1930s and as a result, extensive and prolonged contamination exists. The environmental impact increases when its many degradation products are taken into consideration. A number of chloroanisols and their related chlorophenols have been found in cork slabs collected from Portuguese oak tree forests before stopper manufacturing, and contamination by PCP and polychlorinated anisole (PCA) has been detected in Canadian forests. It is suggested that the use of polychlorinated phenols, in particular PCP, is thought to be a cause of the cork taint problem in wine, a major socio-economic impact not only for industry but on sensitive and highly biodiverse ecosystems. It also highlights particular issues relating to the regional regulation of potentially toxic chemicals and global economics world wide. To fully understand the impact of contamination sources, the mechanisms responsible for the fate and transport of PCP and its degradation products and assessment of their environmental behaviour is required. This review looks at the current state of knowledge of soil sorption, fate and bioavailability and identifies the challenges of degradation product identification and the contradictory evidence from field and laboratory observations. The need for a systematic evaluation of PCP contamination in relation to cork forest ecosystems and transfer of PCP between trophic levels is emphasised by discrepancies in bioaccumulation and toxicity. This is essential to enable long term management of not only transboundary contaminants, but also the sustainable management of socially and economically important forest ecosystems.     

Bias Correction Techniques to Improve Air Quality Ensemble Predictions: Focus on O3 and PM Over Portugal

Five air quality models were applied over Portugal for July 2006 and used as ensemble members. Each model was used, with its original set up in terms of meteorology, parameterizations, boundary conditions and chemical mechanisms, but with the same emission data. The validation of the individual models and the ensemble of ozone (O₃) and particulate matter (PM) is performed using monitoring data from 22 background sites. The ensemble approach, based on the mean and median of the five models, did not improve significantly the skill scores due to large deviations in each ensemble member. Different bias correction techniques, including a subtraction of the mean bias and a multiplicative ratio adjustment, were implemented and analysed. The obtained datasets were compared against the individual modelled outputs using the bias, the root mean square error (RMSE) and the correlation coefficient. The applied bias correction techniques also improved the skill of the individual models and work equally well over the entire range of observed O₃ and PM values. The obtained results revealed that the best bias correction technique was the ratio adjustment with a 4-day training period, demonstrating significant improvements for both analysed pollutants. The increase in the ensemble skill found comprehends a bias reduction of 88 % for O₃, and 92 % for PM10, and also a decrease in 23 % for O₃ and 43 % for PM10 in what concerns the RMSE. In addition, a spatial bias correction approach was also examined with successful skills comparing to the uncorrected ensemble for both pollutants.     

Application of radiometric analysis in the study of provenance and transport processes of Brazilian coastal sediments

Natural gamma radiation of beach sand deposits was measured along the south coast of Rio de Janeiro State, Brazil, with the aim of studying the provenance and transport processes of sediments in this area. Concentrations of thorium, uranium and potassium were evaluated using γ-ray spectrometry and a behavioral study of eTh/eU and eTh/K cross plots was performed, reflecting the mineralogical properties of beach sands, as well as their history of transport and sorting processes. The results show that such technique can be efficiently used to map heavy mineral distributions and to distinguish the different origins of coastal sediments disclosing the influence of nearby rivers.     

A novel holistic framework for genetic‐based captive‐breeding and reintroduction programs

Research in reintroduction biology has provided a greater understanding of the often limited success of species reintroductions and highlighted the need for scientifically rigorous approaches in reintroduction programs. We examined the recent genetic‐based captive‐breeding and reintroduction literature to showcase the underuse of the genetic data gathered. We devised a framework that takes full advantage of the genetic data through assessment of the genetic makeup of populations before (past component of the framework), during (present component), and after (future component) captive‐breeding and reintroduction events to understand their conservation potential and maximize their success. We empirically applied our framework to two small fishes: Yarra pygmy perch (Nannoperca obscura) and southern pygmy perch (Nannoperca australis). Each of these species has a locally adapted and geographically isolated lineage that is endemic to the highly threatened lower Murray–Darling Basin in Australia. These two populations were rescued during Australia's recent decade‐long Millennium Drought, when their persistence became entirely dependent on captive‐breeding and subsequent reintroduction efforts. Using historical demographic analyses, we found differences and similarities between the species in the genetic impacts of past natural and anthropogenic events that occurred in situ, such as European settlement (past component). Subsequently, successful maintenance of genetic diversity in captivity—despite skewed brooder contribution to offspring—was achieved through carefully managed genetic‐based breeding (present component). Finally, genetic monitoring revealed the survival and recruitment of released captive‐bred offspring in the wild (future component). Our holistic framework often requires no additional data collection to that typically gathered in genetic‐based breeding programs, is applicable to a wide range of species, advances the genetic considerations of reintroduction programs, and is expected to improve with the use of next‐generation sequencing technology.     

