Amplifying the benefits of agroecology by using the right cultivars

Tropical soils are particularly vulnerable to fertility losses due to their low capacity to retain organic matter and mineral nutrients. This urges the development of new agricultural practices to manage mineral nutrients and organic matter in a more sustainable way while relying less on fertilizer inputs. Two methods pertaining to ecological engineering and agroecology have been tested with some success: (1) the addition of biochar to the soil, and (2) the maintenance of higher earthworm densities. However, modern crop varieties have been selected to be adapted to agricultural practices and to the soil conditions they lead to and common cultivars might not be adapted to new practices. Using rice as a model plant, we compared the responsiveness to biochar and earthworms of five rice cultivars with contrasted selection histories. These cultivars had contrasted responsivenesses to earthworms, biochar, and the combination of both. The mean relative increase in grain biomass, among all treatments and cultivars, was 94% and 32%, respectively, with and without fertilization. Choosing the best combination of cultivar and treatment led to a more than fourfold increase in this mean benefit (a 437% and a 353% relative increase in grain biomass, respectively, with and without fertilization). Besides, the more rustic cultivar, a local landrace adapted to diverse and difficult conditions, responded the best to earthworms in terms of total biomass, while a modern common cultivar responded the best in term of grain biomass. This suggests that cultivars could be selected to amplify the benefit of biochar- and earthworm-based practices. Overall, selecting new cultivars interacting more closely with soil organisms and soil heterogeneity could increase agriculture sustainability, fostering the positive feedback loop between soils and plants that has evolved in natural ecosystems.     

Assessment of Viral Contamination of Five Brazilian Artisanal Cheese Produced from Raw Milk: a Randomized Survey

Food and Environmental Virology - Enteric viruses have been described as important contaminants in fresh and ready-to-eat foods such as sandwiches, deli meat and dairy products. This is a...     

Synthesis and application of graphene oxide as a nanoadsorbent to remove Cd (II) and Pb (II) from water: adsorption equilibrium,kinetics, and regeneration

Environmental Science and Pollution Research - In this work, graphene oxide (GO) was synthesized by the modified Hummers method. The nanomaterial was characterized by FTIR and Raman spectroscopy,...     

A model of Cellular Automata for the spatial and temporal analysis of Citrus Sudden Death with the fuzzy parameter

Citrus Sudden Death (CSD) is a disease that has affected sweet orange trees grafted on Rangpur lime in the south of Minas Gerais state and in the north of São Paulo state (Brazil). This is a worrying characteristic because the Rangpur lime responds to 85% of the Brazilian citrus rootstocks. This disease is believed to be caused by a virus transmitted by aphids (vector) of the citrus. In this work, we have adopted the Cellular Automata model (CA) to study the temporal evolution of the disease. We take into account the effect of the wind in the space covered by the aphid. To establish the relationship between the space covered by the aphid and the intensity of the wind, we have adopted the rule-based fuzzy system. Simulations were performed and compared to real data. Through the use of the mean absolute error (MAE) method, it was possible to verify a 70% of similarity between our model of data and the real one.     

Heavy metals' content of automotive shredder residues (ASR): evaluation of environmental risk

Every year between 8 and 9 millions of vehicles in the European Union arrive to their end of life. Car wastes can have a very high metal content, falling into hazardous waste class. A preliminary evaluation of these wastes could be made by metals' leaching test runs which is the main objective of the present study. Evaluation of the total metal content was carried out by X-ray fluorescence and the mobility of these metals using two simple standardized extractions such as the TCLP (Toxicity Characterisation Leaching Procedure) of the US EPA and the German leaching test DIN 38414-S4. Additionally, an extraction test with acetone was performed in order to recognise metals bounded to organic matter. The results show that the total metal content of the ASR can overpass the established values for inert residues. Lead and zinc contents are fairly well correlated with grain-size, whilst other metals' contents do not exhibit clear grain-size dependence.     

Air pollution inhalation during acute exercise is dependent of the body mass index and ventilation of young men

Environmental Science and Pollution Research - Obesity and physical inactivity threaten human health, and both could be solved with exercise. However, a higher amount of pollutants is inhaled...     

