Elimination kinetics of perfluorohexanoic acid in humans and comparison with mouse,rat and monkey

Major fluorinated chemical manufacturers have developed new short-chain per- and polyfluorinated substances with more favorable environmental, health and safety profiles. This study provides the first evaluation of the elimination half-life of perfluorohexanoic acid (PFHxA) from the blood of humans. PFHxA biomonitoring data were obtained from a recently published study of professional ski wax technicians. These data were analyzed to provide estimates of the apparent half-life of PFHxA from humans, and comparisons were made with kinetic studies of PFHxA elimination from mice, rats and monkeys. The apparent elimination half-life of PFHxA in highly exposed humans ranged between 14 and 49 d with a geomean of 32 d. The half-lives of PFHxA in mice, rats, monkeys and humans were proportional to body weight with no differences observed between genders, indicating similar volumes of distribution and similar elimination mechanisms among mammalian species. Compared to long-chain perfluoroalkyl acid analogs, PFHxA is rapidly cleared from biota. The consistent weight-normalized elimination half-lives for PFHxA in mammalian species indicates that results obtained from animal models are suitable for establishment of PFHxA benchmark dose and reference dose hazard endpoints for use in human risk assessments.     

Determinants of parental decisions to abort for chromosome abnormalities

Parental decisions concerning the continuation of pregnancy following prenatal detection of abnormal chromosomes were evaluated for 80 patients whose diagnosis and prenatal counselling were performed in our centre. Twenty-two anomalies were diagnosed by chorionic villus sampling (CVS) and 58 by amniocentesis. The severity of the chromosome anomaly and associated ultrasound findings in the first vs. second trimester were correlated with patients' decisions. No difference was found in the likelihood of parental decisions to interrupt or continue a pregnancy between CVS and amniocentesis for either the‘severe’ or the‘questionable’ group of chromosome anomalies. Ninety-three per cent of patients with severe prognosis and 27 per cent with questionable prognosis opted for pregnancy termination (p <0·0001). The association of ultrasound anomalies and termination was highly significant (p< 0·001). The severity of the chromosome anomaly, and, to a lesser extent, the visualization of anomalies on ultrasound were the major determinants of parental decisions to terminate the pregnancy. The diagnosis of an anomaly in the first trimester was no more likely ito lead to a termination of pregnancy than in the second trimester.     

Site Sampling and Treatability Studies for Demonstration of WasteChem’s Asphalt Encapsulation Technology Under EPA’s SITE Program

ABSTRACT

Exposures from indoor environments are a major issue for evaluating total long-term personal exposures to the fine fraction (<2.5μm in aerodynamic diameter) of particulate matter (PM). It is widely accepted in the indoor air quality (IAQ) research community that biocontamination is one of the important indoor air pollutants. Major indoor air biocontaminants include mold, bacteria, dust mites, and other antigens. Once the biocontaminants or their metabolites become airborne, IAQ could be significantly deteriorated. The airborne biocontaminants or their metabolites can induce irritational, allergic, infectious, and chemical responses in exposed individuals.

Biocontaminants, such as some mold spores or pollen grains, because of their size and mass, settle rapidly within the indoor environment. Over time they may become nonviable and fragmented by the process of desiccation. Desiccated nonviable fragments of organisms are common and can be toxic or allergenic, depending upon the specific organism or organism component. Once these smaller and lighter fragments of biological PM become suspended in air, they have a greater tendency to stay suspended. Although some bioaerosols have been identified, few have been quantitatively studied for their prevalence within the total indoor PM with time, or for their affinity to penetrate indoors.

This paper describes a preliminary research effort to develop a methodology for the measurement of nonvi-able biologically based PM, analyzing for mold and ragweed antigens and endotoxins. The research objectives include the development of a set of analytical methods and the comparison of impactor media and sample size, and the quantification of the relationship between outdoor and indoor levels of bioaerosols. Indoor and outdoor air samples were passed through an Andersen nonviable cascade impactor in which particles from 0.2 to 9.0 um were collected and analyzed. The presence of mold, ragweed, and endotoxin was found in all eight size ranges. The presence of respirable particles of mold and pollen found in the fine particle size range from 0.2 to 5.25 um is evidence of fragmentation of larger source particles that are known allergens.     

Solvent Extraction Processes: A Survey of Systems in the SITE Program

Solvent extraction of contaminated soils, sludges and sediments has been successfully completed at a number of Superfund sites. Each commercialized process uses a unique operating system to extract organic contaminants from solids. These operating systems may be classified by the properties of the solvents each utilizes: (1) standard solvents, (2) near-critical fluids/liquified gases, and (3) critical solution temperature solvents. Pretreatment and post-treatment requirements vary depending upon the operating systems of the solvent extraction system. Future demonstrations of these technologies by the U.S. EPA’s Superfund Innovative Technology Evaluation Program will provide additional information regarding the efficacy of these processes.     

Variation of the Relative Humidity of Air Released from Canisters after Ambient Sampling

ABSTRACT

Dalton's law of partial pressures and the hypothesis that water vapor equilibrium in a canister is identical to that established above liquid water are used to predict the variation of the percent relative humidity (%RH) of air released from canisters used in ambient air sampling, typically 6-L canisters pressurized with 18 L of air. When (and if) the water vapor partial pressure in a canister exceeds its saturation vapor pressure, water vapor condensation begins and the condensation rate equals the sampling rate of water vapor into the canister. Under constant temperature conditions, the air subsequently released from the canister is less humid than the original sample, following the relationship %RH = 100% (6 L/V_s) for V_s> V_r, where V_s is the residual air volume (referenced to atmospheric pressure), and V_r is shown to depend on the %RH of the ambient air sample. V_r is the residual air volume at which water is completely removed (except for adsorbed water vapor) from the canister wall. For V_s < V_r, the predicted %RH is constant and equal to its value at V_r. Experimental values agree reasonably well with predictions at both high (90%) and low (34%) RH. However, experimental values are often slightly displaced (usually towards lower values of %RH) for mid-range %RH (61%) and variations in %RH near V_r change from canister to canister.     