Americium adsorption on the surface of macrophytic algae

Data are presented on the rates at which americium (Am) deposits upon blade surfaces of three benthic algal species (Ulva rigida, Fucus vesiculosus and Gigartina stellata) following short-term exposures (1–6 h). Am is taken up in direct proportion to the ambient radionuclide concentration in sea water. Uptake by the green alga was 3 to 5 times greater than that for the brown and red species. Experimental evidence indicated that Am accumulation is a passive process and that adsorption takes place mainly on the thin outer organic coating of the seaweed. The Am transport coefficients (0·9–4·1 × 10?⁵ Bq cm?² s?¹ per Bq ml?¹ sea water) are quite similar to that previously found for the naturally occurring α-emitter ²¹⁰Po, but are an order of magnitude lower than a plutonium transport coefficient reported in the literature. Release of labelled extracellular products associated with the algal surface coating is considered to be responsible for the rapid loss of Am observed previously in macroalgae and may in fact serve as a mechanism for transferring Am to filter feeding zooplankton.     

Biokinetics of plutonium,americium and californium in the marine isopod Cirolana borealis,with observations on its feeding and molting behavior

In a series of laboratory experiments carried out during 1982, the biokinetics of ²³⁷Pu (IV), ²³⁷Pu (V), ²⁴¹Am (III), and ²⁵²Cf (III) were studied in the benthic marine isopod Cirolana borealis Lilljeb. Following a 3 wk exposure to labelled seawater, isopods reached non-equilibrium concentration factors of 52±15, 54±12, 176±14, and 185±53 for Pu (IV), Pu (V), Am and Cf, respectively. Uptake of these radionuclides occurred to a great extent by surface adsorption, with the major fraction of the accumulated radionuclides being associated with exoskeleton and lesser percentages located in gut, digestive gland, muscle and haemolymph. The pattern of radiotracer depuration was in all cases biphasic, with the long-lived retention compartment retaining the largest fraction of whole-body radioactivity. Biological half-lives for radionuclide turnover in the long-lived compartment were 60±3 d, 87±5 d, 261±12 d and 288±60 d for Pu (IV), Pu (V), Am and Cf, respectively. Examination of radionuclide distribution among tissues following longterm depuration showed that the radionuclides were eliminated from internal tissues more rapidly than from the exoskeleton. Uptake and depuration studies indicated that the biokinetics of americium and californium were similar to each other, but that they differed significantly from those of oxidized and reduced plutonium. In general, these experimental results support previous reports that americium and californium are more bioavailable than plutonium in the marine waters. The fraction americium and californium assimilated into tissue from food was very low and did not exceed 5%. Unassimilated labelled food was often retained in the gut for more than 2 mo and released only infrequently in a loosely bound condition. In the event of contamination, this particular feeding-digestion strategy in highly mobile, scavenging isopods could act as a potential biological mechanism for the widespread dispersion of radioactive wastes.     

Dioxins and furans in the atmosphere of São Paulo City, Brazil

Air samples were collected simultaneously at three urban sites in São Paulo City, Brazil, in winter, spring, summer and fall (in 2000 and 2001). Andersen PUF samplers were used for gas and particles sequential sampling. Samples were analyzed using HRGC/HRMS according to US EPA Method 8290. The greater metropolitan area of São Paulo is the largest industrialized region of Latin America and has a highly polluted atmosphere. Concentrations of dioxins and furans, which are well-known toxic chemicals, ranged from 1.14 pg m⁻³ to 13.8 pg m⁻³ (0.047 pg I-TEQ m⁻³ to 0.751 pg I-TEQ m⁻³). Principal component analysis showed that all the variables are highly correlated with one another except the 2,3,7,8-TCDD one. This is consistent with the similar concentration profiles observed for the tetra, penta, hexa, hepta and octa-homologous groups of the three sampling sites studied. At all sites, the most abundant compounds were the hepta and octa congeners. The 2,3,4,7,8-PeCDF accounted for 37–46% of the total toxicity and the 2,3,7,8-TCDD accounted for 7–16%. Highest mass concentrations of PCDD/Fs were found in the site where there is influence of industrial activities and heavy vehicular traffic fueled by gasohol, diesel, and ethanol.     