Evaluation of copper-induced DNA damage in Vitis vinifera L. using Comet-FISH

The contamination of soils and water with copper (Cu) can compromise the crops production and quality. Fungicides containing Cu are widely and intensively used in viticulture contributing to environmental contamination and genotoxicity in Vitis vinifera L. Despite the difficulty in reproducing field conditions in the laboratory, hydroponic solutions enriched with Cu (1, 10, 25 and 50 μM) were used in forced V. vinifera cuttings to evaluate the DNA damage in leaves of four wine-producing varieties (‘Tinta Barroca’, ‘Tinto Cão’, ‘Malvasia Fina’ and ‘Viosinho’). Alkaline comet assay followed by fluorescence in situ hybridisation (Comet-FISH) was performed with the 45S ribosomal DNA (rDNA) and telomeric [(TTTAGGG)_n] sequences as probes. This study aimed to evaluate the tolerance of the four varieties to different concentrations of Cu and to determine which genomic regions were more prone to DNA damage. The comet assay revealed comets of categories 0 to 4 in all varieties. The DNA damage increased significantly (p < 0.001) with the Cu concentration. ‘Tinto Cão’ appeared to be the most sensitive variety because it had the highest DNA damage increase in 50 μM Cu relative to the control. Comet-FISH was only performed on slides of the control and 50 μM Cu treatments. Comets of all varieties treated with 50 μM Cu showed rDNA hybridisation on the head, ‘halo’ and tail (category III), and their frequency was significantly higher than that of control. The frequency of category III comets hybridised with the telomeric probe was only significantly different from the control in ‘Malvasia Fina’ and ‘Tinta Barroca’. Comet-FISH revealed partial damage on rDNA and telomeric DNA in response to Cu but also in control, confirming the high sensitivity of these genomic regions to DNA fragmentation.

     

Photobiology of corals from Brazil’s near-shore marginal reefs of Abrolhos

Coral communities were examined from highly turbid near-shore marginal reefs of Abrolhos (Brazil) to test a paradigm previously developed from observations in clear water reefs; specifically, that coral photobiological properties follow a highly conserved linear relationship with optical depth (ζ) via preferential ‘non-photochemical’ over ‘photochemical’ dissipation of absorbed light energy. PAM flourometry in situ was used to examine the photobiology of the most dominant coral species throughout the platform surfaces and bases of Abrolhos’ characteristic ‘chapeir?es’ reef framework; however, none of the species consistently adhered to the ‘clear water paradigm’. PAM measurements further demonstrated that species conformed to two different strategies of non-photochemical energy dissipation: transient but relatively rapid for the two closely related endemic species (Mussismilia braziliensis and Mussismilia harttii) as opposed to more persistent for Montastrea cavernosa, Porites astreoides and Siderastrea stellata. Further experiments demonstrated that tolerance to anomalous stress amongst species did not correspond with the non-photochemical energy dissipation strategy present but was consistent with the relative dominance of species within the chapeir?es coral communities.     

The influence of axle position and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion

Introduction. Wheelchair configuration is an important factor influencing the ergonomics of the user–device interface and, from a biomechanical point of view, small changes in chair setup may have a positive influence on the demand on the upper limbs during manual propulsion. This study aimed to investigate the influence of the position of the rear wheels’ axle and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion. Methods. Electromyography signals of the biceps, triceps, anterior deltoids and pectoralis major were collected for 11 able-bodied subjects in a wheelchair propulsion protocol with four different wheelchair configurations (differing in axle position and the use of accessories) on a straightforward sprint and a slalom course. Results. With accessories, moving the axle forward led to a decrease in the activity of all muscles in both the straightforward sprint (significant differences in triceps, anterior deltoids and biceps) and the slalom course (significant difference in anterior deltoids and biceps). However, when propelling the chair without accessories, no difference was found related to axle position. Conclusion. Changes in wheelchair configuration can influence the ergonomics of manual wheelchair propulsion. Reducing the biomechanical loads may benefit users’ mobility, independence and social participation.     

Composition analysis of dental solid waste in Brazil

When developing proper waste management strategies, it is essential to characterize the volume and composition of solid waste. The aim of this work was to evaluate the composition of dental waste produced by three dental health services in Belo Horizonte, Minas Gerais State, Brazil. Two universities, one public and one private, and one public dental health service were selected. Waste collection took place from March to November 2007. During this period, three samples were collected from each dental health service. The total amount of dental waste produced in one day of dental work was manually separated into three categories: infectious and potentially infectious waste, accounting for 24.3% of the total waste; non-infectious waste, accounting for 48.1%; and domestic-type waste, accounting for 27.6% (percentages are for mean weights of solid waste). Our results showed that most of the waste considered as biomedical may be misclassified, consequently making the infectious waste amount appear much larger. In addition, our results suggest that the best waste minimization method is recycling, and they help to define an appropriate waste management system in all three of the dental health services involved in this study.