Method Comparisons for Particulate Nitrate,Elemental Carbon,and PM2.5 Mass in Seven U.S. Cities

ABSTRACT

Methods that measure PM₂₅ mass, total particulate NO₃ ^-, and elemental carbon (EC) were evaluated in seven U.S. cities from 1997 to 1999. Sampling was performed in Bakersfield, CA; Boston, MA; Chicago, IL; Dallas, TX; Philadelphia, PA; Phoenix, AZ; and Riverside, CA. Evaluating and validating methods that measure the components of fine mass are important to the effort of establishing a speciation-monitoring network. The Harvard Impactor (HI), which measures fine particle mass, showed excellent agreement (r² = 0.99) with the PM₂₅ Federal Reference Method (FRM) for 81 24-hr samples in Riverside and Bakersfield. The HI also showed good precision (4.8%) for 243 24-hr collocated samples over eight studies.

The Aethalometer was employed in six of the sampling locations to measure black carbon (BC). These values were compared to EC as measured from a quartz filter using thermal analysis. For the six cities combined, the two methods were highly correlated (r² = 0.94; 187 24-hr samples); however, the BC values were approximately 24% less than the EC measurements consistently across all six cites. This compares well to results observed for EC/BC measurements observed in other semi-urban areas. Par-ticulate NO₃ ^- was measured using the Harvard-EPA Annular Denuder System (HEADS). This was compared to the NO₃ ^- measured from the HI Teflon (DuPont) filter to assess NO₃ ^- artifacts. Significant NO₃ ^- losses (approximately 50% of total NO₃ ^-) were found in Riverside, Philadelphia, and Boston, while minimal artifacts were observed in the other sites. Two types of HEADS configurations were employed in five cities. One system used a Na₂CO₃-coated glass fiber filter, and the other type used a nylon filter to collect volatilized NO₃ ^- from the Teflon filter. The HEADS with the Na₂CO₃-coated filter consistently underestimated the total particulate NO₃ ^- by approximately 20% compared to the nylon HEADS.     

Speciation and persistence of doxycycline in the aquatic environment: Characterization in terms of steady state kinetics

The aim of the present work was to establish the kinetics for the degradation of doxycycline in the aquatic environment with a view to arriving at a kinetic model that can be used to predict the persistence of antibiotic with confidence. The degradation of doxycycline in both water and sediment phases of aquatic microcosm experiments, as well as in distilled water control experiments, was studied over a period of 90 days. An initial 21% loss due to adsorption by the sediment was observed in the microcosm experiment soon after charging. Biphasic zero-order linear rates of degradation, attributed to microbial degradation of the free and sediment or colloidal particle-adsorbed antibiotic, were observed for both water phase (2.3 × 10^?2 and 4.5 × 10^?3 μgg^?1 day^?1) and sediment phase (7.9 × 10^?3 and 1.5 × 10^?3 μgg^?1 day^?1) of the microcosm experiment. The covered distilled water control experiment exhibited a monophasic zero-order linear rate (1.9 × 10^?3 μgg^?1 day^?1) attributed to hydrolysis, while the distilled water experiment exposed to natural light exhibited biphasic liner rates attributed to a combination of hydrolysis and photolysis (2.9 × 10^?3 μgg^?1 day^?1) and to microbial degradation (9.8 × 10^?3 μgg^?1 day^?1). A kinetic model that takes into account hydrolysis, photolysis, microbial degradation as well as sorption/desorption by colloidal and sediment particles is presented to account for the observed zero-order kinetics. The implications of the observed kinetics on the persistence of doxycycline in the aquatic environment are discussed.     

Appendix

Abstract

An atrazine‐degrading bacterial isolate (M91–3) was able to utilize simazine and cyanazine as N sources for glucose‐dependent growth. The degradation of these three 5‐triazine herbicides was also investigated in binary and ternary mixtures. The organism used atrazine and simazine indiscriminately, whereas cyanazine degradation was slow and delayed until the depletion of the two other herbicides. There was no apparent effect of other commonly used herbicides on the rate of atrazine degradation by M91–3.     

Pollutant Removal from Wood and Coal Flue Gases by Soil Treatment

If many homeowners convert to solid fuels for heating, residential flue gases will be a large source of air pollution. Control of this pollution requires an inexpensive, reliable, and effective method of flue gas treatment. One such method is to force flue gases through soil beds. Such soil treatment removes all detectable smoke, odor, and polynuclear organic matter (POM), up to 97% of the CO, and at least 97% of the SO₂ from flue gases of wood and coal combustion. The technique is low cost, reliable, almost maintenance-free, and also appears suitable for other small point sources of air pollution.     

Cooling Towers and the Environment

Measurements of natural draft cooling tower plume behavior, as well as meteorological variables, were obtained from aircraft flights near major power plants of the American Electric Power System. Persistence of the visible plume to great distances depends essentially on ambient humidity. Atmospheric stability at plume elevation was also important. Cooling tower-induced fog at ground-level was never observed in any of the tests, and aerodynamic downwash of the visible plume was absent also. The cooling towers did cause modification of natural clouds and they occasionally shadowed some local areas from the sun. Merging of the stack and cooling tower plumes was a common occurrence.