Does invasion by Pteridium aquilinum (Dennstaedtiaceae) affect the ecological succession in Atlantic Forest areas after a fire?

Environmental Science and Pollution Research - Pteridium aquilinum (Dennstaedtiaceae) colonization affects ecological and restoration processes. The knowledge of the impacts on the ecological...     

Biogas from poultry waste—production and energy potential

The objective of this study was to evaluate the effect of heat treatment on poultry litter with different levels of reutilisation for potential generation of biogas in experimental biodigesters. Chicken litter used was obtained from two small-scale poultry houses where 14 birds m^?2 were housed for a period of 42 days per cycle. Litter from aviary 1 received no heat treatment while each batch of litter produced from aviary 2 underwent a fermentation process. For each batch taken, two biodigesters were set for each aviary, with hydraulic retention time of 35 days. The efficiency of the biodigestion process was evaluated by biogas production in relation to total solids (TS) added, as well as the potential for power generation. Quantified volumes ranged from 8.9 to 41.1 L of biogas for aviary 1, and 6.7 to 33.9 L of biogas for aviary 2, with the sixth bed reused from both aviaries registering the largest biogas potential. Average potential biogas in m³ kg^?1 of TS added were 0.022 to 0.034 for aviary 1 and 0.015 to 0.022 for aviary 2. Energy values ??of biogas produced were calculated based on calorific value and ranged from 0.06 to 0.33 kWh for chicken litter without fermentation and from 0.05 to 0.27 kWh for chicken litter with fermentation. It was concluded that the re-use of poultry litter resulted in an increase in biogas production, and the use of fermentation in the microbiological treatment of poultry litter seems to have negatively influenced production of biogas.     

Combining Flow Cytometry and Real-Time PCR Methodology to Demonstrate Consumption by Prymnesium parvum1

Bowers, Holly A., Andreas Brutemark, Wanderson F. Carvalho, and Edna Granéli, 2010. Combining Flow Cytometry and Real-Time PCR Methodology to Demonstrate Consumption by Prymnesium parvum. Journal of the American Water Resources Association (JAWRA) 46(1):133-143. DOI: 10.1111/j.1752-1688.2009.00397.x Abstract: Harmful algal bloom species can persist in the environment, impacting aquatic life and human health. One of the mechanisms by which some harmful algal bloom species are able to persist is by consumption of organic particles. Methods to demonstrate and measure consumption can yield insight into how populations thrive. Here, we combine flow cytometry and real-time PCR to demonstrate consumption of a cryptophyte species (Rhodomonas sp.) by a toxic mixotrophic haptophyte (Prymnesium parvum). Using flow cytometry, the feeding frequency of a population of P. parvum cells was calculated using the phycoerythrin (PE) fluorescence signal from Rhodomonas sp. and the fluorescence of an acidotropic probe labeling the food vacuoles. Feeding frequency increased in the beginning of the experiment and then began to decline, reaching a maximum of 47.5% of the whole P. parvum population after 212 min. The maximum number of consumed Rhodomonas sp. cells was 0.8 per P. parvum cell, and occurred after 114 min corresponding to an ingestion rate of 0.4 Rhodomonas sp. cells/P. parvum/h. Cells from the feeding P. parvum population were sorted, washed, and subjected to a real-time PCR assay targeting the cryptophyte 18S locus. There was a correlation between cycle threshold (Ct) values and number of consumed prey cells calculated by fluorescence. Overall, this study shows that flow cytometric analysis, of the acidotropic probe and prey pigments, is an efficient and rapid tool in enumerating food vacuoles and the number of prey cells consumed. Furthermore, we suggest that real-time PCR can be applied to cells sorted by flow cytometry, thus allowing for the detection and potential quantification of the targeted prey cells.